Research on Thermal Deformation of Solid Lubricated Gears for Space Deployable Mechanisms

Authors

  • Wenjun Zhang
  • Ben Gao
  • Yuanhao Chang
  • Jun Zhang
  • Zheyu Yan

DOI:

https://doi.org/10.54097/r9nysk08

Keywords:

Solid-lubricated Gear, Thermal Deformation, Normal Backlash, Space Environment

Abstract

Extreme temperature fluctuations in the space environment can cause thermal deformation of transmission components in aerospace equipment, thereby affecting the normal operation of transmission mechanisms. Focusing on gears coated with solid lubricating films, this paper conducts theoretical research and analysis related to thermal deformation. Based on the theory of thermal expansion of materials, the quantitative relationships among linear, areal, and volumetric expansion coefficients are clarified, and an equivalent conversion model between volumetric expansion and linear expansion is established. Combined with thermoelasticity, the thermoelastic equations of gears and solid lubricating coatings under temperature changes are derived, and their thermal deformation characteristics are analyzed. On this basis, the influence mechanism of temperature changes on the normal backlash of gear pairs is emphatically studied. By analyzing the thermally induced changes of parameters such as base circle radius and pressure angle, the final calculation expression of normal backlash is derived. The research results provide a theoretical basis for evaluating the meshing safety of solid-lubricated gear pairs under extreme thermal environments in space and avoiding interference risks, and have important engineering significance for ensuring the stable and reliable operation of transmission systems in aerospace deployable/retractable mechanisms.

References

[1] Ruan J, Wang X, Wang Y, et al. Study on anti-scuffing load-bearing thermoelastic lubricating properties of meshing gears with contact interface micro-texture morphology[J]. Journal of Tribology, 2022, 144(10): 101202.

[2] Douglas C E, Thite A. Effect of lubricant temperature and type on spur gear efficiency in racing engine gearbox across full engine load and speed range[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2015, 229(9): 1095-1113.

[3] Dong N, Zhou J, Tong R, et al. Study on the coupling relationship between wear and dynamics under steady uniform temperature field of planetary gear system[J]. Journal of Mechanical Science and Technology, 2023, 37(12): 6405-6428.

[4] Man B, Guo Y H, Ji G, et al. Research on Transient Thermal-Structural Coupling Characteristics and Thermal Error Prediction of Ball Screw Feed System[J]. SAE International Journal of Materials and Manufacturing, 2022, 15(4): 313-326.

[5] Ye T, Chen Z, Huang S, et al. Review of Deployable Mechanism Test Technologies Oriented Towards Deep Space Exploration[C]//IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2021, 1043(5): 052022.

[6] Cheng J, Li Z. Analysis of thermo-mechanical coupling damage behavior in long-term performance of microelectromechanical systems actuators[J]. International Journal of Damage Mechanics, 2022, 31(2): 190-214.

[7] Liu K, Ding Q, Peng H, et al. Tribological properties of multilayer DLC/MoS2 nanocomposite coatings on microtextured titanium alloy surfaces[J]. Lubricants, 2024, 12(11): 374.

[8] Fujii M, Kumar M A, Yoshida A. Influence of DLC coating thickness on tribological characteristics under sliding rolling contact condition[J]. Tribology International, 2011, 44(11): 1289-1295.

[9] Heinrichs J, Gerth J, Thersleff T, et al. Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings[J]. Tribology International, 2013, 58: 55-64.

[10] Huang W, Guan Y, Wang H, et al. Research on the dynamics of the space tubular expandable structure driving deployment unit[J]. Applied Sciences, 2023, 13(15): 8969.

[11] Handschuh R F. Thermal behavior of aerospace spur gears in normal and loss-of-lubrication conditions[C]//American Helicopter Society Annual Forum and Technology Display. 2015 (E-19044).

[12] Braumann L, de Viteri V S, Morhard B, et al. Tribology technologies for gears in loss of lubrication conditions: a review[J]. Journal of Materials Science: Materials in Engineering, 2025, 20(1): 29.

[13] Liu R, Li R, Yao Y, et al. A reconfigurable deployable spatial 8R-like mechanism consisting of four angulated elements connected by R joints[J]. Mechanism and Machine Theory, 2023, 179: 105103.

[14] Lu Y, Lu X, Ye G, et al. Thermal failure analysis of gear transmission system[J]. Journal of Failure Analysis and Prevention, 2024, 24(2): 520-537.

[15] Zhang H, Zhao X, Mei Q, et al. On-orbit thermal deformation prediction for a high-resolution satellite camera[J]. Applied Thermal Engineering, 2021, 195: 117152.

Downloads

Published

21-01-2026

Issue

Section

Articles

How to Cite

Zhang, W., Gao, B., Chang, Y., Zhang, J., & Yan, Z. (2026). Research on Thermal Deformation of Solid Lubricated Gears for Space Deployable Mechanisms. Mathematical Modeling and Algorithm Application, 8(1), 51-56. https://doi.org/10.54097/r9nysk08