Shock Plasticity and Spallation Behavior of Nanoporous Nickel
DOI:
https://doi.org/10.54097/yw6hbz75Keywords:
Nickel; Shock loading; Spallation; Nano-porous materials.Abstract
This study employs large-scale molecular dynamics simulations to investigate the dynamic response of nanoporous nickel under impact loading, focusing on the influence of porosity and void distribution on stress, velocity, temperature, and density evolution over time, as well as on spalling strength. Results indicate that the presence of voids significantly weakens the impact strength of nanoporous nickel, with greater porosity leading to more pronounced weakening effects. Differences in void distribution affect the propagation characteristics of shock waves within the material. The study further discovered that both void collapse and spalltion induce localized high temperatures. Under identical impact conditions, spalling strength decreases with increasing porosity; even at the same porosity, varying void distributions cause fluctuations in spalling strength. Furthermore, this study revealed two synergistic mechanisms of void collapse—forward flow and lateral flow—and analyzed atomic displacement characteristics between voids under varying impact intensities: At lower impact intensities, atoms primarily fill adjacent voids bilaterally; at higher impact intensities, atoms migrate along the impact direction and participate in the collapse process.
References
[1] Seitz M W, Skews B W. Effect of compressible foam properties on pressure amplification during shock wave impact[J]. Shock Waves, 2006, 15: 177-197.
[2] Evans A G, Hutchinson J W, Ashby M F. Multifunctionality of cellular metal systems[J]. Progress in materials science, 1998, 43(3): 171-221.
[3] Xiang M, Hu H, Chen J. Spalling and melting in nanocrystalline Pb under shock loading: Molecular dynamics studies[J]. Journal of applied physics, 2013, 113(14): 144312.
[4] Czarnota C, Molinari A, Mercier S. The structure of steady shock waves in porous metals[J]. Journal of the Mechanics and Physics of Solids, 2017, 107: 204-228.
[5] Bonnan S, Hereil P L, Collombet F. Experimental characterization of quasi static and shock wave behavior of porous aluminum[J]. Journal of applied physics, 1998, 83(11): 5741-5749.
[6] Erhart P, Bringa E M, Kumar M, et al. Atomistic mechanism of shock-induced void collapse in nanoporous metals[J]. Physical Review B, 2005, 72(5): 052104.
[7] Krasnikov V S, Mayer A E. Plasticity driven growth of nanovoids and strength of aluminum at high rate tension: Molecular dynamics simulations and continuum modeling[J]. International Journal of Plasticity, 2015, 74: 75-91.
[8] Krasnikov V S, Mayer A E. Plasticity driven growth of nanovoids and strength of aluminum at high rate tension: Molecular dynamics simulations and continuum modeling[J]. International Journal of Plasticity, 2015, 74: 75-91.
[9] Singh M, Singh L P, Husain A. Propagation of nonlinear travelling waves in Darcy-type porous media[J]. Acta Astronautica, 2010, 67(9-10): 1053-1058.
[10] Nield D A, Bejan A. Convection in porous media[M]. New York: springer, 2006.
[11] Madeo A, Gavrilyuk S. Propagation of acoustic waves in porous media and their reflection and transmission at a pure-fluid/porous-medium permeable interface[J]. European Journal of Mechanics-A/Solids, 2010, 29(5): 897-910.
[12] Bruck H A. A one-dimensional model for designing functionally graded materials to manage stress waves[J]. International Journal of solids and Structures, 2000, 37(44): 6383-6395.
[13] Polenov V S, Chigarev A V. Wave propagation in a fluid-saturated inhomogeneous porous medium[J]. Journal of applied mathematics and mechanics, 2010, 74(2): 198-203.
[14] Sun L, Chien C L, Searson P C. Fabrication of nanoporous nickel by electrochemical dealloying[J]. Chemistry of materials, 2004, 16(16): 3125-3129.
[15] Huber N, Viswanath R N, Mameka N, et al. Scaling laws of nanoporous metals under uniaxial compression[J]. Acta aterialia, 2014, 67: 252-265.
[16] Pia G, Delogu F. Nanoporous Au: Statistical analysis of morphological features and evaluation of their influence on the elastic deformation behavior by phenomenological modeling[J]. Acta Materialia, 2015, 85: 250-260.
[17] Shu J Y. Scale-dependent deformation of porous single crystals[J]. International Journal of Plasticity, 1998, 14(10-11): 1085-1107.
[18] Ling C, Besson J, Forest S, et al. An elastoviscoplastic model for porous single crystals at finite strains and its assessment based on unit cell simulations[J]. International Journal of Plasticity, 2016, 84: 58-87.
[19] Liu Z G, Wong W H, Guo T F. Void behaviors from low to high triaxialities: Transition from void collapse to void coalescence[J]. International Journal of Plasticity, 2016, 84: 183-202.
[20] Liao Y, Xiang M, Zeng X, et al. Molecular dynamics studies of the roles of microstructure and thermal effects in spallation of aluminum[J]. Mechanics of Materials, 2015, 84: 12-27.
[21] Zhou X W, Johnson R A, Wadley H N G. Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers[J]. Physical Review B, 2004, 69(14): 144113.
[22] Reed E J, Fried L E, Joannopoulos J D. A method for tractable dynamical studies of single and double shock compression[J]. Physical review letters, 2003, 90(23): 235503.
[23] Luo S N, Germann T C, Tonks D L. Spall damage of copper under supported and decaying shock loading[J]. Journal of Applied Physics, 2009, 106(12): 123518.
[24] Marsh S P. LASL shock Hugoniot data[M]. University of California Press, 1980.
[25] Al’Tshuler L V, Bakanova A A, Trunin R F. Shock adiabats and zero isotherms of seven metals at high pressures. 1962.
[26] Isbell W M, Shipman F H, Jones A H. Hugoniot Equation of State Measurements for Eleven Materials to Five Megabars. 1968.
[27] Rice M H, Mcqueen R G, Walsh J M. Compression of Solids by Strong Shock Waves[J]. Solid State Physics, 1958, 6:1-63.
[28] Xiang M, Cui J, Yang Y, et al. Shock responses of nanoporous aluminum by molecular dynamics simulations[J]. International Journal of Plasticity, 2016, 97:24-45.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Hu Xiang, Yi Liao, Yihan Li, Tao Wen

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.







