Spallation Behavior of Cu-Ni Nanowires Under Shock Loading

Authors

  • Jierui Jiang
  • Yi Liao
  • Xiao Zhou
  • Tao Wen

DOI:

https://doi.org/10.54097/v132av09

Keywords:

Graded Materials; Spallation; Shock Wave; Damage evolution.

Abstract

In the study of the dynamic evolution of Cu-Ni FGM NWs models, for the three functions P-FGM, E-FGM, and S-FGM, the trends of their density, temperature, velocity, and stress dynamic evolution are consistent. Throughout the impact loading process, the sample experiences a compression stage, followed by a stretching stage where the deformation gradually recovers. Finally, the tensile stress causes the sample to enter the spallation stage. In the study of the impact of the function parameter p on the model, for the P-FGM and E-FGM functions, the increase in p (the proportion of copper in the sample) leads to the formation of a denser compression zone under the impact wave, an increase in the number of voids, and a decrease in spalling strength and free surface velocity. In the S-FGM function, as p increases, under the impact loading, the model has higher density in the compression region, more voids, and lower spalling strength. At this point, the distribution of Cu dominates the influence on the sample.

References

[1] Shanmugavel P, Bhaskar G B, Chandrasekaran M, et al. An overview of fracture analysis in functionally graded materials[J]. European Journal of Scientific Research, 2012, 68(3): 412-439.

[2] Wang S S. Fracture mechanics for delamination problems in composite materials[J]. Journal of composite materials, 1983, 17(3): 210-223.

[3] Mueller E, Drašar Č, Schilz J, et al. Functionally graded materials for sensor and energy applications[J]. Materials Science and Engineering: A, 2003, 362(1-2): 17-39.

[4] Kaysser W, Bartsch M, Peters M, et al. Functional gradients for novel microstructures[J]. Adv. Sci. Technol. 31, 2002: 341-353.

[5] Noda N. Thermal stresses in functionally graded materials[J]. Journal of Thermal Stresses, 1999, 22(4-5): 477-512.

[6] Chen P Y, McKittrick J, Meyers M A. Biological materials: functional adaptations and bioinspired designs[J]. Progress in Materials Science, 2012, 57(8): 1492-1704.

[7] Studart A R. Biological and bioinspired composites with spatially tunable heterogeneous architectures[J]. Advanced Functional Materials, 2013, 23(36): 4423-4436.

[8] Studart A R. Additive manufacturing of biologically-inspired materials[J]. Chemical Society Reviews, 2016, 45(2): 359-376.

[9] Yoo D J. New paradigms in cellular material design and fabrication[J]. International Journal of Precision Engineering and Manufacturing, 2015, 16(12): 2577-2589.

[10] Yoo D J. Recent trends and challenges in computer-aided design of additive manufacturing-based biomimetic scaffolds and bioartificial organs[J]. International journal of precision engineering and manufacturing, 2014, 15(10): 2205-2217.

[11] Chen F, Jia M, She Y, et al. Mechanical behavior of AlN/Mo functionally graded materials with various compositional structures[J]. Journal of Alloys and Compounds, 2020, 816: 152512.

[12] Wagih A, Attia M A, AbdelRahman A A, et al. On the indentation of elastoplastic functionally graded materials[J]. Mechanics of Materials, 2019, 129: 169-188.

[13] Gerk C, Willert-Porada M. Development of graded composite electrodes for the SOFC[C]//Materials science forum. Trans Tech Publications Ltd, 1999, 308: 806-813.

[14] Jedamzik R, Neubrand A, Rödel J. Characterisation of electrochemically processed graded tungsten/copper composites[C]//Materials science forum. Trans Tech Publications Ltd, 1999, 308: 782-787.

[15] Ma S, Xue D, Li Q, et al. Stress analysis of solid oxide fuel cell electrodes using functional gradient materials[J]. Journal of The Electrochemical Society, 2023, 170(3): 034502.

[16] Boggarapu V, Sreekanth P S R, Peddakondigalla V B. Microstructure, mechanical and tribological properties of Al/Cu functionally graded material fabricated through powder metallurgy[J]. Journal of Engineering Research, 2024, 12(3): 502-510.

[17] Liao Y, Li P, Jia J, et al. Molecular dynamics simulation of Au-Ag nanowires under tensile loading[J]. Computational materials science, 2023, 220: 112043.

[18] Zhou A, Liu X B, Wang Q, et al. Investigation of nano-tribological behaviors and deformation mechanisms of Cu-Ni alloy by molecular dynamics simulation[J]. Tribology International, 2023, 180: 108258.

[19] Fang T H, Wu C D, Chang W J. Molecular dynamics analysis of nanoimprinted Cu–Ni alloys[J]. Applied surface science, 2007, 253(16): 6963-6968.

[20] Moita J S, Araújo A L, Correia V F, et al. Material distribution and sizing optimization of functionally graded plate-shell structures[J]. Composites Part B: Engineering, 2018, 142: 263-272.

[21] Moleiro F, Correia V M F, Araújo A L, et al. Deformations and stresses of multilayered plates with embedded functionally graded material layers using a layerwise mixed model[J]. Composites part B: engineering, 2019, 156: 274-291.

[22] Song M, Yang J, Kitipornchai S. Bending and buckling analyses of functionally graded polymer composite plates reinforced with graphene nanoplatelets[J]. Composites Part B: Engineering, 2018, 134: 106-113.

[23] Zaoui F Z, Ouinas D, Tounsi A. New 2D and quasi-3D shear deformation theories for free vibration of functionally graded plates on elastic foundations[J]. Composites Part B: Engineering, 2019, 159: 231-247.

[24] Woo J, Meguid S A. Nonlinear analysis of functionally graded plates and shallow shells[J]. International Journal of Solids and structures, 2001, 38(42-43): 7409-7421.

[25] Sachdeva C, Padhee S S. Functionally graded cylinders: Asymptotically exact analytical formulations[J]. Applied Mathematical Modelling, 2018, 54: 782-802.

[26] Praveen G N, Reddy J N. Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates[J]. International journal of solids and structures, 1998, 35(33): 4457-4476.

[27] Shishesaz M, Hosseini M. Mechanical behavior of functionally graded nano-cylinders under radial pressure based on strain gradient theory[J]. Journal of Mechanics, 2019, 35(4): 441-454.

[28] Zhao Y, Zhang Y, Li Y, et al. Rapid and large-scale synthesis of Cu nanowires via a continuous flow solvothermal process and its application in dye-sensitized solar cells (DSSCs)[J]. RSC advances, 2012, 2(30): 11544-11551.

[29] Foiles S M, Baskes M I, Daw M S. Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys[J]. Physical review B, 1986, 33(12): 7983.

[30] Bonny G, Pasianot R C, Malerba L. Fitting interatomic potentials consistent with

[31] hermodynamics: Fe, Cu, Niandtheir alloys[J]. Philosophical Magazine, 2009, 89(34-36):

[32] Jin Z H, Paulino G H. Transient thermal stress analysis of an edge crack in a functionally graded material[J]. International Journal of Fracture, 2001, 107(1): 73-98.

[33] Jin Z H, Batra R C. Stress intensity relaxation at the tip of an edge crack in a functionally graded material subjected to a thermal shock[J]. Journal of thermal stresses, 1996, 19(4): 317-339.

[34] Jin Z H, Batra R C. Stress intensity relaxation at the tip of an edge crack in a functionally graded material subjected to a thermal shock[J]. Journal of thermal stresses, 1996, 19(4): 317-339

[35] Demaske B J, Zhakhovsky V V, White C T, et al. A new nickel EAM potential for atomistic simulations of ablation, spallation, and shockwave phenomena[C]//AIP Conference Proceedings. American Institute of Physics, 2012, 1426(1): 1211-1214.

[36] Marsh S P. LASL shock Hugoniot data[M]. University of California Press, 1980.

Downloads

Published

21-01-2026

Issue

Section

Articles

How to Cite

Jiang, J., Liao, Y., Zhou, X., & Wen, T. (2026). Spallation Behavior of Cu-Ni Nanowires Under Shock Loading. Mathematical Modeling and Algorithm Application, 8(1), 92-104. https://doi.org/10.54097/v132av09