Changes in Welding Angle and Current Voltage
DOI:
https://doi.org/10.54097/ajst.v7i3.12718Keywords:
Welding groove, Current, Voltage.Abstract
This article mainly studies the impact of changes in the angle of the weld seam groove on the welding current and voltage during welding. Different angles of the groove are selected for zigzag welding using a welding gun. The simulation results show that there is a significant change in current and voltage during the actual welding process as the angle of the groove changes. At the same time, it can also be derived in reverse based on the changes in current and voltage.
Downloads
References
Huo Houzhi, Huang Cheng, Zhang Yucai, et al. Research on the calculation method of welding process parameters for arc welding robots [J]. Welding Pipe, 2015 (8): 34-37.
Xu Jianning, Zhang Hua, Hu Jinhua, et al. The relationship between welding process parameters and weld geometry size in fusion welding rapid prototyping [J]. Welding Technology, 2008, 37 (4): 10-13.
Zhang Mingmin, Hu Yue, Wu Jiayun, et al The effect of electron beam welding parameters on the morphology of small penetration welds in high-temperature alloys [J] Hot working process, 2017 (1): 233-235.
Xie Qingsheng, Wang Yingjun Analysis of Factors Influencing the Quality of Welding Products by Welding Process Specification Parameters [J] Gansu Science and Technology, 2006, 22 (9): 85-86.
Zuo Shiwei, Yu Zhishui, Jing Nan Factors affecting welds [J] Journal of Shanghai University of Engineering and Technology, 2010, 24 (3): 272-274.
Chen Ying. Design and Development of an Experimental Device and Measurement and Control System for Adjusting the Height of a Coal Mining Machine [D]. Huainan: Anhui University of Science and Technology, 2019.
Su Qiang. Research on Leakage Control of the Hydraulic System of the MXG350 Coal Mining Machine Traction Part [D] Guiyang: Guizhou University, 2008.
Yang Ming. Carbon dioxide gas shielded welding construction technology [J]. Shanxi Architecture, 2012, 38 (19): 123-125.
Song Sijun. Discussion on CO2 gas shielded welding operation technology for inclined 45 ° pipe to pipe butt joint with flux cored welding wire [J]. Education, 2014 (4): 59-60.
