Structural Reliability Analysis of Microsphere Focused Logging Tool Based on Response Surface Method
DOI:
https://doi.org/10.54097/kantnp13Keywords:
Push-back system; Response surface analysis; six sigma module; Reliability analysis.Abstract
The push-pull system of microsphere focused logging tool is an important moving mechanism of this type of logging tool. The push-pull system will periodically bear large loads under working conditions and is prone to stress concentration. The structural strength reliability of the push-pull system is related to the logging accuracy and even the success or failure of the logging task. Based on ANSYS workbench software, this paper first conducts modeling and static simulation on the push-pull system of microsphere focused logging tool under working conditions, then conducts sensitivity analysis and experimental design on the basis of this analysis, and then conducts response surface analysis on the key stressed components of the push-pull system according to the analysis results. Finally, six sigma module is used to analyze the reliability of the push-pull system, and the structural strength reliability of the push-pull system is given by the probability distribution table obtained from the analysis. The analysis results show that the maximum equivalent stress occurs on the link arm of the push-pull system under working condition. The strength reliability of the link arm of the push-pull system under current working condition is high, and it can meet the daily logging requirements. However, there is still room for further design optimization.
Downloads
References
Feng Bin. Microspheres focused logging tool to push on system design and research [D]. Xi 'an petroleum university, 2021. The DOI: 10.27400 /, dc nki. Gxasc. 2019.000031.
Dou Jinai, Liao Shengjun, Yan Yutao et al. Focus on a new type of microspheres measuring plate design and application [J]. Journal of oil pipe and instrument, 2020, 6 (5) : 7 to 11. DOI: 10.19459 / j.carol carroll nki. 61-1500 / te. 2020.05.002.
Ren Tao, Feng Bin, Sun Wen, et al. The optimal transmission Angle of the tool back up system optimization design [J]. Journal of mechanical design and manufacturing, 2021 (01) : 54-58, DOI: 10.19356 / j.carol carroll nki. 1001-3997.2021.01.013.
bai-qing Yang. Single arm of push on mechanics study [J]. Journal of logging technology, 1988 (05) : 41 and 46 + 78. DOI: 10.16489 / j.i SSN. 1004-1338.1988.05.008.
ZHANG Guangzhou, Sun Yucai, Luo Xianyin. Research on reliability design method of petroleum logging instruments [J]. Petrochemical Technology,2019,26(07):314+201.
WEI Wei, Li Fang, PEI Xiange et al. Performance analysis of self-locking mechanism of 3106XC microsphere focused logging instrument [J]. Petroleum Instruments,2003(05):32-33+61.
Ren Tao, Feng Bin, Sun Wen, et al. Analysis and study on dynamic characteristics of logging instrument mechanism [J]. Journal of Southwest Petroleum University (Natural Science Edition),2019,41(05):169-180.
Lelievre N,Beaurepaire P,Mattrand C,et al.AK-MCSi: A Kriging-based method to deal with small failure probabilities and time-consuming models[J] Structural Safety,2018, 73:1-11
Li Li, Zhang Sai, He Qiang et al. Application of response surface method in experimental design and optimization [J]. Laboratory Research and Exploration,2015,34(08):41-45. (in Chinese)
Wang Han. Parametric uncertainty finite element model based on response surface Correction research [D]. Nanjing university of aeronautics and astronautics, 2023. The DOI: 10.27239 /, dc nki. Gnhhu. 2021.001157.
Qin Datong, Xie Liyang. Fatigue Strength and Reliability Design [M]. Beijing: Chemical Industry Press, 2013:139-142.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Academic Journal of Science and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.