Research on Skeleton Plate Flatness Detection Method Based on Laser Sensor

Authors

  • Hongchao Xia
  • Hongchang Sun
  • Yongxiang Jiang
  • Wanling He
  • Chao Li

DOI:

https://doi.org/10.54097/ajst.v3i3.2836

Keywords:

Seismic isolation support skeleton plate, Laser sensor, Flatness.

Abstract

 The flatness of the seismic isolation support skeleton plate determines the seismic isolation performance of the seismic isolation support, and in view of the limitations of the traditional measurement method in the engineering field, the use of laser sensor and computer-related processing technology is proposed to solve the problem of flatness measurement of the seismic isolation support skeleton plate. The laser sensor measurement can obtain the data of the skeleton plate plane, and use the relevant tools to calculate the difference between the maximum offset value and the minimum offset value from each measurement point to the ideal plane to obtain the flatness value. The experimental results show that the flatness measurement method of seismic isolation support skeleton plate based on laser sensor can quickly and accurately complete the measurement of skeleton plate flatness, with low requirements for engineering application environment and good measurement stability.

References

LIU Guiping. Review and prospect of earthquake prediction in China[J]. Urban and Disaster Reduction, 2020(06):5-9.

WANG Xiaojia,GAO Jun,WANG Lei. Review of laser triangulation[J]. Chinese Journal of Scientific Instrument, 2004(S2):601-604,608.

Pierce D.S., Ng T.S., Morrison B.R. A novel laser triangulation technique for high precision distance measurement[J]. Industry Applications Society Annual Meeting, 1992(2):1762-1769.

ZHOU Jianping, Planarity Evaluation Method Based on Matlab and Regression Analysis[J]. Ordnance Automation, 2006(01):27-28.

ZHANG Fang, Least squares analysis of flatness error[J]. Machinery Manufacturing and Automation. 2002(03):17-19.

LUO Shengbin, SONG Chunhua, WEI Xingping, et al. Review of Development of Non-contact Measurement Technology[J]. Machine Tool & Hydraulics, 2013(23):150-153.

QIN Yu. Research on three-dimensional measurement technology of elevator guide rail based on binocular vision[D]. Wuxi: Jiangnan University, 2017.

WEI Xiaomei. Research on two-dimensional laser displacement measurement technology based on FPGA and ARM[D]. Harbin: Harbin Institute of Technology, 2014.

ZHANG Hao. Research on digital detection and evaluation algorithm of flatness error[D]. Changsha: Hunan University, 2016.

DONG Xuepeng. Research on non-contact flatness error detection system for elevator hall door[D]. Hebei University of Technology,2017.

Downloads

Published

16 November 2022

How to Cite

Xia, H., Sun, H., Jiang, Y., He, W., & Li, C. (2022). Research on Skeleton Plate Flatness Detection Method Based on Laser Sensor. Academic Journal of Science and Technology, 3(3), 130–133. https://doi.org/10.54097/ajst.v3i3.2836

Issue

Section

Articles