Failure Determination and Failure Region Location Algorithm of TBM Cutter Head based on SVDD

Jiacan Xu; Shiyu Xing; Binbin Hu; Peng Zhou

doi:10.54097/jid.v3i1.8472

Authors

Jiacan Xu
Shiyu Xing
Binbin Hu
Peng Zhou

DOI:

https://doi.org/10.54097/jid.v3i1.8472

Keywords:

Tunnel Boring Machine (TBM), Cutting Tool System, Pattern Recognition

Abstract

In the TBM system, the tool system failure is an important factor affecting its driving efficiency. In order to improve the maintenance efficiency of the tool system, this paper designed the failure simulation test platform of the TBM tool system, and according to the force changes of the cutter head when the hob fails in different areas, proposed the tool system failure region location diagnosis algorithm based on SVDD, in order to judge the failure state of the cutter head system and locate the failure region. Experimental results show that the cutter head failure determination and failure region location algorithm proposed in this paper can effectively identify the cutter head region where the failure hob is located.

Downloads

Download data is not yet available.

References

Benardos A G, Kaliampakos D C. Modelling TBM performance with artificial neural networks[J]. Tunnelling and Underground Space Technology,2021,4(1): 78-84.

Zhang C, Liang M, Song X, et al. Generative adversarial network for geological prediction based on TBM operational data[J]. Mechanical Systems and Signal Processing,2019,4(28).

Hu M, Zhou H, Zhang Y, et al. Acoustic emission monitoring on damage evolution of surrounding rock during headrace tunnel excavation by TBM[J]. European Journal of Environmental and Civil Engineering, 2019, 23(10): 1248-1264.

Jin Dalong, Shen Zhichao, Yuan Dajun. Effect of Spatial Variability on Disc Cutters Failure During TBM Tunneling in Hard Rock[J]. Rock Mechanics and Rock Engineering, 20, 53 (10).

Sun W, Ling J, Huo J, et al. Dynamic characteristics study with multi degree-of-freedom coupling in TBM cutterhead system based on complex factors[J]. Mathematical Problems in Engineering, 2013.

Wang L, Kang Y, Zhao X, et al. Disc cutter wear prediction for a hard rock TBM cutterhead based on energy analysis[J]. Tunnelling and Underground Space Technology,2015,50:55.

Chen X, Feng Z. Order spectrum analysis enhanced by surrogate test and vold-kalman filtering for rotating machinery fault diagnosis under time-varying speed conditions[J]. Mechanical Systems and Signal Processing, 2021, 154(331): 107585.

Nicholas J Y L, Lee H J. Numerical analysis of hybrid photovoltaic-thermal systems utilizing different spectral bandpass filters[J]. Renewable Energy, 2019, 144: 15-29.

Abd-El-Malek M B, Hanna S S. The Hilbert transform of cubic splines [J]. Communications in Nonlinear Science and Numerical Simulation, 2019, 80:104983.

Xu H Y, Shen Q B, Jin W F, et al. Radial Hilbert transform for phase retrieval using two-wavelength three-frame phase-shifting interferometry[J]. Optics and Lasers in Engineering, 2020, 124: 649-660.

Geng Q, He F, Lu Z, et al. Geometry evolution of mesoscopic mechanical structures during the rock fragmentation process induced by tunnel boring machine (TBM) cutters[J]. Royal Society Open Science, 2022, 9(1): 211630.