Study on removal performance of Fe3+ by biomass-based activated carbon and Liquefaction of Poplar Sawdust catalyzed by ferro activated Carbon

Authors

  • Kai Luo
  • Ziqin Chen
  • Yunfei Liu
  • Huamei Yang

DOI:

https://doi.org/10.54097/2e75fe78

Keywords:

Biomass; Activated carbon; Heavy metal ions; Adsorb.

Abstract

The adsorption experiment of iron ions on biomass based nut shell activated carbon was conducted to explore the adsorption capacity of iron ions on biomass based activated carbon and the key influencing factors: pH value, initial concentration of solution and adsorption time on the adsorption effect of activated carbon. The preparation of supported catalyst of activated carbon iron and its influence on the effect of catalytic liquefaction of poplar sawdust were investigated. The results showed that the optimal pH value of Fe3+ solution adsorbed by activated carbon was 5.0. The adsorption rate of activated carbon decreased with the increase of initial ion concentration, and the adsorption equilibrium of activated carbon reached at 250min. The optimum concentration of poplar sawdust liquefaction catalyzed by iron supported on activated carbon is between 6mg/L and 10mg/L.

Downloads

Download data is not yet available.

References

Hüseyin. Karaca, Cemil Koyunoğlu, Ali Özdemir, et al. Co-processing behavior of Gölbaşı lignite and poplar sawdust by factorial experimental design method. 2019, 183:1040-1048.

Murugesan Rajesh, Ramu Manikandan, Seungil Park, et al. Pinecone biomass‐derived activated carbon: the potential electrode material for the development of symmetric and asymmetric supercapacitors. 2020, 44(11):8591-8605.

H. Karaca, M. Acar, M. Yilmaz, et al. Co-liquefaction of the Elbistan Lignite and Poplar Sawdust. Part I: The Effect of the Liquefaction Parameters. 2009, 31(1):31-38.

Hawaiah Imam Maarof, Wan Mohd Ashri Wan Daud, Mohamed Kheireddine Aroua. Effect of varying the amount of binder on the electrochemical characteristics of palm shell activated carbon. 2017, 210(1)

Lili Fan, Lixia Ling, Baojun Wang, et al. The adsorption of mercury species and catalytic oxidation of Hg 0 on the metal-loaded activated carbon. 2016, 520:13-23.

Cínthia S. Castro, Mário C. Guerreiro, Luiz C. A. Oliveira, et al. Remoção de compostos orgânicos em água empregando carvão ativado impregnado com óxido de ferro: ação combinada de adsorção e oxidação em presença de H2O2 Removal of organic compounds from water by activated carbon impregnated with iron oxide: combined action of adsorption and oxidation in the presence of H2O2. 2009, 32(6):1561-1565.

Xiaonan Duan, Dr. Genggeng Qi, Prof. Peng Wang, et al. A Highly Efficient and Selective Polysilsesquioxane Sorbent for Heavy Metal Removal. 2012, 13(10):2536-2539.

Xiaoqin Zou, Guangshan Zhu, Hailing Guo, et al. Effective heavy metal removal through porous stainless-steel-net supported low siliceous zeolite ZSM-5 membrane. 2009, 124(1):70-75.

Mothe Gopi Kiran, Kannan Pakshirajan, Gopal Das. Heavy metal removal from aqueous solution using sodium alginate immobilized sulfate reducing bacteria: Mechanism and process optimization. 2018, 218:486-496.

Mengzhou Zhou, Yi Zhang, Xin Li, et al. Complete genome sequence of Kocuria flava strain HO-9041, a heavy metal removal bacterium from Xinjiang. 2016, 220:21-22.

Downloads

Published

12-03-2024

Issue

Section

Articles