Prediction of the Modal Parameters of The Spindle System in High-speed Dry Hobbing Machine with Thermal Effects
DOI:
https://doi.org/10.54097/75k4zg23Keywords:
High-speed dry hobbing, Spindle system, Time-varying thermal effects, Modal parameters, Multi-output Gaussian Process regression.Abstract
High-speed dry hobbing is an advanced green machining technology for gears. However, thermal issues in the machine tools become serious under the high cutting speed and dry cutting conditions, which result in a nonlinear evolution of the machine tool dynamics, and finally affect the hobbing stability. In view of this, introducing the hob spindle system as the object, this paper intends to investigate the influence of time-varying temperatures on the modal parameters based on the modal tests. Then, a temperature-dependent modal parameters prediction model based on the multi-output Gaussian process regression (MOGPR) is proposed. The experimental results indicated that the modal parameters of the spindle system vary obviously with changing thermal states. The natural frequencies for the first and third modes increased with the temperature rise, while the variation of the natural frequency for the second mode was insignificant. The damping ratios for the first three modes showed a decreasing trend with the temperature rise. The constructed MOGPR model has the capability to effectively predict the modal parameters with the time-varying thermal effects, which can provide a support to build the temperature-dependent hobbing stability boundaries.
Downloads
References
Cao Huajun, Li Xianguang, Chen Peng. The Theory and Key Technology of Green high-speed dry hobbing Process [M]. Chongqing: Chongqing University Press, 2016: 2-7.
CAO H, ZHU L, LI X, et al. Thermal error compensation of dry hobbing machine tool considering workpiece thermal deformation [J]. International Journal of Advanced Manufacturing Technology, 2016, 86(5-8): 1-13.
MAYR J, JEDRZEJEWSKI J, UHLMANN E, et al. Thermal issues in machine tools [J]. CIRP Annals - Manufacturing Technology, 2012, 61(2): 771–91.
ZAGHBANI I, SONGMENE V. Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis [J]. Pergamon, 2009, (12).
Yang Xiao, Cao Huajun, Chen Yongpeng, et al. Entire process transfer model of cutting heat in high-speed dry gear hobbing process system [J]. Journal of Mechanical Engineering, 2015, 51(19): 189-96.
LI B, CAO H, YANG X, et al. Thermal energy balance control model of motorized spindle system enabling high-speed dry hobbing process [J]. Journal of Manufacturing Processes, 2018, 35(OCT.): 29-39.
ZHU X L, BENJIE. Multi-variable driving thermal energy control model of dry hobbing machine tool [J]. The International Journal of Advanced Manufacturing Technology, 2017, 92(1a4).
YANG X, CAO H, LI B, et al. A thermal energy balance optimization model of cutting space enabling environmentally benign dry hobbing - ScienceDirect [J]. Journal of Cleaner Production, 2018, 172: 2323-35.
GE Z D, XIAOHONG. Thermal error control method based on thermal deformation balance principle for the precision parts of machine tools [J]. The International Journal of Advanced Manufacturing Technology, 2018, 97(1a4).
ABELE E, ALTINTAS Y, BRECHER C. Machine tool spindle units [J]. CIRP Annals - Manufacturing Technology, 2010, 59(2): 781-802.
MA C, YANG J, ZHAO L, et al. Simulation and experimental study on the thermally induced deformations of high-speed spindle system [J]. Appl Therm Eng, 2015, 86: 251-68.
Yan Zongzhuo, Tao Tao, Hou Ruisheng, et al. Research on convolution modeling of thermal characteristics of machine tool spindle [J]. Journal of Xi'an Jiaotong University, 2019, 53(6): 1-9.
GE Z, DING X. Design of thermal error control system for high-speed motorized spindle based on thermal contraction of CFRP [J]. Int J Mach Tools Manuf, 2018, 125: 99-111.
GRAMA S N, MATHUR A, BADHE A N. A model-based cooling strategy for motorized spindle to reduce thermal errors [J]. Int J Mach Tool Manu, 2018, 132: 3-16.
ZHENG D, CHEN W. Thermal performances on angular contact ball bearing of high-speed spindle considering structural constraints under oil-air lubrication [J]. Tribology International, 2017, 109: 593-601.
LI B, CHEN Y, YANG X, et al. Influence of thermal effect on dynamic behavior of high-speed dry hobbing motorized spindle system [J]. Journal of Mechanical Science and Technology, 2022, (5): 36.
ZHANG, YANFEI, LI, et al. Uneven heat generation and thermal performance of spindle bearings [J]. Tribology International, 2018.
STEIN J L, TU J F. A State-Space Model for Monitoring Thermally Induced Preload in Anti-Friction Spindle Bearings of High-Speed Machine Tools [J]. Journal of Dynamic Systems Measurement & Control, 1994, 116(3): 372-86.
LIN C W, TU J, KAMMAN J. An integrated thermo-mechanical-dynamic model to characterize motorized machine tool spindles during very high speed rotation [J]. International Journal of Machine Tools & Manufacture, 2003, 43: 1035-50.
LI B, LI L, HE H, et al. Research on modal analysis method of CNC machine tool based on operational impact excitation [J]. The International Journal of Advanced Manufacturing Technology, 2019.
LIU H, CAI J, ONG Y S. Remarks on multi-output Gaussian process regression [J]. Knowledge-Based Systems, 2017, 144(mar.15): 102-21.
LEI Y, HOU T, DING Y. Prediction of the Posture-Dependent Tool Tip Dynamics in Robotic Milling Based on Multi-Task Gaussian Process Regressions [J]. Robotics and Computer Integrated Manufacturing, 2023.
ZHOU P, XU Z, PENG X, et al. Long-term prediction enhancement based on multi-output Gaussian process regression integrated with production plans for oxygen supply network [J]. Comput Chem Eng, 2022, 163: 107844.
CHEN B, SHEN L, ZHANG H. A hybrid proper orthogonal decomposition-heteroscedastic sparse Gaussian process regression model for evaluating structural reliability with correlated stochastic material properties [J]. Structural safety, 2023.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Academic Journal of Science and Technology

This work is licensed under a Creative Commons Attribution 4.0 International License.








