Study on the Wear Characteristics of Angular Contact Ball Bearings
DOI:
https://doi.org/10.54097/5v1rsv20Keywords:
Proposed statics; Rolling bearings; Bearing wear; Archard model.Abstract
For the wear of rolling bearings, this paper establishes a wear model of angular contact ball bearings based on the proposed static mechanics of rolling bearings, kinematics of rolling bearings and Archard's wear theory, studies the wear of bearings, and analyses the effects of rotational speed, load and structural parameters on the wear of bearings. The results show that: the inner ring of the bearing is uniformly worn and the depth of wear is larger than the outer ring; the depth of wear of the inner ring of the bearing increases with the increase of rotational speed, the load has a certain effect on the depth of wear, the depth of wear increases with the increase of axial load; the structural parameters of the bearings have a certain effect on the wear, the depth of wear of the inner ring decreases with the increase of the radius of curvature of the internal grooves, the radius of curvature of the internal grooves has a small effect on the outer ring wear, and the selection of appropriate structural parameters can effectively reduce the wear of the bearings, the wear of the bearings can be reduced. Selection of appropriate structural parameters can effectively attenuate the wear.
Downloads
References
LiXin Xu, Y.-g.L. Modeling of a deep-groove ball bearing with waviness defects in planar multibody system [J]. Multibody System Dynamics, 2014.
LiXin Xu, Y.Y. Modeling a non-ideal rolling ball bearing joint with localized defects in planar multibody systems [J]. Multibody System Dynamics, 2015.
Machado, T.H., Cavalca K.L. Modeling of hydrodynamic bearing wear in rotor-bearing systems [J]. Mechanics Research Communications, 2015, 69: 15-23.
El-Thalji, I., Jantunen E. Dynamic modelling of wear evolution in rolling bearings [J]. Tribology International, 2015, 84: 90-99.
Chasalevris, A.C., Nikolakopoulos P.G., Papadopoulos C.A. Dynamic Effect of Bearing Wear on Rotor-Bearing System Response [J]. Journal of Vibration and Acoustics, 2013, 135(1).
Liu C H, Chen X Y, Gu J M, et al. High-speed wear lifetime analysis of instrument ball bearings [J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2009, 223(3): 497-510.
Gertzos, K.P., Nikolakopoulos P.G., Chasalevris A.C., et al. Wear identification in rotor-bearing systems by measurements of dynamic bearing characteristics [J]. Computers & Structures, 2011, 89(1): 55-66.
Gupta, P.K. Advanced Dynamics of Rolling Elements [M]. Germany: Springer-verlag, 1984
Harris, T.A. Essential Concepts of Bearing Technology [J]. rolling bearing analysis, 2006, 200.
El-Thalji, I., Jantunen E. A descriptive model of wear evolution in rolling bearings [J]. Engineering Failure Analysis, 2014, 45: 204-224.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Academic Journal of Science and Technology

This work is licensed under a Creative Commons Attribution 4.0 International License.








