Numerical Simulation of Heat Transfer in A Vibrating Body Strengthened Tube

Authors

  • Zhi Chen
  • Yunqiao Luo

DOI:

https://doi.org/10.54097/d8p84v41

Keywords:

Enhanced heat transfer; OpenFOAM; vibrating body; Nusselt number; immersed boundary method.

Abstract

To improve the heat transfer efficiency of the heat exchanger, we studied adding a moving vibrating body inside the pipeline to enhance the heat transfer efficiency. Based on the immersed boundary method and the application of OpenFOAM, we focused on enhancing heat transfer inside pipes with vibrating bodies, analyzed the forced convection heat transfer mechanism under fluid structure coupling, and further explored the influence of various parameter changes on the enhanced heat transfer performance inside pipes. Results show that the presence of vibrating body does indeed improve the heat transfer efficiency inside the tube in a degree, and different parameters can change this value. The motion of the vibrating body will change the motion path and flow velocity of the fluid, thereby increasing the average Nusselt number on the wall surface; The temperature difference between the wall of the pipeline and the fluid can greatly affect this heat transfer efficiency. Although the change in the average Nusselt number of the wall caused by the change in the shape of the vibrating body is not significant, it may be due to imperfect modeling in this simulation.

Downloads

Download data is not yet available.

References

[1] C.Z. Man, J.N. Hu, S.X. Yu. Numerical simulation of the enhanced heat transfer performance of a new twisted belt in laminar flow [J]. Thermal Science and Technology, 2019, 18(01): 42-49. (In Chinese)

[2] J.C. Han, L.R. Glicksman, W.M. Rohsenow, An investigation of heat transfer and friction for rib-roughened surfaces, Int. J. Heat Mass Transfer 21 (1978) 1143–1156.

[3] D.L. Gee, R.L. Webb, Forced convection heat transfer in helically rib-roughened tubes, Int. J. Heat Mass Transfer 23 (1980) 1127–1136.

[4] J.X. Zhu, M. Fiebig, N.K. Mitra, Numerical investigation of turbulent flows and heat transfer in a rib-roughened channel with longitudinal vortex generators, Int. J. Heat Mass Transfer 38 (1995) 495–501.

[5] Glowinski R, Pan T-W, Hesla T. A distributed lagrange multiplier/fictitious domain method for particulate fows. Int J Multiphase Flow 1999;25: 755–94.

[6] Cheny Y, Botella O. Set method for the computation of incompressible viscous flows in complex moving geometries with good conservation properties. J Comp Phys 2010;229: 1043–76.

[7] Peskin CS. Flow patterns around heart valves: a numerical method. J Comp Phys 1972;10(2):252–71.

[8] Minguez M, Pasquetti R, Serre E. High-order large-eddy simulation of flow over the ahmed body car model. Phys Fluids 2008;20.

[9] Isoardi L, Chiavassa G, Ciraolo G. Penalization modeling of a limiter in the tokamak edge plasma. J Comp Phys 2010;229: 2220–35.

[10] Constant E, Favier J, Meldi M, et al. An immersed boundary method in OpenFOAM: verification and validation[J]. Computers & Fluids, 2017, 157: 55-72.

[11] C.S. Peskin, Flow patterns around heart valves: a numerical method, J. Comput. Phys. 10 (1972) 252–271.

Downloads

Published

15-05-2025

Issue

Section

Articles