Study on Stress-Strain Response Characteristics of Hydraulic Fracturing in Deep Coal Mines

Authors

  • Yuming Zhao

DOI:

https://doi.org/10.54097/12wdgv88

Keywords:

Hydraulic fracturing; coal seam permeability enhancement; stress-strain monitoring; principal stress.

Abstract

To investigate the evolution law of stress and strain during hydraulic fracturing, hollow inclusion stress-strain gauges were used to monitor the variations in stress and strain before and after hydraulic fracturing. The results show that two hours after hydraulic fracturing, the influence range of high-pressure water extended to the monitoring borehole at 32 m, exerting the maximum impact on the stress-strain monitoring points, after which the strain tended to stabilize. Six days after hydraulic fracturing, the strain returned to a stable state with no further changes, though it remained higher than the pre-fracturing state. During hydraulic fracturing, the principal stress increments increased but with varying magnitudes. Hydraulic fracturing primarily affected the increase in vertical stress, which is related to the spatial positions of the stress-strain monitoring points and the hydraulic fracturing borehole. After fracturing, due to the gradual pressure release of the fracturing fluid, the stress increment gradually decreased and tended to recover to the original stable state, though it still remained higher than the pre-fracturing state. Hydraulic fracturing had little influence on the azimuth and dip angle of the coal-rock mass. The stress-strain behavior can provide a reference for exploring the mechanism of permeability enhancement in coal seams through hydraulic fracturing.

Downloads

Download data is not yet available.

References

[1] Ge Xi. Application Analysis of Permeability Enhancement Technology by Hydraulic Fracturing in Low-Permeability Coal Seams[J]. Energy and Energy Conservation, 2025, (04): 266-268.

[2] Li Quangui, Wang Mingjie, Yu Xu, et al. Experimental Study on Fracture Propagation Characteristics of Flow-Controlled Pulsed Hydraulic Fracturing[J]. Coal Science and Technology, 2025, 53(02): 178-189.

[3] Si Linpo. Selection Method of Stratum for In-Situ Stress Measurement by Hollow Inclusion Stress Relief Method in Underground Coal Mines[J]. Coal Mining Technology, 2015, 20(04): 18-22.

[4] Li Tianyu, Li Yuan, Qin Zhixuan, et al. Construction of Disturbed Stress Cloud Monitoring System Based on Hollow Inclusion Strain Gauges[J]. China Mining Magazine, 2021, 30(10): 96-105.

[5] Li Jinkui, Li Guang, Tian Zhaojun. Application of Hollow Inclusion in In-Situ Stress Measurement at Yuncheng Coal Mine[J]. Industrial Safety and Environmental Protection, 2019, 45(04): 15-19.

[6] Guo Shupeng, Li Yingfu. In-Situ Stress Measurement at Kouzidong Mine Based on Hollow Inclusion Strain Method[J]. Shanxi Coking Coal Science & Technology, 2024, 48(08): 18-21.

[7] Kang Hongpu, Feng Yanjun. Stress Monitoring and Evolution Law of Coal Body in Working Face During Directional Hydraulic Fracturing[J]. Journal of China Coal Society, 2012, 37(12): 1953-1959.

[8] Huang Fei, Li Shuqing, Zuo Weiqin. Stress Monitoring and Evolution Law of Coal Seam Roof During Underground Hydraulic Fracturing[J]. Mineral Engineering Research, 2018, 33(3): 23-27.

Downloads

Published

21-05-2025

Issue

Section

Articles