A Review of Vehicle - to - Grid (V2G) Technology with Low Power - grid Impact

Authors

  • Xiaojie Sun

DOI:

https://doi.org/10.54097/spvbz820

Keywords:

Vehicle to Network Interaction (V2G) technology; Power grid impact; Low power grid impact technology; Intelligent algorithm control.

Abstract

Vehicle - to - grid (V2G) technology, as the key to achieving bidirectional energy flow between electric vehicles and the power grid, has enormous potential in improving energy utilization efficiency and promoting the development of smart grids. However, its large-scale application faces many challenges, especially the impact on the power grid. This article comprehensively reviews the voltage fluctuations, frequency deviations, harmonic pollution, and load forecasting challenges caused by V2G technology in the power grid, and explores in depth the corresponding low power grid impact technology strategies. This article elaborates on the methods of reducing power grid impact through intelligent algorithm control (fuzzy control, model predictive control, neural network control).Research has shown that these strategies have their own advantages and disadvantages in addressing the impact of V2G technology on the power grid. In the future, V2G technology needs to further improve its standard system, enhance market acceptance, and continuously optimize low grid impact technologies to achieve efficient and coordinated development with the power grid.

Downloads

Download data is not yet available.

References

[1] Liu, G.C., Liu, X.B., Li, Z.M., Liu, X.M. (2023) Research on charge and discharge control strategy of electric vehicles in V2G mode. Pure Mathematics, 13: 2764.

[2] Liu, X.F., Zhang, Q.F., Cui, S.M. (2012) Overview of V2G technologies for electric vehicles. Transactions of China Electrotechnical Society, 27(2): 121–127.

[3] Clement-Nyns, K., Haesen, E., Driesen, J. (2009) The impact of charging plug-in hybrid electric vehicles on a residential distribution grid. IEEE Transactions on power systems, 25(1): 371–380.

[4] Alshareef, S.M., Morsi, W.G. (2017) Impact of fast charging stations on the voltage flicker in the electric power distribution systems. In: 2017 IEEE Electrical Power and Energy Conference (EPEC). IEEE, pp. 1-6.

[5] Huang, L., Chen, D., Lai, C.S., Huang, Z., Zobaa, A.F., Lai, L.L. (2022) A distributed optimization model for mitigating three-phase power imbalance with electric vehicles and grid battery. Electric Power Systems Research, 210: 108080.

[6] Tian, W., He, J., Niu, L., Zhang, W., Wang, X., Bo, Z. (2012) Simulation of vehicle-to-grid (V2G) on power system frequency control. In: IEEE PES Innovative Smart Grid Technologies. IEEE, pp. 1-3.

[7] Zhang, Y.J. (2004) Review of DC/AC inverter technology and its applications. Electrical Switches, 42(6): 18–22.

[8] Li, Y.D. (1996) Pulse Width Modulation (PWM) Techniques: A Review, Current Status and Prospects. Electric Transmission, 26(3): 2–12.

[9] Tan, Y.B., Yu, X.L., Zang, Y., Wang, H.T., Li, J.H. (2023) Effect of harmonic current on winding loss and temperature distribution characteristics of converter transformer. Transactions of China Electrotechnical Society, 38(2): 542–553.

[10] Bao, N.N., Liu, X.B. (2023) Optimization strategy for orderly charging and discharging of electric vehicles under time-of-use electricity price. Electric Power Science and Engineering, 39(2): 14–20.

[11] Li, X.Y. (2010) Analysis of the principle and application of fuzzy control system. Science & Technology Information, (9): 105–106.

[12] Su, H.B., Cao, Y., Chang, H.S. (2016) A V2G control method based on fuzzy logic. Henan Electric Power, 44(10): 31–35.

[13] Qin, S.J., Badgwell, T.A. (2003) A survey of industrial model predictive control technology. Control engineering practice, 11(7): 733–764.

[14] Zhang, J.L. (2004) Fuzzy-Neural Network Control Principles and Engineering Applications. Harbin Institute of Technology Press, Harbin, pp. 81-86.

Downloads

Published

21-05-2025

Issue

Section

Articles