Control Strategy for the DC-DC Converter in Fuel Cell Vehicles.
DOI:
https://doi.org/10.54097/b2qey781Keywords:
Fuel Cell Vehicle (FCV), DC-DC, On-Board Charge, Genetic Alorithm, Neural Network PID Control.Abstract
A BP neural network PID control strategy optimized based on a genetic algorithm is proposed to meet the requirements of a wide buck-boost range, low input current ripple, and a wide input voltage range for fuel cell vehicle buck-boost converters. By leveraging the global optimization capability of the genetic algorithm, the optimal initial weights of the BP neural network are calculated, avoiding the issue of local optima caused by dependence on initial weights during the BP neural network iteration process. Simulation experiments were conducted in MATLAB/Simulink, and the results show that compared with the traditional PID control strategy and the BP neural network PID control strategy, the system's response time was reduced by 62.5% and 59.46%, respectively, in the absence of load disturbances. When load disturbances were introduced, the system's average error was reduced by 81.36% and 25.57%, respectively, demonstrating the stronger robustness and the faster recovery to the desired voltage value. These results indicate that the proposed control strategy exhibits strong robustness and disturbance rejection, fast response speed, and high accuracy.
Downloads
References
[1] Ouyang, M., & Li, Y. (2025). Perspectives on new energy revolution in China. CSEE Journal of Power and Energy Systems, 11(6), 2623–2638. https://doi.org/10.17775/CSEEJPES.2025.06840. DOI: https://doi.org/10.17775/CSEEJPES.2025.06840
[2] Xie, Z. (2025). Optimization of new energy vehicle industry structure based on optimization link prediction similarity algorithm and CGE. IEEE Access, 13, 47722–47733. https://doi.org/10.1109/ACCESS.2025.3547735 DOI: https://doi.org/10.1109/ACCESS.2025.3547735
[3] Patel, N., Lopes, L. A. C., Li, X., & Rathore, A. K. (2026). A novel current-fed soft-switched DC–DC converter for vehicle-to-vehicle energy exchange. IEEE Journal of Emerging and Selected Topics in Industrial Electronics, 7(2), 743–754. https://doi.org/10.1109/JESTIE.2026.3656509 DOI: https://doi.org/10.1109/JESTIE.2026.3656509
[4] Reddy, R. M., Gupta, H., & Das, M. (2025). Multioutput DC–DC converter with optimal torque distribution for split drive electric vehicle applications. IEEE Journal of Emerging and Selected Topics in Industrial Electronics, 6(3), 1166–1171. https://doi.org/10.1109/JESTIE.2025.3556575 DOI: https://doi.org/10.1109/JESTIE.2025.3556575
[5] Lizana, A., Pereda, J., Rubio, F., & Rojas, F. (2025). Finite control set model predictive current control (FCS-MPCC) of three-port converter for fuel cell hybrid electric vehicles. IEEE Transactions on Vehicular Technology, 74(2), 2706–2714. https://doi.org/10.1109/TVT.2024.3476924 DOI: https://doi.org/10.1109/TVT.2024.3476924
[6] Filba-Martinez, A., Busquets-Monge, S., & Bordonau, J. (2020). Modulation and capacitor voltage balancing control of multilevel NPC dual active bridge DC-DC converters. IEEE Transactions on Industrial Electronics, 67(4), 2499–2510. DOI: https://doi.org/10.1109/TIE.2019.2910035
[7] Huang, A. Q., & Chen, C. (2026). Converter PWM switch (CPS): A new PWM switch concept. IEEE Transactions on Power Electronics, 41(1), 185–189. https://doi.org/10.1109/TPEL.2025.3605520 DOI: https://doi.org/10.1109/TPEL.2025.3605520
[8] Gu, X., Liu, Y., Zhang, G., Cao, Y., & Xia, C. (2025). Multimode carrier-based PWM strategy of open-end winding PMSM with isolated DC sources. IEEE Transactions on Power Electronics, 40(1), 1826–1835. https://doi.org/10.1109/TPEL.2024.3475475 DOI: https://doi.org/10.1109/TPEL.2024.3475475
[9] Song, M.-S., & Kim, H. (2025). One-leg half-bridge diode-clamped four-level PWM inverter based on MNRV PWM. IEEE Access, 13, 155778–155796. https://doi.org/10.1109/ACCESS.2025.3605879 DOI: https://doi.org/10.1109/ACCESS.2025.3605879
[10] Panuganti, K., Mishra, R., Figarado, S., & Agarwal, V. (2025). Improved bus clamping PWM schemes for modular multilevel converters with reduced switching losses and capacitor voltage ripple. IEEE Journal of Emerging and Selected Topics in Power Electronics, 13(6), 7396–7405. https://doi.org/10.1109/JESTPE.2025.3621704 DOI: https://doi.org/10.1109/JESTPE.2025.3621704
[11] Jiang, H., et al. (2025). Efficient two-step PFM process employing novel crossed fields combination. IEEE Transactions on Applied Superconductivity, 35(7), 1–7. https://doi.org/10.1109/TASC.2025.3596783 DOI: https://doi.org/10.1109/TASC.2025.3596783
[12] Tay, S.-Y., Adrian, V., & Chang, J. S. (2026). A subminiature light-load efficient integrated DC--DC converter featuring high inductance density bond-wire inductor and low quiescent current PFM controller. IEEE Journal of Solid-State Circuits, 61(10), 5812–5824. https://doi.org/10.1109/JSSC.2026.3703599 DOI: https://doi.org/10.1109/JSSC.2026.3703599
[13] Soares, J. W. M., Tonolo, É. A., & Badin, A. A. (2026). Integration of Vienna rectifier and SC-PFM for soft-switching current sensorless PFC with simplified control. IEEE Transactions on Industrial Electronics, 73(2), 1536–1547. https://doi.org/10.1109/TIE.2025.3607969 DOI: https://doi.org/10.1109/TIE.2025.3607969
[14] Wang, C., Gao, J., Zhang, T., Liu, J., & Chen, Z. (2026). Fast accurate measurement of time-domain metrics for baseband flexible PAM-N signals with interconnect behavioral modeling. IEEE Transactions on Instrumentation and Measurement, 75, 1–4. https://doi.org/10.1109/TIM.2026.3659657 DOI: https://doi.org/10.1109/TIM.2026.3659657
[15] Kang, T., Yang, J., Song, E., Son, S., Kim, H., & Han, J. (2025). A 96-Gb/s 1.6-Vppd PAM-8 transmitter with high-swing and low-loading cascaded driver in 40-nm CMOS technology. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 33(7), 2084–2088. https://doi.org/10.1109/TVLSI.2025.3563497 DOI: https://doi.org/10.1109/TVLSI.2025.3563497
[16] Kalvapalli, S. R., Jeyasenthil, R., Kobaku, T., & Siwakoti, Y. (2026). Quantitative feedback design based robust 2-DOF PID control of voltage mode controlled DC–DC buck converter with unstructured uncertainty and sensor noise suppression. IEEE Journal of Emerging and Selected Topics in Industrial Electronics, 7(2), 570–580. https://doi.org/10.1109/JESTIE.2026.3650794 DOI: https://doi.org/10.1109/JESTIE.2026.3650794
[17] Prakash, S., Singh, R., Dwivedi, D., Ghosh, S., & Chinmaya, K. A. (2026). Mode-dependent model predictive control for multi-source converter. IEEE Transactions on Industry Applications, 62(1), 1197–1209. https://doi.org/10.1109/TIA.2025.3591581 DOI: https://doi.org/10.1109/TIA.2025.3591581
[18] Bagheri, F. (2026). Cascaded terminal super twisting sliding mode control for DC–DC SEPIC converters. IEEE Transactions on Industrial Electronics, 73(2), 3221–3231. https://doi.org/10.1109/TIE.2025.3608035 DOI: https://doi.org/10.1109/TIE.2025.3608035
[19] Campos, M. W. d. S., et al. (2025). Development of a hybrid fractional-order fuzzy-PID controller applied to a DC-DC buck converter. IEEE Transactions on Circuits and Systems II: Express Briefs, 72(9), 1218–1222. https://doi.org/10.1109/TCSII.2025.3585464 DOI: https://doi.org/10.1109/TCSII.2025.3585464
[20] Yang, Z., & He, L. (2025). Neural network control based on nonlinear autoregressive exogenous model and adaptive dynamic programming algorithm for high-gain DC-DC converter. IEEE Transactions on Industrial Electronics, 72(12), 14128–14137. https://doi.org/10.1109/TIE.2025.3566758 DOI: https://doi.org/10.1109/TIE.2025.3566758
[21] Liu, Y., Wang, X., & Pang, N. (2025). Predefined-time nonsingular adaptive control for DC–DC boost converter with experimental verification. IEEE Journal of Emerging and Selected Topics in Industrial Electronics, 6(4), 1448–1458. https://doi.org/10.1109/JESTIE.2025.3582831 DOI: https://doi.org/10.1109/JESTIE.2025.3582831
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Academic Journal of Science and Technology

This work is licensed under a Creative Commons Attribution 4.0 International License.








