Research on Integrated Protection Technology for Cable Channel Operation
DOI:
https://doi.org/10.54097/cgmt1a19Keywords:
Finite space; integration; protective equipment; heart dadt; monitor.Abstract
The emergency protection requirements of cable channel operation involve all levels of the power grid system, including the power production and consumption system composed of power transformation, transmission, distribution and electricity consumption, as well as the installation, maintenance, inspection, inspection and painting operations of substations, converter stations and transmission lines. Due to the difficulty of perceiving the operation status of the power grid cable channel and the high rescue requirements, the emergency protection ability of the construction unit of the cable channel does not match and adapt to the actual situation, and the problems such as habitual violations of the on-site personnel still exist.
Downloads
References
[1] Li, M., & Liu, Y. (2006). Underground structure monitoring with wireless sensor networks [Master’s thesis, Hong Kong University of Science and Technology].
[2] Luke, R. A. (1992). Diamonds with dispatch: Computerized LHD dispatching at Debeerfinsch-Aprogressre port. World Mining Equipment, 960, 24–28.
[3] Zhu, G. (2018). Application of improved RSSI weighted centroid algorithm in downhole personnel location. China Mining Industry, 27(12), 198–201.
[4] Wang, R. (2018). Research on underground personnel positioning system based on ZigBee [Master’s thesis, Henan Polytechnic University].
[5] Sun, L., Li, J., & Chen, Y. (2005). Wireless sensor networks. Tsinghua University Press.
[6] Hu, C. (2008). A MAC protocol for wireless sensor networks with traffic bursts [Master’s thesis, Wuhan University of Technology].
[7] Li, W. (2007). Introduction and practical application of ZigBee wireless network technology. Beihang University Press.
[8] Wang, G. (2015). Design of wireless communication module in underground mine [Master’s thesis, China University of Petroleum (East China)].
[9] Zhang, J., Niu, M., & Wang, J. (2010). Technology innovation based on KJ4N safety monitoring system. Zhongzhou Coal, 12, 72–73.
[10] Qiao, F. (2007). Research and design of underground mine positioning communication system based on frequency hopping technology [Master’s thesis, Harbin Engineering University].
[11] Shi, Y. (2017). Overview of coal mine gas safety monitoring system. Science and Technology Wind, 18.
[12] Hu, Q., Yang, W., Ding, E., & et al. (2019). Current situation and trend of communication technology for coal mine emergency rescue. Journal of Communications, 40(5), 167–183.
[13] Wang, L., Zhang, G., & Yang, X. (2019). RFID technology and application. Tianjin University Press.
[14] Lin, Y. (2009). Design and implementation of hierarchical multi-parameter monitoring wireless sensor network for coal mine environment and its interconnection [Master’s thesis, Beijing Jiaotong University].
[15] Lin, Y. (2009). Implementation and interconnection of grid-type multi-parameter wireless sensor monitoring network for coal mine environment [Master’s thesis, Beijing Jiaotong University].
[16] Meng, Y., Li, J., & Zhang, M. (2018). Miner status monitoring equipment based on LSTM edge computing and random forest fog decision making. Coal Mine Machinery, 39(11), 144–148.
[17] Wang, L., Li, S., Gao, Z., & et al. (2014). Driver fatigue classification based on particle swarm optimization and support vector machine. Journal of Harbin Institute of Technology, 46(12), 102–107.
[18] Guo, P., Jiang, T., & Zhang, K. (2012). Novel energy-efficient miner monitoring system with duty-cycled wireless sensor networks. International Journal of Distributed Sensor Networks, 1, 1–12.
[19] Sun, W., Zhang, X., Peeta, S., He, X., & Li, Y. (2017). A real-time fatigue driving recognition method incorporating contextual features and two fusion levels. IEEE Transactions on Intelligent Transportation Systems, 18(12), 3408–3420.
[20] Mandal, B., Li, L., Wang, G. S., & Lin, J. (2017). Towards detection of bus driver fatigue based on robust visual analysis of eye state. IEEE Transactions on Intelligent Transportation Systems, 18(3), 545–557.
[21] Haque, M. A., Irani, R., Nasrollahi, K., & Moeslund, T. B. (2016). Facial video-based detection of physical fatigue for maximal muscle activity. IET Computer Vision, 10(4), 323–329.
[22] Wang, S., Jia, B., Chen, W., & et al. (2018). Research on model for assessment of dynamic risk in confined space working and its application. China Safety Science Journal, 28(8), 87–92.
[23] Renevey, P., Vetter, R., Krauss, J., & et al. (2001). Wrist-located pulse detection using IR signals, activity and nonlinear artifact cancellation. In International Conference of the IEEE Engineering in Medicine & Biology Society (Vol. 3, pp. 3030–3033). IEEE.
[24] Wartzek, T., Vogel, S., Hennig, T., & et al. (2009). Analysis of heart rate variability with an in-ear micro-optic sensor in view of motion artifacts. In Sixth International Workshop on Wearable and Implantable Body Sensor Networks (pp. 168–172). IEEE.
[25] Mendelson, Y., Duckworth, R. J., & Comtois, G. (2006). A wearable reflectance pulse oximeter for remote physiological monitoring. In International Conference of the IEEE Engineering in Medicine and Biology Society (pp. 912–915). IEEE.
[26] Anliker, U., Ward, J. A., Lukowicz, P., & et al. (2004). AMON: A wearable multiparameter medical monitoring and alert system. IEEE Transactions on Information Technology in Biomedicine, 8(4), 415–427.
[27] Chuo, Y., Marzencki, M., Hung, B., & et al. (2010). Mechanically flexible wireless multisensor platform for human physical activity and vitals monitoring. IEEE Transactions on Biomedical Circuits and Systems, 4(5), 281–294.
[28] Faugeras, O. D., & Toscani, Q. (1986). The calibration problem for stereo. In IEEE Computer Society Conference on Computer Vision and Pattern Recognition (pp. 15–20). IEEE.
[29] Tsai, R. Y. (1987). A versatile camera calibration technique for high accuracy 3D machine vision metrology using off-the-shelf cameras and lens. In IEEE Transactions on Robotics and Automation (pp. 323–344). IEEE.
[30] Zhang, Z. (2000). A flexible new technique for camera calibration. IEEE Transactions on Pattern Analysis and Machine Intelligence, 22(11), 1330–1334.
[31] Faugeras, O. D., Luong, Q. T., & Maybank, S. J. (1992). Camera self-calibration: Theory and experiments. Lecture Notes in Computer Science, 588, 321–334.
[32] Collins, R., Lipton, A., & Kanade, T. (2000). Introduction to the special section on video surveillance. IEEE Transactions on Pattern Analysis and Machine Intelligence, 22(8), 745–746.
[33] Collins, R., Lipton, A., & et al. (2000). A system for video surveillance and monitoring: VASAM final report [Technical report CMU-RI-TR-00-12]. Carnegie Mellon University, Robotics Institute.
[34] Remagnino, P., Tan, T., & Baker, K. (1998). Multi-agent visual surveillance of dynamic scenes. Image and Vision Computing, 16(8), 529–532.
[35] Freeman, W., & Weismann, C. (1995). Television control by hand gestures. In Proceedings of the International Conference on Automatic Face and Gesture Recognition (pp. 179–183). IEEE.
[36] Maggioni, C., & Kemmerer, B. (1998). Gesture computer: History, design, and applications. In Computer vision for human-machine interaction. Cambridge University Press.
[37] Philipson, W. (1997). The manual of photographic interpretation. American Society for Photogrammetry and Remote Sensing.
[38] Lillesand, T. M., Kiefer, R. W., & Chipman, J. W. (2004). Remote sensing and image interpretation. John Wiley & Sons Ltd.
[39] Prati, A., Mikic, I., Trivedi, M. M., & et al. (2003). Detecting moving shadows: Algorithms and evaluation. IEEE Transactions on Pattern Analysis and Machine Intelligence, 25(7), 918–923.
[40] Sanin, A., Sanderson, C., & Lovell, B. C. (2012). Shadow detection: A survey and comparative evaluation of recent methods. Pattern Recognition, 45(4), 1684–1695.
[41] Xiang, E., Wang, K., Nie, D., Ren, M., Li, J., & Yang, Q. (2021). Research on intelligent anti-burst monitoring technology based on cable vibration signal characteristics. Yunnan Electric Power Technology, 3.
[42] Feng, Y., Zhang, S., Jiang, J., & Fang, J. (2022). Research and application of cable intelligent high voltage grounding box. Electric Times, 4.
[43] Xiang, E., Wang, K., Nie, D., Ren, M., Li, J., & Yang, Q. (2020). Research on anti-burst monitoring technology of intelligent cable based on vibration characteristics. Electrical Measurement and Instrumentation, 24.
[44] Yao, Q., Gu, X., Xu, P., Xie, X., Liang, B., Shi, Y., Ji, F., & Zhou, L. (2022). Development of high strength torsion-resistant anti-mold wind energy cable. Optical Fiber and Cable and its Application Technology, 1.
[45] Wang, X., Zhang, Q., Chen, L., Yin, J., & Li, Y. (2021). Application of time domain reflectometry to nuclear grade cable condition monitoring. Application of Electronic Technology, S1.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Academic Journal of Science and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
