Sensorless Control of a Permanent-Magnet Synchronous Motor Based on Incremental Deadbeat Predictive Current Control and an Adaptive Sliding-Mode Observer

Authors

  • Guoqing Xiang School of Mechanical Engineering, Xihua University, Chengdu 610039, China
  • Xiao Zeng
  • Liang Zheng School of Mechanical Engineering, Xihua University, Chengdu 610039, China

DOI:

https://doi.org/10.54097/bx4zv198

Keywords:

Permanent Magnet Synchronous Motor; Incremental Deadbeat Predictive Current Control; Sliding-mode Observer.

Abstract

To address the strong dependence of conventional deadbeat predictive current control on motor parameters and the effect of observation errors on rotor-angle estimation during sensorless operation, this paper investigates a permanent-magnet synchronous motor (PMSM) control method that combines incremental deadbeat predictive current control with an adaptive sliding-mode observer. First, an incremental predictive model is derived by taking the difference between the discrete current equations of two consecutive sampling periods, thereby reducing the influence of parameter mismatches in the permanent-magnet flux linkage and stator resistance on predictive control. In addition, the one-sampling-period delay inherent in digital control is taken into account, and compensating voltage commands are generated using historical current and voltage information. Subsequently, a sliding-mode observer based on adaptive back-electromotive-force estimation and a phase-locked loop is designed, and its stability is analyzed using a Lyapunov-based approach. Simulation results show that, under the permanent-magnet flux-linkage and stator-resistance mismatch conditions considered in this study, the proposed incremental deadbeat predictive current control achieves a smaller steady-state q-axis current deviation than conventional deadbeat predictive current control. Under the specified speed-tracking and sudden-load-application conditions, the adaptive sliding-mode observer exhibits lower speed ripple and a smaller steady-state rotor-angle estimation error than the conventional sliding-mode observer, while its estimated speed tracks the actual motor speed more closely.

Downloads

Download data is not yet available.

References

[1] Zhao, X., Wang, H., & Jin, H. (2025). Model predictive current control based on discrete space vector modulation for PMSM. Electric Machines and Control, 29(3), 50–58+73. https://doi.org/10.15938/j.emc.2025.03.005.

[2] Zhang, L., Zhu, X., Gao, J., & et al. (2019). Design and analysis of new five-phase flux-intensifying fault-tolerant interior-permanent-magnet motor for sensorless operation. IEEE Transactions on Industrial Electronics, 67(11), 9338–9347. https://doi.org/10.1109/TIE.2019.2955407 DOI: https://doi.org/10.1109/TIE.2019.2955407

[3] Zhang, Y., Xu, B., Wei, H., & et al. (2023). New model reference adaptive deadbeat predictive current control of PMSM. Electric Machines and Control, 27(9), 157–167. https://doi.org/10.15938/j.emc.2023.09.017

[4] Li, P., Duan, G., Zhang, B., & et al. (2024). Event-triggered control for servo motor systems based on fully actuated system approach and dynamical compensator. IEEE Transactions on Industrial Electronics, 71(12), 15404–15413. https://doi.org/10.1109/TIE.2024.3515273 DOI: https://doi.org/10.1109/TIE.2024.3515273

[5] Chen, B., & Chen, M. (2013). AC speed control systems (3rd ed.). China Machine Press.

[6] Wei, Y., Mao, J., Zhang, C., & et al. (2024). Permanent magnet synchronous motor servo system based on disturbance-rejection-enhanced generalized predictive control. Control and Decision, 39(6), 1967–1976. https://doi.org/10.13195/j.kzyjc.2022.1834

[7] Sun, X., Cao, J., Lei, G., & et al. (2021). A robust deadbeat predictive controller with delay compensation based on composite sliding-mode observer for PMSMs. IEEE Transactions on Power Electronics, 36(9), 10428–10439. https://doi.org/10.1109/TPEL.2021.3063226 DOI: https://doi.org/10.1109/TPEL.2021.3063226

[8] Ma, Z., & Kennel, R. (2013). Continuous set nonlinear model predictive control for PMSM drives. 2013 15th European Conference on Power Electronics and Applications (EPE), 1–10. https://doi.org/10.1109/EPE.2013.6631873 DOI: https://doi.org/10.1109/EPE.2013.6631873

[9] Zhang, S., Lei, L., Zhang, C., & et al. (2023). An improved deadbeat predictive current control method for SPMSM drives with a novel adaptive disturbance observer. Journal of Beijing Institute of Technology (English Edition), 32(1), 107–123. https://doi.org/10.15918/j.jbit1004-0579.2022.080

[10] Xu, W. (2025). Research on sensorless vector control technology for permanent magnet synchronous motors over the full speed range [Doctoral dissertation]. Jiangsu University. https://doi.org/10.27170/d.cnki.gjsuu.2025.001586

[11] He, J., Zhang, W., & Zhai, L. (2023). Sensorless model predictive flux control of AFFSPM machine based on improved sliding mode observer. Proceedings of the CSEE, 43(3), 1189–1200. https://doi.org/10.13334/j.0258-8013.pcsee.212463

[12] Gao, X. (2025). Research on sensorless control strategies for permanent magnet synchronous motors based on a sliding mode observer [Doctoral dissertation]. Xiangtan University. https://doi.org/10.27426/d.cnki.gxtdu.2025.001238

[13] Wang, H., Zhao, C., Wan, D., & et al. (2019). Sensorless control of permanent magnet synchronous motor based on nonsingular fast terminal sliding mode observer. Electric Machines & Control Application, 46(1), 28–33.

[14] Lu, X., Lin, H., Feng, Y., & et al. (2015). Soft switching sliding mode observer for PMSM sensorless control. Transactions of China Electrotechnical Society, 30(2), 106–113. https://doi.org/10.19595/j.cnki.1000-6753.tces.2015.02.014

Downloads

Published

30-10-2026

Issue

Section

Articles