Analysis of Welding Simulation Methods for Large Weldments
DOI:
https://doi.org/10.54097/vcakzs81Keywords:
Welding method, birth death element method, residual stress, efficiency.Abstract
In response to the problems of long simulation time and low efficiency in the optimization process of welding process parameters for large welded parts, this paper analyzes the application of the birth and death element method and the non birth and death element method in the circumferential weld of ball valves using fully welded ball valves as carriers. The difference between the two methods in the key indicators of residual stress and deformation after welding is 17.8% and 6%, respectively, and the distribution pattern is consistent. Moreover, the birth and death element method is more in line with the actual process. Based on the analysis results, the large birth and death element method was proposed to simulate the welding process. The simulation results showed that using the large birth and death element method can improve the simulation efficiency by 28% and 12.5% respectively compared to the birth and death element method and non birth and death element method, while ensuring the accuracy of the welding simulation results.
Downloads
References
[1] Liu Xiaobao, Yan Qingxiu, Yao Tingqiang, et al. Optimization of process parameters based on ensemble learning and improved particle swarm optimization[J/OL] China Mechanical Engineering, 1-14 [2022-11-12].
[2] Yin Xiqin, Gao Zicheng, Li Lijun, etc Spindle Multi-objective Optimization Design Based on Response Surface and MOGA [J] Machine Tool & Hydraulics, 2024, 52 (12): 98-103+156.
[3] Wang Wang, Research on Optimization of Welding Process of Fully Welded Ball Valve Based on Thermal-mechanical Coupling Simulation and Physical Experiment [D] Sichuan University of Science & Engineering, 2021.
[4] Huang Bo, Wang Wang, Wang Jia, et al. Numerical simulation on welding residual stress and deformation of all-welded ball valves [J]Oil & Gas Storage and Transportation, 2021, 40 (08): 895-902.
[5] Lin Haitao, Yu Shengfu, Wang Hongyun, et al. Optimization of Process Parameters and Study on Mechanical Properties of Valve Ring Welding Based on Robot Welding [J/OL] Hot processing technology, 2025, (01): 33-38+44 [2024-11-12].
[6] Zhang Guizhi, Zhang Liping, and Zhan Xiaohong The influence of weld bead filling method on welding deformation and welding residual stress [J]. Welding Technology, 2017, 46 (10): 16-19. DOI: 0.13846/j.cnki.cn12-1070/tg.2017.10.004.
[7] Zhang Liang, Guo Yuli, Qi Lei The influence of weld bead filling method on numerical simulation of residual stress in X65 pipeline steel circumferential weld [J]. Welding Technology, 2020, 49 (06): 5-8. DOI: 10.13846/j.cnki. cn12-1070/tg.2020.06.002.
[8] Dai Hao, Han Haibo, Liu Xiangbo, etc Research on Finite Element Simulation and Process Optimization of Single Tube Exhaust Pipe Welding [J/OL]. Material Introduction, 1-7 [2022-12-18].
[9] Peng Fei, Wang Meng, Yang Xiuxiu, etc Finite element numerical simulation analysis and sequential optimization of welding of large vibrating screen beam [J]. Industrial Technology and Vocational Education, 2024, 22 (05): 9-13+43. DOI: 10.16825/j.cnki. cn13-1400/tb. 2024.05.021.
[10] Shen Wei, Guo Jiaxing, Yin Le Laser Welding Heat Source Simulation Optimization and Residual Stress Simulation Analysis [J/OL]. Journal of Jilin University (Engineering Edition), 1-9 [2024 -12-18]
[11] Chen Tianxi, Lu Lili, Lin Tengfei, etc Simulation of Welding Process of Titanium Alloy Tube Plate Based on ABAQUS [J]. Welding Machine, 2024, 54 (09): 96-104.
[12] Liu Congyue, Bu Mingzhe, Zhang Jie, etc Numerical simulation study on stress of pipeline welding joints in steep mountainous areas [J]. Welding Machine, 2024, 54 (08): 108-117.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
