Research Progress on Preparation Process Optimization and Porous Modification of Boron-Doped Diamond Electrodes
DOI:
https://doi.org/10.54097/5c3dh798Keywords:
Boron-doped diamond electrode; preparation process; parameter control; Porous design.Abstract
The refractory organic wastewater is difficult to be completely purified by the process, and the BDD electrode has become a high-efficiency electrocatalytic oxidation anode due to its excellent electrochemical performance. In this paper, the physicochemical and electrochemical characteristics of BDD electrodes are introduced, the high temperature and high pressure synthesis method and various chemical vapor deposition methods are summarized and compared, and the regulation effect of hot filament chemical vapor deposition process parameters on the film performance is analyzed, and two porous modification strategies, top-down etching and bottom-up porous substrate deposition, are classified and described, and their application effects in the degradation of organic pollutants are described. It is analyzed that the large-scale application of BDD electrodes has problems such as high cost, difficulty in large-area film formation, and disconnection between laboratory research and engineering implementation. It is proposed that the catalytic performance, preparation cost, and new composite porous structure need to be optimized in the future to improve the efficiency of wastewater treatment. Process improvement and industrialization provide theoretical support.
Downloads
References
[1] Zhang, L., Peng, W., Wang, W., et al. (2024). A comprehensive review of the electrochemical advanced oxidation processes: Detection of free radical, electrode materials and application. Journal of Environmental Chemical Engineering, 113778.
[2] Yamaguchi, C., Natsui, K., Iizuka, S., et al. (2019). Electrochemical properties of fluorinated boron doped diamond electrodes via fluorine containing plasma treatment. Physical Chemistry Chemical Physics, 21(25), 13788 13794.
[3] Lin, Y., Shen, W., Fang, C., et al. (2024). High pressure and high temperature synthesized boron doped diamond electrodes for effective waste water treatment. Journal of the European Ceramic Society, 44(7), 4570 4579.
[4] An, K., Chen, L., Yan, X., et al. (2018). Fracture behavior of diamond films deposited by DC arc plasma jet CVD. Ceramics International, 44(11), 13402 13408.
[5] Gao, X., Li, W., Mei, R., et al. (2019). Effect of the B₂H₆/CH₄/H₂ ratios on the structure and electrochemical properties of boron doped diamond electrode in the electrochemical oxidation process of azo dye. Journal of Electroanalytical Chemistry, 832, 247 253.
[6] Guo, L., & Chen, G. (2007). Long term stable Ti/BDD electrode fabricated with HFCVD method using two stage substrate temperature. Journal of the Electrochemical Society, 154(12), D657.
[7] Jia, F., Bai, Y., Fang, Q., et al. (2010). The influence of gas pressure and bias current on the crystallinity of highly boron doped diamond films. New Carbon Materials, 25(5), 357 362.
[8] Song, C. W., You, M. Y., Lee, J. M., et al. (2020). Electrochemical properties and chemical oxygen demand depending on the thickness of boron doped diamond. Coatings, 10(11), 1097.
[9] Li, D., Li, J., Yu, X., et al. (2023). Combination of porous structure and MnO₂ modification for improving capacitance of planar BDD electrode. Journal of Electroanalytical Chemistry, 944, 117647.
[10] Ohashi, T., Zhang, J., Takasu, Y., et al. (2011). Steam activation of boron doped diamond electrodes. Electrochimica Acta, 56(16), 5599 5604.
[11] Shi, C., Li, C., Li, M., et al. (2016). Fabrication of porous boron doped diamond electrodes by catalytic etching under hydrogen–argon plasma. Applied Surface Science, 360, 315 322.
[12] Li, X., Li, H., Li, M., et al. (2018). Preparation of a porous boron doped diamond/Ta electrode for the electrocatalytic degradation of organic pollutants. Carbon, 129, 543 551.
[13] Tang, Y., Liu, M., He, D., et al. (2022). Efficient electrochemical degradation of X GN dye wastewater using porous boron doped diamond electrode. Chemosphere, 307, 135912.
[14] Mei, R., Wei, Q., Zhu, C., et al. (2019). 3D macroporous boron doped diamond electrode with interconnected liquid flow channels: A high efficiency electrochemical degradation of RB 19 dye wastewater under low current. Applied Catalysis B: Environmental, 245, 420 427.
[15] Wei, Q., Liu, G., Zhu, C., et al. (2020). Ordered structures with functional units (OSFU) enabled highly robust diamond anode for electrochemical decomposing of organic pollutants. Chemical Engineering Journal, 397, 125465.
[16] Miao, D., Liu, T., Yu, Y., et al. (2020). Study on degradation performance and stability of high temperature etching boron doped diamond electrode. Applied Surface Science, 514, 146091.
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

