Design of Control System for Pusher Plate Automatic Loading and Unloading Machine

Shenghu Pan; Meichang Cai; Pengjie Lv

doi:10.54097/ajst.v7i1.11298

Authors

Shenghu Pan
Meichang Cai
Pengjie Lv

DOI:

https://doi.org/10.54097/ajst.v7i1.11298

Keywords:

Loading and unloading machine, Control system, PLC.

Abstract

Aiming at the problem that the automatic loading and unloading system of the lathe is controlled by the electric control, which leads to the aging of the coil and the complicated wiring, this paper designs a control system that can automatically load and unload the material to meet the requirements of high efficiency automatic processing, stability and reliability of the lathe. This system uses Delta PLC as the controller and touch screen control to realize the automatic transmission from the loading machine to the lathe for processing, and then from the lathe to the blanking machine after processing. Equipped with pneumatic system, it can quickly and reliably realize the push and discharge actions. The system can be used in production, reduce the time of loading and unloading, and improve production efficiency.

Downloads

Download data is not yet available.

References

Liu Xudong, Li Xiaogang. Practice of NC lathe automation transformation [J]. Internal combustion engine and accessories, 2018 (17): 112-113.

Jie, Z. Fault Diagnosis Method of Relay Misoperation in Electrical Control System[J]. Internal Combustion Engine and Components, 2021(11):282-289..

Z. Application of Electrical Engineering and Its Automation in Low-voltage Electrical Apparatus Relay [J]. Digital Technology and Application, 2022(05):127-129..

Liu Linshan, Li Jianyong, Hao Ming. Design and implementation of a robot control system for automatic loading and unloading of truss for CNC machine tools [J]. Manufacturing Automation, 2019(a), 41 (9): 108-110.

Liang Yun, Tan Xiaoman. Electrical design of automatic loading and unloading system of machine tools [J]. Electromechanical Engineering Technology, 2019, 48 (6): 42-45.

Junsong, Y., Jian, Z., Gonghai, F., et al. Design of Bulk Material Hoist[J]. Mechanical Engineering and Automation, 2010(2):98-100.

Kang Jian, Cao Guoqing, Fu Lin Mine. Optimization design and application of production process with steel ladder [J]. Shandong Coal Science and Technology, 2019, 35 (10): 113-114+117.

Zheng Zedian, Chen Yinqing, Lin Wenqiang, et al. Research on the combined application of industrial robot loading and unloading technology and CNC lathe processing technology [J]. Modular machine tool and automatic processing technology, 2013 (7): 105-109.

Liu Linshan, Li Jianyong, Hao Ming. Design and implementation of a robot control system for automatic loading and unloading of truss for CNC machine tools [J]. Manufacturing Automation, 2019(b), 41 (9): 108-110.

Wei Yongqi, Ju Fengjuan. Wall-cleaning robot based on PLC [J]. Foreign Electronic Measurement Technology, 2019, 38 (9): 40-43.

Wang Xueliang, Zhang Qiuju. Design of PLC based manipulator automatic loading and unloading control system [J] China Manufacturing Informatization, 2012 (15): 59 – 62.

Chao, W., Jinyun, Y., & Dongqing, W. Study on Communication between Touch Screen and PLC in AC Charging Pile[J]. Journal of Qingdao University, 2015(03):64-69.

Jifa, C., Pengfei, L., Peng, C., et al. Design of Automatic Loading and Unloading System for Vanadium Nitride Sintering Equipment Based on PLC Control[J]. Industrial Furnace, 2022(02):55-58.

Xiayun, L., Yong, Y., & Yulong, Y. Design and Application of Automatic Loading/Unloading System for Robot in Multi-Process Machining of Outer Ring of Bearing[J]. Modern Manufacturing Engineering, 2021(07):128-134.

Zeng Wenxuan, Fan Shengyao, Wang Xueliang. Research and development of automatic loading and unloading manipulator control system of gear grinding machine [J] Modular machine tool and automatic processing technology, 2012 (11): 71-74.

Wang Youwei, Qiu Zixue, Wang Guowei Design of temperature fuse automatic feeding machine based on PLC [J] Modular machine tool and automatic processing technology, 2015 (04): 115-118.

Qinzhan, T. Design of Control System for Loading and Unloading Manipulator of Key Shaft Machining Machine[J]. Journal of Guilin University of Aerospace Technology, 2019(02):200-203.