Design of Riser System Based on Target Oilfield and Platform

Authors

  • Chuan Wang
  • Hai He
  • You Peng

DOI:

https://doi.org/10.54097/ep4k0416

Keywords:

Riser design; TTR; Force Analysis; Orcaflex; the FWPSO platform.

Abstract

 Abstract: Risers are an important component in the development of offshore oil and gas resources, but they are also one of the weakest components. Therefore, the safety of the design of deep-water riser systems plays a crucial role in the development of offshore oil and gas resources. This article focuses on the selection and initial design of riser systems based on the target oilfield and platform. Taking into account both the transportation capacity of oil and gas pipelines and the strength of casing, multiphase flow theory is used to calculate the pressure drop and transportation capacity of the riser. Based on this, the size of the oil pipe and casing is iteratively calculated. The riser design is based on the specifications and professional software Orcaflex, which is mainly used in the design process, is used for stress analysis of the riser, Taking into account the main scale of the FWPSO platform, reservoir and wellhead data, as well as the marine environment data where the riser is located, the selected oil and casing will be subjected to wall thickness design verification.

Downloads

Download data is not yet available.

References

PHAM D, SRIDHAR N, QIAN X, et al. A review on design, manufacture and mechanics of composite risers[J]. Ocean Engineering, 2016,112: 82-96.

Michael M. Bernitsas.Problems in Marine Riser Design[J]. Marine Technology, Vol. 19, No. 1, Jan. 1982, pp. 73-82

Ben G. Burke, Chevron Oil Field Research Co, et al.An Analysis of Marine Risers for Deep Water[J].

CABRERA-MIRANDA J M, PAIK J K. On the probabilistic distribution of loads on a marine riser[J]. Ocean Engineering, 2017,134: 105-118.

Carl F. Baxter, Ronald W. Schutz, and Christopher S. Caldwell , et al. Experience and Guidance in the Use of Titanium Components in Steel Catenary Riser Systems[J]. Offshore Technology Conference, April–3 May 2007.

GUESNON J, GAILLARD C, RICHARD F. Ultra Deep Water Drilling Riser Design and Relative Technology[J]. Oil & gas science and technology, 2002,57(1): 39-57.

KIRK C L, ETOK E U, COOPER M T. Dynamic and static analysis of a marine riser[J]. Applied Ocean Research, 1979,1(3): 125-135.

MAO L, LIU Q, ZHOU S, et al. Deep water drilling riser mechanical behavior analysis considering actual riser string configuration[J]. Journal of Natural Gas Science and Engineering, 2016,33: 240-254.

Chicago Bridge and Iron Co, Plainfield, IL 60544, USA.Review of riser analysis techniques[J].

WONG E W C, KIM D K. A simplified method to predict fatigue damage of TTR subjected to short-term VIV using artificial neural network[J]. Advances in Engineering Software, 2018,126: 100-109.

E.R. Fontaine, J. Rosen, H. Marcollo, et al.Using Model Test Data to Assess VIV Factor of Safety for SCR and TTR in GOM [J].

Downloads

Published

28-12-2023

Issue

Section

Articles