Experimental Research on Impact Resistance Test of Polycrystalline Diamond Compact Based on Digital Image Correlation Method

Authors

  • Yuanjing Zhao
  • Jian Shi
  • Xinfeng Xu

DOI:

https://doi.org/10.54097/951e4a53

Keywords:

Digital Image Correlation; Polycrystalline Diamond Compact; Impact resistance; Strain.

Abstract

 

In this study, the impact resistance of Polycrystalline Diamond Compact (PDC) was studied with DIT drop weight tester and high speed camera. The surface of PDC was analyzed by Digital Image Correlation (DIC). The reason of impact failure of PDC was obtained by using the surface strain field of PDC. The results show that local delamination occurs near the impact point of the polycrystalline layer. The brittle fracture occurs at the maximum tensile strain of the impact resistant composite sheet. The quantitative relationship between the surface strain and the image obtained by DIC can effectively reflect the whole process of PDC composite failure, and can reasonably explain the failure process of PDC composite, and provide scientific research methods for engineering applications.

Downloads

Download data is not yet available.

References

Zhang Fu xiao, Lu Yanjun, Xie Dou, Luo Hongbo, Shi Rui, Zhang Pei. Experimental study on the impact resistance of interface structure to PDC cutting tooth[J]. Engineering Failure Analysis, 2022, 140.

Xi Yan, Wang Wei, Zha Chunqing, Li Jun Liu Gonghui. (2022). Numerical investigations on rock breaking mechanism and parameter influence of torsional percussive drilling with a single PDC cutter.Journal of Petroleum Science and Engineering.

Zhiling Xiao, et al.Structural Design and Analysis of Large-Diameter D30 Conical Polycrystal Diamond Compact (PDC) Teeth under Engineering Rotary Mining Conditions.Materials 17.2(2024):.

Li X ,Summers D ,Rupert G , et al.Experimental investigation on the breakage of hard rock by the PDC cutters with combined action modes[J].Tunnelling and Underground Space Technology incorporating Trenchless Technology Research, 2001, 16(2): 107-114.

Wang, J.L.; Zhang, S.H.; Yang, K. Impact resistance of polycrystalline diamond compacts button insert using in DTH bit. Mater. Sci.Eng. Powder Metall. 2014, 19, 479–485.

ZHANG Tao, Lu Canhua, Dou Ming et al. Development of diamond composite sheet for high performance oil drilling [J]. Superhard Materials Engineering, 2017, 29(03): 13-18.

Sun Wei, ZHAO Haifeng, Zhang Tianxiang et al. Experimental study on improving impact resistance of diamond composite sheet [J]. Drilling & Production Technology, 2018, 41(06): 87-89+105+10.

Zhang Suhui, Wang Chuanliu, Dai Yongbo. Effect of temperature on performance of PDC cutters with different shapes [J]. Coal Geology and Exploration, 2020, 48(01): 240-245..

Qi Xianyin, Wang Shengwei, Yang Zhen et al. Research on composite rock test and damage model based on digital image [J]. Science Technology and Engineering, 2022, 22(30): 13450-13459.

Tung, S.H., Shih, M.H., Kuo, J.C. (2010). Application of digital image correlation for anisotropic plastic deformation during tension testing. Optics and Lasers in Eng., 48(5), 636−641.

A.J. Comer,K.B. Katnam,W.F. Stanley,T.M. Young. Characterising the behaviour of composite single lap bonded joints using digital image correlation[J]. International Journal of Adhesion and Adhesives, 2013, 40.

Sudarsanan N ,Arulrajah A ,Karpurapu R , et al. Digital Image Correlation Technique for Measurement of Surface Strains in Reinforced Asphalt Concrete Beams under Fatigue Loading[J]. Journal of Materials in Civil Engineering, 2019, 31(8).

Mengying Liu,Ian McCue,Michael J. Demkowicz. Quantifying surface deformation around micrometer-scale indents by digital image correlation[J]. Journal of Materials Research, 2021(prepublish).

R. P J ,Iyer R K ,Richard T , et al.DIC Based Strain and Damage Analysis of Large Scale Steel to Composite Adhesive Joints Subjected to Tension and Compression Loading[J].China Ocean Engineering,2023,37(4):588-597..

Tao D ,Ping C ,Fei W , et al.Strain field evolution and crack coalescence mechanism of composite strength rock-like specimens with sawtooth interface[J].Theoretical and Applied Fracture Mechanics,2023,126.

H. J H D V ,A. W S .The Effect of Specimen Thickness on the Lüders Phenomena in AISI 1524 Steel Alloy: Experimental Observations Using DIC[J].Experimental Mechanics, 2023, 63(5): 885-896.

J. Blaber,B. Adair,A. Antoniou. Ncorr: Open-Source 2D Digital Image Correlation Matlab Software[J]. Experimental Mechanics, 2015, 55(6).

Cheng Yuan-sheng. An approximate relation between compressive strength and tensile strength of some brittle materials—— a revision of the second strength theory [J]. Physical and chemical test. Physics Branch, 1981, 17(06): 30-31.

Downloads

Published

12-03-2024

Issue

Section

Articles

How to Cite

Zhao, Y., Shi, J., & Xu, X. (2024). Experimental Research on Impact Resistance Test of Polycrystalline Diamond Compact Based on Digital Image Correlation Method. Academic Journal of Science and Technology, 9(3), 232-240. https://doi.org/10.54097/951e4a53