Mechanical Analysis of Adding External Elevators by The Different Placement to The Existing Buildings

Mo Shi; Xiaoxian Huang; Yeol Choi

doi:10.54097/a3rzqg39

Authors

Mo Shi
Xiaoxian Huang
Yeol Choi

DOI:

https://doi.org/10.54097/a3rzqg39

Keywords:

External Elevator, Existing Building, RC structure, RSA (Response Spectrum Analysis).

Abstract

Elevators are vital for accessibility in buildings, where they serve as lifelines for individuals with disabilities and contribute to the overall enhancement of modern living standards. Despite their significance, the absence of elevator infrastructure in older buildings presents formidable challenges, limiting accessibility and hindering the full utilization of these structures. Furthermore, in today's environmentally conscious society, green retrofitting initiatives are paramount for reducing energy consumption and emissions, particularly in the realm of residential buildings. Retrofitting existing structures with elevators has become increasingly imperative, given the continued use of numerous buildings over the past decades. As a response to these challenges, external elevator integration has emerged as a critical research area, addressing both accessibility issues and the imperative for green retrofitting in existing buildings. External elevator integration is a critical research area addressing accessibility and green retrofitting, and seismic design measures are necessary to mitigate earthquake risks. This research specifically focuses on assessing the seismic effects of the external elevator into the specific existing RC structure at Kyungpook National University using RSA (Response Spectrum Analysis). The findings of this research are anticipated to serve as a valuable reference for external elevator design in existing buildings and provide assistance in the reconstruction and retrofitting of aging structures, ultimately contributing to the safety and resilience of urban infrastructure.

Downloads

Download data is not yet available.

References

Yongtao Tan, Guo Liua, Yan Zhang, Chenyang Shuai, and Geoffrey Qiping Shen, “Green retrofit of aged residential buildings in Hong Kong: A preliminary study,” Building and Environment, vol. 143, pp. 89–98, Jul. 2018.

Sui Pheng Low, Shang Gao, and Wen Lin Tay, “Comparative study of project management and critical success factors of greening new and existing buildings in Singapore,” Structural Survey, vol. 32, pp. 413–433, 2014.

Haowen You, Chenxu Si, Xinwen Ma, and Jingmiao Shang, “Overall and Local Wind Loads on Post-Installed Elevator Shaft of Existing Buildings,” Buildings, vol. 14, 110, Dec. 2023.

Tingting Huang, “The Difficulties and Countermeasures of Installing Elevators in Existing Residential Buildings,” Advances in Social Science, Education and Humanities Research, vol. 310, pp. 1981–1985, 2019.

Xinjun Dai, Zeling Li, Lindong Ma, and Jing Jin, “The Spatio-Temporal Pattern and Spatial Effect of Installation of Lifts in Old Residential Buildings: Evidence from Hangzhou in China,” Land, vol. 11, 1600, Sep. 2022.

Yasuhide Okuyama, “Disaster and economic structural change: case study on the 1995 kobe earthquake,” Economic Systems Research, vol. 26, pp. 98–117, Jan. 2014.

Tysh Shang Jan, Ming Wei Liu, and Ying Chieh Kao, “An upper-bound pushover analysis procedure for estimating the seismic demands of high-rise buildings,” Engineering Structures, vol. 26, pp. 117–128, Sep. 2003.

Sergio Ruggieri, and Giuseppina Uva, “Accounting for the Spatial Variability of Seismic Motion in the Pushover Analysis of Regular and Irregular RC Buildings in the New Italian Building Code,” Buildings, vol. 10, 117, Oct. 2020.

Rildova, and M.P. Singh, “Acceleration feedback-based active and semi-active seismic response control of rail-counterweight systems of elevators,” Shock and Vibration, vol. 12, pp. 435–448, Jun. 2005.

Diyan Zhang, “Seismic Performance Assessment and Enhancement Strategies for Civil Engineering Structures,” Academic Journal of Science and Technology, vol. 10, pp. 155–158, Mar. 2024.

M. Pozzi, and A. Der Kiureghian, “Response Spectrum analysis for floor acceleration,” Earthquake Engineering Structural Dynamics, vol. 44, pp. 2111–2127, Apr. 2015.

A. E. Hassaballa, Fathelrahman M. Adam., and M. A. Ismaeil, “Seismic Analysis of a Reinforced Concrete Building by Response Spectrum Method,” IOSR Journal of Engineering, vol. 3, pp. 1–9, Sep. 2013.

Luisa Berto, Marco Bovo, Irene Rocca, Anna Saetta, and Marco Savoia, “Seismic safety of valuable non-structural elements in RC buildings Floor Response Spectrum approaches,” Engineering Structures, vol. 205, 110081, Dec. 2019.

Mitesh Surana, Yogendra Singh, and Dominik H. Lang, “Effect of structural characteristics on damping modification factors for floor response spectra in RC buildings, Engineering Structures,” Engineering Structures, vol. 242, 112514, May. 2021.

T. Nagender, Y. M. Parulekar, Priti Shinde, J. Chattopadhyay, and P. Selvam, “Degradation assessment of corroded RC frames using in‑structure response spectra from shake table tests and numerical simulation,” Bulletin of Earthquake Engineering, vol. 21, pp. 5683–5715, Aug. 2013.

Ahmed Yousef Alghuff, Samir Mohammed Shihada and Bassam A. Tayeh, “Comparative Study of Static and Response Spectrum Methods for Seismic Analysis of Regular RC Buildings,” Journal of Applied Sciences, vol. 19, pp. 495–503, May. 2019.

Charis J. Gantes, and Nikos G. Pnevmatikos, “Elastic–plastic response spectra for exponential blast loading,” International Journal of Impact Engineering vol. 30, pp. 495–503, Jun. 2003.

Maciej Niedostatkiewicz, Tomasz Majewski, and Patryk Ziółkowski, “Design errors of the external lift shaft and their negative impact on the operation of the clinic building,” MATEC Web of Conferences, vol. 284, 02006, 2019.

Rikard Sundling, “A development process for extending buildings vertically – based on a case study of four extended buildings,” Construction Innovation, vol. 19, pp. 367–385, Mar. 2019.