Research on Erosion Mechanism and Protection Technology of Sand Bearing Fluid Pipeline
DOI:
https://doi.org/10.54097/2sv22d78Keywords:
Sand Bearing Fluid; Pipeline Erosion; Velocity of Flow; Coating Protection.Abstract
The purpose of this study is to explore the influencing factors of sand bearing fluid on pipeline erosion and evaluate the effects of different protection technologies. Through the construction of erosion testing equipment, the influence of sand particle size, concentration and flow rate on the erosion rate was systematically studied. The results show that the increase of sand particle size and concentration and the increase of flow rate will significantly increase the erosion rate. In addition, coating protection technology and alloying technology have been proved to be effective in reducing the erosion rate, and coating protection technology shows better protection effect. It provides theoretical basis and data support for pipeline design and protection in sand bearing fluid environment.
Downloads
References
Peng Wenshan, Xing Shaohua, Cao Xuewen, et al. Erosion mechanism analysis of dispersed bubble flow containing sand in horizontal bend pipe [J]. Surface Technology, 2019,48 (04): 237-244. (in Chinese)
ZHAO Yanlin, LIU Hao, Ji Zhongli, et al. Experimental study on long-term erosion of 316 stainless steel in a sand-containing two-phase jet [J]. Journal of Engineering Thermophysics, 2018, 39(02):361-365.
Liu Chuangang, Wang Xiao, Ju Shaodong, et al. Erosion Test analysis of 35CrMo steels with different hardness in sand bearing Fluid [J]. Materials Development and Application, 2023, 38(02):27-31. (in Chinese)
Yan Wei, Li Fuli, Wang Houdong, et al. Study on microscopic damage mechanism of clogging and erosion damage of metal wire braided filter for sand control pipe [J]. China Offshore Oil and Gas,2023,35(01):115-122.
LIU Hongda, Chen Yiming, Du Shengnan, et al. Comparative analysis of erosion law of temperature and velocity coupled flow pattern in sand bearing hot oil pipeline [J]. Material Protection,2023,56(10):139-146.
Yan Wei, Li Fuli, Wang Houdong, et al. Study on microscopic damage mechanism of clogging and erosion damage of metal wire braided filter for sand control pipe [J]. China Offshore Oil and Gas,2023,35(01):115-122.
Qian Dongliang, Tian Huifang. Erosion simulation and structural improvement of sand-bearing natural gas throttle valve [J]. Gas & Heat,2020,40(04):24-31+45-46.
Lv Ningbo, Zhai Xiaopeng, Zhang Chunyang, et al. Erosion law of sand control pipe under different erosion velocity and Angle [J]. Chemical Engineering Design Communication, 2019,45 (03):129-130. (in Chinese)
TANG Lishuang. Research on gas-liquid-solid multiphase flow and erosion in submarine relief pipe [D]. Southwest Petroleum University,2018.
Ji C L, Yang Z C, Ma S F, et al. Research on erosion wear characteristics of bending pipe of sand-bearing natural gas pipeline [J]. Pipeline Technology and Equipment, 2023, (04): 18-21+37.
Lv Chao, Chen Xuxin, Liu Yanlong, et al. Simulation analysis and prevention and control Measures of Natural Gas Transportation pipeline elbow erosion based on Fluent [J]. Welded pipe, 2023 46-48 (01): 13 to 18, DOI: 10.19291 / j.carol carroll nki. 1001-3938.2023.01.003.
Niu Luna, Han Lei, Song Xiaoliang, et al. Research on erosion damage prediction method of oil slurry pipeline in catalytic cracking [J]. Petroleum Refining and Chemical Industry, 2023, 54 (06):126-132.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Academic Journal of Science and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
