Optimization and Analysis of Gear Set Structure for Continuous Loading and Unloading Hydraulic Power Tongs
DOI:
https://doi.org/10.54097/s0ytj972Keywords:
Hydraulic power plier, SAPSO, gear, optimized, strength calibration.Abstract
Optimizes and analyzes the gear set structure of hydraulic power pliers used in continuous loading and unloading operations. The optimization design process of gear set structure was elaborated in detail, including the selection of independent variables, determination of constraint conditions, and establishment of optimization objectives and fitness functions. The simulated annealing particle swarm optimization algorithm (SAPSO) was used for optimization design, and the optimization results showed that the total volume of the gear set was reduced by 17.1%. Finally, the strength of the optimized gear set was verified through finite element analysis, and the results showed that the strength of the optimized gear set met the actual working requirements.
Downloads
References
[1] Artoni A. A methodology for simulation-based, multiobjective gear design optimization[J]. Mechanism and Machine Theory, 2019, 133: 95-111.
[2] Tavčar J, Černe B, Duhovnik J, et al. A multicriteria function for polymer gear design optimization[J]. Journal of Computational Design and Engineering, 2021, 8(2): 581-599.
[3] Qin Z, Wu Y T, Lyu S K. A review of recent advances in design optimization of gearbox[J]. International Journal of Precision Engineering and Manufacturing, 2018, 19: 1753-1762.
[4] Atila Ü, Dörterler M, Durgut R, et al. A comprehensive investigation into the performance of optimization methods in spur gear design[J]. Engineering Optimization, 2020, 52(6): 1052-1067.
[5] Lv Y, Lei L, Sun L, et al. Improvement of the wear resistance of 20CrMnTi steel gear by discrete laser surface melting[J]. Optics & Laser Technology, 2023, 165: 109598.
[6] Peruń G, Łazarz B. Modelling of power transmission systems for design optimization and diagnostics of gear in operational conditions[J]. Solid State Phenomena, 2014, 210: 108-114.
[7] Habermehl C, Jacobs G, Neumann S. A modeling method for gear transmission efficiency in transient operating conditions[J]. Mechanism and Machine Theory, 2020, 153: 103996.
[8] Liu Yongping, Ren Zhongtao, Wei Yongqiao, et al. Research on the Error of Involute Variable Tooth Thickness Straight Gear Transmission. Machine Tool and Hydraulics, 2023, 51(04): 1-6.
[9] Pei Junfeng, Song Yupeng, Liu Zhigang, et al. Simulation Analysis of the Gear Transmission System of a Tubing Tong. Journal of Changzhou University (Natural Science Edition), 2018, 30(02): 63-68.
[10] Fang Kai, Wang Huiliang, Su Jianxin. Geometric Backlash Analysis and Experimental Research of RV Reducer. Mechanical Design and Manufacturing, 2024-09-13, 1-6.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Academic Journal of Science and Technology

This work is licensed under a Creative Commons Attribution 4.0 International License.