Research on the Surface Deformation Law with the Mining Process of Tangjiazhuang Iron Mine Based on FLAC3D

Chi Zhang; Yin Chen; Ping Liu; Hu Ji; Jinyang Li

doi:10.54097/c7kfjv32

Authors

Chi Zhang
Yin Chen
Ping Liu
Hu Ji
Jinyang Li

DOI:

https://doi.org/10.54097/c7kfjv32

Keywords:

Underground mine, Stoping process, Surface deformation, The numerical simulation.

Abstract

In view of the current situation that the mining process of underground mines is easy to induce surface deformation, which leads to cracking and deformation of surface structures, this paper uses finite difference numerical analysis software FLAC3D to establish a fine engineering geomechanical model of Tangjiazhuang Iron Mine. Combined with the overall plan of ore recovery in each middle section of the mine, the production status of the current stage of the mine is simulated and the rationality of the three-dimensional numerical calculation model is verified by the deformation characteristics of typical surface structures in the mining area. on this basis, the paper simulates the general law of surface deformation under waste rock filling mining for the next mining planning scheme of +113m and +69m in the middle section of the mine. on the one hand, it explains the surface deformation characteristics induced by the mining process as a whole. on the other hand, it also further explains the actual situation that the surface deformation induced by sublevel stoping with subsequent waste rock filling will not have a great impact on the surface structures, which lays a foundation for orderly organizing production, reasonable arrangement of mining sequence and prevention of surface deformation in the later stage of the mine.

Downloads

Download data is not yet available.

References

[1] Wu Aixiang, Wang Yong, Zhang Minzhe, et al. New progress and prospect of Key Technologies in underground mining of Metal Mines [J]. Metal Mine,2021,535(1):1-13.

[2] Xu Mengguo, Tan Tao, Cheng Aiping, et al. Stability analysis of caving stope in lower filling body of Chengchao Iron Mine [J]. Metal Mine,2019,515(5):14-20.

[3] Yang Yu, YU Jieyu, Wang Yu. Numerical simulation analysis of overlying rock movement in strip mining gob [J]. Chinese Journal of Geological Hazards and Control,2017,28(1):96-101.

[4] Wang Shanguo, Zheng Huaichang, Liu Zhihe, et al. Prevention and control technology of goaf group collapse in gypsum mine based on boundary wall effect [J]. Mining Research and Development, 2021, 41(9): 29-32.

[5] Shi Feng, HUANG Fkai, Wang Ping, et al. Study on surface cracking and Roof caving in overlying goaf during mining of 30# orebody in Huangshan Copper-nickel Mine [J]. Nonferrous Metals Mining Section,2020,72(1):1-5.

[6] Hu Jingyun, Li Shulin, Lin Feng, et al. Research on monitoring of overburden rock pressure and surface collapse disaster in large goaf [J]. Rock and Soil Mechanics,2014,35(4):1117-1122.

[7] Wang Wei, HE Huansha, Liu Chang. Research on surface movement law of overlying orebody mining in filling station [J]. Mining Research and Development,2021,41(7):66-70.

[8] Cao Wenlong, WANG Xueyan, Cao Mingqi. Analysis on the impact of underground mining on the safety of surface structures and shaft [J]. Mining Research and Development,2019,39(4):17-22.

[9] Liu Huanchun, Yu Jianxin, Jiao Huazhe, et al. Study on the influence of complex gob filling mining on ground construction [J]. Metal Mine, 2019,526(4):39-45.

[10] Guo Yan-Hui, Hou Ke-Peng, Yang Zhi-Quan, et al. Influence of dip Angle on rock displacement of steep inclined orebody under tectonic stress [J]. Mining Research and Development,20,40(7):18-21.

[11] Wang Rui, Xue Yuling, Wan Shizhen, et al. Research on cumulative temporal deformation monitoring in mining area based on DInSAR technology [J]. Chemical Minerals and Processing,2021,(11):44-47.

[12] Peng Dingxiao, Li Xibing. Delineation of surface movement zone in Hongling lead-zinc Mine based on PSO-SVM combined numerical simulation [J]. Nonferrous Metals Engineering,2019,9(3):98-106.

[13] Wu Yabin, Zhang Zhibo. Study on the influence of mining and filling sequence of open stope subsequent filling method on surface deformation [J]. Mining Research and Development,20,40(7):12-17.

[14] Ye Wei, Xu Liangji. Analysis of Surface movement and deformation law of repeated mining [J]. Metal Mine,2020,530(8):188-194.