Research Status and Prospects of Voice Coil Motor Control Technology

Authors

  • Zhonghao Chen Department of Qingdao University of Science and Technology, Qingdao, China

DOI:

https://doi.org/10.54097/ntz50c02

Keywords:

Voice Coil Motor Control, Control Strategies, Engineering Application Scenarios.

Abstract

The voice coil motor (VCM) represents a unique type of direct-drive motor, named for its operational principle. Its working mechanism resembles that of a loudspeaker diaphragm, wherein a voice coil generates motion through the application of a controlled electric current. The fundamental principle involves a current-carrying conductor producing force within a magnetic field, with the magnitude of the force directly proportional to the input current. The resulting motion is typically linear or follows an arc trajectory. As a distinct variant of linear motors, the VCM features a coreless design and operates without a traditional transmission system. This structural simplification enhances system compactness and reduces mechanical complexity. Additionally, VCMs offer numerous advantages, including high stiffness, rapid response, silent operation, excellent linearity, and the absence of cogging and pulsation. These attributes make them well-suited for short-stroke, high-frequency, and highly precise reciprocating movements, contributing to their widespread use in high-precision servo applications. While the removal of transmission components improves efficiency and design simplicity, it also increases the system’s sensitivity to external disturbances and variations in load. Moreover, challenges such as low thrust density, mechanical resonance, and the difficulty of developing accurate system models hinder the performance of VCMs in precision control scenarios. This paper focuses on the analysis of several prominent control strategies for VCMs, detailing their operating principles and characteristics. It also summarizes their practical application domains, aiming to provide insight into the implementation of VCMs in advanced servo systems.

Downloads

Download data is not yet available.

References

[1] Hoffer B, Rana V, Menzel S, Waser R, Kvatinsky S. Experimental demonstration of Memristor-Aided Logic (MAGIC) using Valence Change Memory (VCM). IEEE Transactions on Electron Devices . 2020 Jun 25;67 (8):3115–22.

[2] Hsieh C-L, Liu C-S. Design of a voice coil motor actuator with L-Shape coils for optical zooming smartphone cameras. IEEE Access. 2020 Jan 1;8:20884–91.

[3] Kang J, An JS, Wang B. An efficient FEC encoder core for VCM LEO Satellite-Ground communications. IEEE Access. 2020 Jan 1;8:125692–701.

[4] Qiao Y, Zhao T, Gui X. Overview of position servo control technology and development of Voice Coil Motor. CES Transactions on Electrical Machines and Systems. 2022 Sep 1;6 (3):269–78.

[5] Smith KJ, Graham DJ, Neasham JA. Design and optimization of a voice coil motor with a rotary actuator for an ultrasound scanner. IEEE Transactions on Industrial Electronics. 2015 Jul 22;62 (11):7073–8.

[6] Xing F, Kwon B-I. Design of a Rotary-Linear motor with unipolar SPM and voice coil structure. IEEE Access. 2020 Jan 1;8:150291–300.

[7] Xing F, Kwon J-W, Li M, Kwon B-I. A Rotary-Linear SPM voice coil motor with PM flux bridges for output performance improvement. IEEE Access. 2021 Jan 1;9:57054–63.

[8] Chang Y-H, Liu C-S, Chen I-W, Tsai M-S, Tseng H-C. Open-Loop control of voice coil motor with magnetic restoring force using High-Low frequency composite signals. IEEE Access. 2019 Jan 1;7:146258–63.

[9] Hekimoglu B. Optimal tuning of Fractional Order PID controller for DC motor speed control via chaotic Atom Search Optimization algorithm. IEEE Access. 2019 Jan 1;7:38100–14.

[10] Padhy S, Panda S. Application of a simplified Grey Wolf optimization technique for adaptive fuzzy PID controller design for frequency regulation of a distributed power generation system. Protection and Control of Modern Power Systems. 2021 Feb 1;6 (1).

[11] Gao P, Zhang G, Ouyang H, Mei L. An adaptive super twisting nonlinear fractional Order PID sliding mode control of permanent magnet synchronous motor speed regulation system based on extended state observer. IEEE Access. 2020 Jan 1;8:53498–510.

[12] Wei Y-S, Wan K, Xu Q-Y. Design of adaptive ILC for 2-D FMM systems with unknown control directions. IEEE Access. 2019 Jan 1;7:134920–5.

[13] Zheng Y, Xu R, Fei C, Castelli VP, Meng Q, Yu H. A neural network feedforward PID control method for soft pneumatic actuator based on origami mechanism: achieving accurate position control. 2021 6th International Conference on Automation, Control and Robotics Engineering (CACRE). 2024 Jul 18;220–4.

[14] Zuo D, Qian L, Yang T, Cui X, Luo Q. Coupling leveling control based on fuzzy PID for synchronous loading system of Load‐Bearing Test Bed. Chinese Journal of Electronics. 2017 Nov 1;26 (6):1206–12.

[15] Yang J, Hou D, Sun X, Zuo J. Force equalization control of redundant electromechanical actuation system by FOPID and current feedforward. IEEE Access. 2023 Jan 1;11:109283–93.

[16] Wan J, He B, Wang D, Yan T, Shen Y. Fractional-Order PID motion control for AUV using Cloud-Model-Based Quantum genetic algorithm. IEEE Access. 2019 Jan 1;7:124828–43.

[17] Liu J, Li T, Zhang Z, Chen J. NARX Prediction-Based Parameters Online Tuning Method of Intelligent PID System. IEEE Access. 2020 Jan 1;8:130922–36.

[18] Liu F, Wang H, Shi Q, Wang H, Zhang M, Zhao H. Comparison of an ANFIS and Fuzzy PID control model for performance in a Two-Axis inertial stabilized platform. IEEE Access. 2017 Jan 1;5:12951–62.

[19] Gabdullin N, Ahmad H, Ro J. Next generation autofocus and optical image stabilization system for camera modules using magnetic shape memory actuators. IEEE Access. 2020 Jan 1;8:160177–87.

[20] Luo L, Zhang Y, Sun Z. Task space division and trajectory planning for a flexible macro-micro manipulator system. Tsinghua Science & Technology. 2007 Oct 1;12 (5):607–13.

Downloads

Published

13-11-2025

Issue

Section

Articles