Circuit Techniques for Overcoming Gain-Bandwidth Limitations in Amplifiers

Authors

  • Maiqi Liu Dalian University of Technology, Dalian, China
  • Yuying Ren Southwest Petroleum University, Chengdu, China

DOI:

https://doi.org/10.54097/1xdcgk45

Keywords:

Amplifier gain; cascode; cascade; gain boosting; current cancellation; bootstrapping.

Abstract

This paper provides a comprehensive review of five core amplifier architecture: Cascode, Cascade, Gain Boosting, Current Cancellation, and Bootstrapping, which aims at breaking through the limitation of Gain-Bandwidth Product in modern electronical systems. Facing the demands of 5G/6G mobile communication, radar detection and medical imaging, this study systematically analyzes the principle, structure and performance of multiple techniques, clarifying its improvement effect on aspects such as gain, bandwidth, output impedance and stability. A comparative assessment of these architectures reveals their respective advantages in different application scenarios and process conditions. Furthermore, the paper also indicates that combining these circuits with FinFET and three-dimensional heterogeneous integration, will emphasize their combined potential to significantly boost linearity, noise performance, and power efficiency. The study also addresses ongoing challenges and future directions in implementing these techniques in mass production environments. These advancements offer critical support significant potential for next-generation high-frequency and high-precision amplifier designs, paving the way for more efficient and reliable electronic systems in emerging technological domains.

Downloads

Download data is not yet available.

References

[1] P. J. Hurst, S. H. Lewis, J. P. Keane, F. Aram and K. C. Dyer, "Miller compensation using current buffers in fully differential CMOS two-stage operational amplifiers," in IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 51, no. 2, pp. 275-285, Feb. 2004, doi: 10.1109/TCSI.2003.820254.

[2] S. Sakurai and M. Ismail, "Robust design of rail-to-rail CMOS operational amplifiers for a low power supply voltage," in IEEE Journal of Solid-State Circuits, vol. 31, no. 2, pp. 146-156, Feb. 1996, doi: 10.1109/4.487991. DOI: https://doi.org/10.1109/4.487991

[3] C. Yadav and S. Prasad, "Low voltage low power sub-threshold operational amplifier in 180nm CMOS," 2017 Third International Conference on Sensing, Signal Processing and Security (ICSSS), Chennai, India, 2017, pp. 35-38, doi: 10.1109/SSPS.2017.8071560. DOI: https://doi.org/10.1109/SSPS.2017.8071560

[4] Guang, Yang & Bin, Yu. (2012). Design and Analysis of a High-Gain Rail-To-Rail Operational Amplifier. Procedia Engineering. 29. 3039-3043. 10.1016/j.proeng.2012.01.436. DOI: https://doi.org/10.1016/j.proeng.2012.01.436

[5] C. Stancu, D. Dobrescu and L. Dobrescu, "Offset Voltage Reduction Methods for a Two-Stage Folded Cascode Operational Amplifier," 2022 14th International Conference on Electronics, Computers and Artificial Intelligence (ECAI), Ploiesti, Romania, 2022, pp. 1-4, doi: 10.1109/ECAI54874.2022.9847308. DOI: https://doi.org/10.1109/ECAI54874.2022.9847308

[6] A. Sharma, T. Sharma and B. Kaur, "Rail-to-rail two stage CMOS operational amplifier: A comparative analysis," 2018 2nd International Conference on Inventive Systems and Control (ICISC), Coimbatore, India, 2018, pp. 152-160, doi: 10.1109/ICISC.2018.8399056. DOI: https://doi.org/10.1109/ICISC.2018.8399056

[7] A. J. Kumar, K. L. Krishna, K. A. Viswateja, K. Gopi, S. M. Rao and B. Mamatha, "A High Gain Low Power Operational Amplifier using Class AB Output Stage," 2019 3rd International Conference on Computing Methodologies and Communication (ICCMC), Erode, India, 2019, pp. 409-413, doi: 10.1109/ICCMC.2019.8819814. DOI: https://doi.org/10.1109/ICCMC.2019.8819814

[8] A. Yen and B. J. Blalock, "A High Slew Rate, Low Power, Compact Operational Amplifier Based on the Super-Class AB Recycling Folded Cascode," 2020 IEEE 63rd International Midwest Symposium on Circuits and Systems (MWSCAS), Springfield, MA, USA, 2020, pp. 9-12, doi: 10.1109/MWSCAS48704.2020.9184559. DOI: https://doi.org/10.1109/MWSCAS48704.2020.9184559

[9] M. Kadam, "Dual Stage CMOS Operational Amplifier Design in Sky-Water 130nm Technology," 2021 International Conference on Advances in Computing, Communication, and Control (ICAC3), Mumbai, India, 2021, pp. 1-5, doi: 10.1109/ICAC353642.2021.9697325. DOI: https://doi.org/10.1109/ICAC353642.2021.9697325

[10] S. Nitundil, N. Singh, R. Balaji and P. Arora, "Design and Comparative analysis of a Two-Stage Ultra-Low-Power Subthreshold Operational Amplifier in 180nm, 90nm, and 45nm technology," 2021 Devices for Integrated Circuit (DevIC), Kalyani, India, 2021, pp. 36-40, doi: 10.1109/DevIC50843.2021.9455791. DOI: https://doi.org/10.1109/DevIC50843.2021.9455791

[11] S. I. Singh, "Design of low-voltage CMOS two-stage operational transconductance amplifier," 2017 International Conference on Electrical, Electronics, Communication, Computer, and Optimization Techniques (ICEECCOT), Mysuru, India, 2017, pp. 248-252, doi: 10.1109/ICEECCOT.2017.8284677. DOI: https://doi.org/10.1109/ICEECCOT.2017.8284677

[12] V. Raghuveer, K. Balasubramanian and S. Sudhakar, "A 2μV low offset, 130 dB high gain continuous auto zero operational amplifier," 2017 International Conference on Communication and Signal Processing (ICCSP), Chennai, India, 2017, pp. 1715-1718, doi: 10.1109/ICCSP.2017.8286685. DOI: https://doi.org/10.1109/ICCSP.2017.8286685

[13] E. Kargaran, H. Khosrowjerdi and K. Ghaffarzadegan, "A 1.5 v High Swing Ultra-Low-Power Two Stage CMOS OP-AMP in 0.18 µm Technology," 2010 2nd International Conference on Mechanical and Electronics Engineering, Kyoto, Japan, 2010, pp. V1-68-V1-71, doi: 10.1109/ICMEE.2010.5558594. DOI: https://doi.org/10.1109/ICMEE.2010.5558594

[14] J. M. Carrillo, G. Torelli, R. Perez-Aloe Valverde and J. F. Duque-Carrillo, "1-V Rail-to-Rail CMOS OpAmp With Improved Bulk-Driven Input Stage," in IEEE Journal of Solid-State Circuits, vol. 42, no. 3, pp. 508-517, March 2007, doi: 10.1109/JSSC.2006.891717. DOI: https://doi.org/10.1109/JSSC.2006.891717

[15] Z. Qin, A. Tanaka, N. Takaya and H. Yoshizawa, "0.5-V 70-nW Rail-to-Rail Operational Amplifier Using a Cross-Coupled Output Stage," in IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 63, no. 11, pp. 1009-1013, Nov. 2016, doi: 10.1109/TCSII.2016.2539081. DOI: https://doi.org/10.1109/TCSII.2016.2539081

[16] P. J. Hurst, S. H. Lewis, J. P. Keane, F. Aram and K. C. Dyer, "Miller compensation using current buffers in fully differential CMOS two-stage operational amplifiers," in IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 51, no. 2, pp. 275-285, Feb. 2004, doi: 10.1109/TCSI.2003.820254. DOI: https://doi.org/10.1109/TCSI.2003.820254

[17] G. Palmisano and G. Palumbo, "A compensation strategy for two-stage CMOS opamps based on current buffer," in IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, vol. 44, no. 3, pp. 257-262, March 1997, doi: 10.1109/81.557376. DOI: https://doi.org/10.1109/81.557376

[18] Minsheng Wang, T. L. Mayhugh, S. H. K. Embabi and E. Sanchez-Sinencio, "Constant-g/sub m/ rail-to-rail CMOS op-amp input stage with overlapped transition regions," in IEEE Journal of Solid-State Circuits, vol. 34, no. 2, pp. 148-156, Feb. 1999, doi: 10.1109/4.743758. DOI: https://doi.org/10.1109/4.743758

[19] A. N. Bhatkar, M. B. Mali and P. P. Deshmukh, "A 90nm low power OTA using adaptive bias," 2015 International Conference on Pervasive Computing (ICPC), Pune, India, 2015, pp. 1-5, doi: 10.1109/PERVASIVE.2015.7086981. DOI: https://doi.org/10.1109/PERVASIVE.2015.7086981

[20] D. Panchal and A. Naik, "0.5 V Variable Gain Amplifier Using Dynamic Threshold MOS for Ultra-Low Power Applications," 2022 IEEE Delhi Section Conference (DELCON), New Delhi, India, 2022, pp. 1-5, doi: 10.1109/DELCON54057.2022.9752924.

[21] F. Esparza-Alfaro, S. Pennisi, G. Palumbo and A. J. Lopez-Martin, "Low-Power Class-AB CMOS Voltage Feedback Current Operational Amplifier With Tunable Gain and Bandwidth," in IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 61, no. 8, pp. 574-578, Aug. 2014, doi: 10.1109/TCSII.2014.2327390. DOI: https://doi.org/10.1109/TCSII.2014.2327390

[22] N. V. Butyrlagin, N. N. Prokopenko, E. M. Savchenko and A. S. Budyakov, "Design Features of High-Speed CMOS Differential Difference Operational Amplifiers at Low Static Current Consumption," 2018 26th Telecommunications Forum (TELFOR), Belgrade, Serbia, 2018, pp. 1-4, doi: 10.1109/TELFOR.2018.8611965. DOI: https://doi.org/10.1109/TELFOR.2018.8611965

[23] C. Stanescu et al., "A Dual Low Voltage Chopper Offset-Stabilized Operational Amplifier," 2021 International Semiconductor Conference (CAS), Romania, 2021, pp. 129-132, doi: 10.1109/CAS52836.2021.9604191. DOI: https://doi.org/10.1109/CAS52836.2021.9604191

[24] T. Mai, K. Schmid, J. Röber, A. Hagelauer and R. Weigel, "A fully-differential operational amplifier using a new chopping technique and low-voltage input devices," 2017 24th IEEE International Conference on Electronics, Circuits and Systems (ICECS), Batumi, Georgia, 2017, pp. 74-77, doi: 10.1109/ICECS.2017.8292081. DOI: https://doi.org/10.1109/ICECS.2017.8292081

[25] M. A. Dehkordi, S. M. Mirsanei and S. Zohoori, "A CMOS Low-Noise and Low-Power Transimpedance Amplifier," 2021 29th Iranian Conference on Electrical Engineering (ICEE), Tehran, Iran, Islamic Republic of, 2021, pp. 107-111, doi: 10.1109/ICEE52715.2021.9544118. DOI: https://doi.org/10.1109/ICEE52715.2021.9544118

[26] D. Panchal and A. Naik, "0.5 V Variable Gain Amplifier Using Dynamic Threshold MOS for Ultra-Low Power Applications," 2022 IEEE Delhi Section Conference (DELCON), New Delhi, India, 2022, pp. 1-5, doi: 10.1109/DELCON54057.2022.9752924. DOI: https://doi.org/10.1109/DELCON54057.2022.9752924

Downloads

Published

13-11-2025

Issue

Section

Articles