Simulation of VERICUT-based Generating Grinding of Involute Beveloid Gears

Yikun Zhang; Yongping Liu

doi:10.54097/ajst.v5i2.6285

Authors

Yikun Zhang
Yongping Liu

DOI:

https://doi.org/10.54097/ajst.v5i2.6285

Keywords:

Involute beveloid gears, VERICUT, Developing grinding, Machining simulation.

Abstract

Based on the principle of generating grinding, VERICUT is used for generating grinding of involute beveloid gears. Firstly, the tooth surface equation of the involute beveloid gears is derived according to the principle of involute beveloid gears forming and gear meshing theory, and the theoretical model of the involute beveloid gear is established; secondly, the CNC conical gear grinding machine model, grinding wheel tool model and tooth blank are built in UG and imported into VERICUT, and the CNC machining program of the generating grinding is written to carry out the generating grinding simulation; finally, the simulated involute beveloid gear is automatically compared with the design model to verify the accuracy of the generating grinding simulation machining method. This study provides theoretical guidance for the practical machining of involute beveloid gears, reduces costs and shortens machining cycles, thus improving the productivity of involute beveloid gears.

Downloads

Download data is not yet available.

References

Pu Lianggui. Mechanical design (7th edition) [M]. Higher Education Press, 1960.

Sapunjang. Design of high speed gear transmission [M]. Machinery Industry Press, 1986.

Senba Masasho. Gear Shifting [M]. Shanghai Science and Technology Press, 1984.

Shen Yichun. Computer-aided design and dynamic simulation of intersecting shaft thickened gears [D]. Harbin Institute of Technology, 2002.

Liu Y. Study of intersecting shaft thickened gears with line contact [D]. Harbin Institute of Technology.

Wen Jianmin. Research on non-involute spatially thickened gear transmission [D]. Harbin Institute of Technology, 2004.

Zhao H, Wu QL, Huang K, Qiu MM, Liu P. Current status and problems of domestic gear research[J]. Journal of Mechanical Engineering,2013,49(19):11-20.

Liu YP, Wu XT, Li HQ. Study on grinding of involute beveloid gears with Conical Wheel Gear Grinding Machine [J]. Journal of Agricultural Machinery, 2006(06): 117-120.

Zhang J, Wang L, Ma LX. Research status of CNC machining simulation system[J]. Machine Tool Electrical,2006(04):5-7.

Huang Jinli. Research on the machining method of spatially thickened gears [D]. Harbin: Harbin Institute of Technology, 2014.