Statics Analysis and Modal Analysis of Copper Anode Plate Taking Robot

Meng Zhang

doi:10.54097/ije.v3i1.10139

Authors

Meng Zhang

DOI:

https://doi.org/10.54097/ije.v3i1.10139

Keywords:

Copper Anode Plate, Robot, Static Analysis, Modal Analysis

Abstract

Taking the copper anode plate picking robot as the research object, the three-dimensional model of the robot was established by solidworks software, and combined with the actual working characteristics of the robot, the workbench software was used to analyze the static mechanics of the robot arm in the most dangerous working condition and the first six orders of modal analysis in three typical working conditions: picking position, putting position and starting position. The simulation results show that the strength and stiffness of the robot arm and the small arm are within the allowable range and meet the design requirements; it is necessary to avoid the low-order frequencies or to strengthen the rigidity of the overall structure of the robot.

Downloads

Download data is not yet available.

References

Liu Z,Zhuang H,Gao H, et al.Static Force Analysis of Foot of Electrically Driven Heavy-Duty Six-Legged Robot under Tripod Gait[J].Chinese Journal of Mechanical Engineering, 2018, 31(04):58-72.

Gao G,Zheng Y,Wang H. Kinematic and Static Analysis and Experimental Study for Dual-arm Continuum Robot[C]// Xidian University,Hong Kong Society of Mechanical Engineers. Proceedings of 2019 3rd International Conference on Artificial Intelligence, Automation and Control Technologies (AIACT 2019).IOP Publishing,2019:828-833.

Zhang L,Yang F,Li D, et al. Analysis of Low Energy Static Posture for Hexapod Bionic Robot[C]//Science and Engineering Research Center.Proceedings of 2017 2nd International Conference on Electrical, Automation and Mechanical Engineering (EAME2017).Atlantis Press, 2017: 327-330.

Luo M J,Sun W X,Lin Z Q, et al. Research on the Static Mechanics of the Hybrid Robot[J]. Applied Mechanics and Materials, 2014, 3365(602-605).

Xiaolong Y,Chaogang Z,Le Z. Static analysis and optimization design of a special-shaped rod of the crab-like robot based on ANSYS Workbench[J]. Journal of Physics: Conference Series, 2023, 2459(1)..