Sensor Technology for Improving the Safety and Performance of Electric Vehicle Battery Management Systems

Haonan Yu

doi:10.54097/hw58sc17

Authors

Haonan Yu

DOI:

https://doi.org/10.54097/hw58sc17

Keywords:

Battery Management System, Electric Vehicle, Sensor Technology

Abstract

With the rapid development of electric vehicles, the safety and performance of battery management system (BMS) has already become a worldwide problem. The performance, life and safety of a car battery have a direct impact on the overall reliability and user experience of the car. This paper discusses the application of advanced sensor technology to improve the safety and performance of electric vehicle BMS. The influence of different kinds of sensors, such as temperature, voltage, current and gas sensors, on real-time monitoring, failure detection and battery performance optimization were discussed. It also explores the potential of sensor integration, predictive maintenance and smart charging management for accurate estimation of state of charge (SOC) and state of health (SOH). The study indentified important challenges regarding the regarding the precision, cost and environmental adaptability of sensors and suggested the future direction that can meet the needs of the nesxt generation BMS systems. This study provides insights that could enhance the safety and efficiency of BMS through sensor technologies critical to the performance and safety of future electric vehicles.

Downloads

Download data is not yet available.

References

[1] International Energy Agency. (2023) Global EV Outlook 2023. https://www.iea.org/reports/global-ev-outlook-2023.

[2] Yang, F., Wang, D., Xu, F., et al. (2020) Lifespan prediction of lithium-ion batteries based on various extracted features and gradient boosting regression tree model. Journal of Power Sources, 476: 228654.

[3] Bahrami, M., Martin, J., Maranzana, G., et al. (2022) Fuel cell management system: An approach to increase its durability. Applied Energy, 306: 118070.

[4] Hannan, M.A., Lipu, M.S.H., Hussain, A., et al. (2017) A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: Challenges and recommendations. Renewable and Sustainable Energy Reviews, 78: 834-854.

[5] Yang, Z., Wang, F., Nie, W., et al. (2023) Surface acoustic wave temperature sensor based on Pt/AlN/4H-SiC structure for high-temperature environments. Sensors and Actuators A: Physical, 357: 114379.

[6] Kibrete, F., Woldemichael, D.E., Gebremedhen, H.S. (2024) Multi-Sensor data fusion in intelligent fault diagnosis of rotating machines: A comprehensive review. Measurement, 232: 114658.

[7] Zhu, S., Han, J., An, H., et al. (2020) A novel embedded method for in-situ measuring internal multi-point temperatures of lithium ion batteries. Journal of Power Sources, 456: 227981.

[8] Lin, Q., Wang, J., Xiong, R., et al. (2019) Towards a smarter battery management system: A critical review on optimal charging methods of lithium ion batteries. Energy, 183: 220-234.

[9] He, D., Fong, C.H.J., Cui, H., et al. (2024) Theoretical designing of Ni-doped PtSTe monolayer as a promising gas sensor upon thermal runaway gases in the Li-ion battery. Physics Letters A, 525: 129933.

[10] Wang, Z., Zhao, X., Fu, L., et al. (2023) A review on rapid state of health estimation of lithium-ion batteries in electric vehicles. Sustainable Energy Technologies and Assessments, 60: 103457.

[11] Nishi, Y. (2001) Lithium ion secondary batteries; past 10 years and the future. Journal of Power Sources, 100: 101-106.

[12] Feng, X., Ouyang, M., Liu, X., et al. (2018) Thermal runaway mechanism of lithium ion battery for electric vehicles: A review. Energy Storage Materials, 10: 246-267.

[13] Yan, Y., Luo, W., Wang, Z., et al. (2024) Fault diagnosis of lithium-ion battery sensors based on multi-method fusion. Journal of Energy Storage, 85: 110969.

[14] National Highway Traffic Safety Administration (NHTSA). (2022) Electric Vehicle Battery Safety Technical Report, DOT HS 813 298. https://www.nhtsa.gov

[15] Ma, H., He, Q., Zhang, F., et al. (2025) Research progress on early warning method and suppression technology of thermal runaway of lithium battery. Journal of Energy Storage, 119: 116377.

[16] Plett, G.L. (2015) Battery Management Systems, Volume I: Battery Modeling. Artech House, Boston.

[17] Wan, E.A., van der Merwe, R. (2000) The unscented Kalman filter for nonlinear estimation. In: Proceedings of the IEEE Symposium on Adaptive Systems for Signal Processing, Communications, and Control. Lake Louise, AB, Canada. 153-158.

[18] Zhao, H., Li, Q., Hu, J. (2025) State of charge estimation of lithium-ion batteries based on extended-KalmanNet. Journal of Energy Storage, 124: 116.

[19] Hochreiter, S., Schmidhuber, J. (1997) Long short-term memory. Neural Computation, 9: 1735-1780.

[20] Jarraya, I., BenAtitallah, S., Alahmed, F., et al. (2025) SOH-KLSTM: A hybrid Kolmogorov-Arnold Network and LSTM model for enhanced Lithium-ion battery Health Monitoring. Journal of Energy Storage, 122: 116541.