Decomposition Mechanism of Organic Sulfide in Heavy Oil during Thermal Reaction

Authors

  • Lijun Zhu State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao, Shandong, China
  • Yan Bai State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao, Shandong, China
  • Dongfang Jia State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao, Shandong, China
  • Zengli Zhai State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao, Shandong, China
  • Long Zhang State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao, Shandong, China

DOI:

https://doi.org/10.54097/d1jsbv17

Keywords:

Thiophene, Benzothiophene, Thermal Reaction, Sulfur Compound Transformation, Free-radical Mechanism

Abstract

As the proportion of high-sulfur crude oil continues to rise, the transformation behavior of sulfur compounds during delayed coking is of considerable significance for clean fuel production and for controlling the sulfur content of petroleum coke. In this work, model crude oil systems were constructed using liquid paraffin as the saturate fraction and p-xylene as the aromatic fraction, with thiophene and benzothiophene added separately. Thermal reaction experiments were conducted at 500 °C for 3 h. Gas chromatography with sulfur chemiluminescence detection (GC-SCD) was used for qualitative and quantitative analysis of the sulfur composition in gas- and liquid-phase products, and the transformation pathways of sulfur compounds were inferred in conjunction with free-radical reaction mechanisms. The results show that H₂S predominates in the gas-phase sulfur in both systems, and that the liquid phase contains, in addition to unreacted sulfur compounds, a substantial variety of newly formed sulfur compounds. These findings demonstrate that the thermal reactions in both systems follow a free-radical mechanism centered on C–S bond activation. Furthermore, benzothiophene is converted from a readily desulfurized small molecule into sulfur compounds that are more prone to condensation and coke formation. The results provide a molecular-level basis for regulating the transformation of thiophene-type sulfur compounds and for low-sulfur clean processing in heavy oil thermal reactions.

Downloads

Download data is not yet available.

References

[1] Song, C. (2003). An overview of new approaches to deep desulfurization for ultra-clean gasoline, diesel fuel and jet fuel. Catalysis Today, 86(1), 211–263. https://doi.org/10.1016/S0920-5861(03)00405-1. DOI: https://doi.org/10.1016/S0920-5861(03)00412-7

[2] Wei, J., Guo, Q., Ding, L., et al. (2017). Synergy mechanism analysis of petroleum coke and municipal solid waste (MSW)-derived hydrochar co-gasification. Applied Energy, 206, 1354–1363. https://doi.org/10.1016/j.apenergy.2017.09.099. DOI: https://doi.org/10.1016/j.apenergy.2017.10.005

[3] Zhong, Q., Mao, Q., Xiao, J., et al. (2018). ReaxFF simulations of petroleum coke sulfur removal mechanisms during pyrolysis and combustion. Combustion and Flame, 198, 146–157. https://doi.org/10.1016/j.combustflame.2018.09.013. DOI: https://doi.org/10.1016/j.combustflame.2018.09.005

[4] Zhong, Q., Mao, Q., Zhang, L., et al. (2018). Structural features of Qingdao petroleum coke from HRTEM lattice fringes: Distributions of length, orientation, stacking, curvature, and a large-scale image-guided 3D atomistic representation. Carbon, 129, 790–802. https://doi.org/10.1016/j.carbon.2018.01.034. DOI: https://doi.org/10.1016/j.carbon.2017.12.106

[5] Shan, Y., Guan, D., Meng, J., et al. (2018). Rapid growth of petroleum coke consumption and its related emissions in China. Applied Energy, 226, 494–502. https://doi.org/10.1016/j.apenergy.2018.05.109. DOI: https://doi.org/10.1016/j.apenergy.2018.06.019

[6] Tang, H., Xu, M., Hu, H., et al. (2018). In-situ removal of sulfur from high sulfur solid waste during molten salt pyrolysis. Fuel, 231, 489–494. https://doi.org/10.1016/j.fuel.2018.05.072. DOI: https://doi.org/10.1016/j.fuel.2018.05.123

[7] Andrade, F. P., Azevedo, F. T., Gimenez, F. I., et al. (2009). Conductive carbon–clay nanocomposites from petroleum oily sludge. Journal of Hazardous Materials, 167(1–3), 879–884. https://doi.org/10.1016/j.jhazmat.2009.01.066. DOI: https://doi.org/10.1016/j.jhazmat.2009.01.070

[8] Gary, J. H., Kaiser, M. J., de Klerk, A., & Handwerk, G. E. (2020). Petroleum refining: technology, economics, and markets. CRC Press.

[9] Hao, L., Yang, Y. H., Kun, Y. Z., et al. (2021). Visbreaking of Heavy Oil in a Mixed Solvent of Subcritical Water and Light Aromatics. Industrial & Engineering Chemistry Research, 60(25), 9059–9067. https://doi.org/10.1021/acs.iecr.1c01277.

[10] Zhang, H. J., Hu, Y. Y., Wang, L. T., et al. (2021). Reaction kinetics analysis of heavy oil visbreaking with reduced diffusion limitation. Journal of Analytical and Applied Pyrolysis, 159, 105296. https://doi.org/10.1016/j.jaap.2021.105296.

[11] Peng, R., Yuan, D. H., Dai, L. S., et al. (2023). Strategies for adding tetralin in thermal processing of heavy oil. Journal of Analytical and Applied Pyrolysis, 170, 105885. https://doi.org/10.1016/j.jaap.2023.105885.

[12] Zhang, R. H., Li, S., Kelly, E. K., et al. (2017). Underground in situ coal thermal treatment for synthetic fuels production. Progress in Energy and Combustion Science, 62, 1–32. https://doi.org/10.1016/j.pecs.2017.05.002.

[13] Gunka, V., & Pyshyev, S. (2015). Lignite oxidative desulphurization. Notice 2: effects of process parameters. International Journal of Coal Science & Technology, 2(3), 196–201. https://doi.org/10.1007/s40789-015-0084-8.

[14] Gary, J. H., Kaiser, M. J., de Klerk, A., & Handwerk, G. E. (2020). Petroleum refining: technology, economics, and markets. CRC Press. DOI: https://doi.org/10.1201/9780429188893

[15] Hao, L., Yang, Y. H., Kun, Y. Z., et al. (2021). Visbreaking of Heavy Oil in a Mixed Solvent of Subcritical Water and Light Aromatics. Industrial & Engineering Chemistry Research, 60(25), 9059–9067. https://doi.org/10.1021/acs.iecr.1c01277. DOI: https://doi.org/10.1021/acs.iecr.1c01093

[16] Zhang, H. J., Hu, Y. Y., Wang, L. T., et al. (2021). Reaction kinetics analysis of heavy oil visbreaking with reduced diffusion limitation. Journal of Analytical and Applied Pyrolysis, 159, 105296. https://doi.org/10.1016/j.jaap.2021.105296. DOI: https://doi.org/10.1016/j.jaap.2021.105296

[17] Peng, R., Yuan, D. H., Dai, L. S., et al. (2023). Strategies for adding tetralin in thermal processing of heavy oil. Journal of Analytical and Applied Pyrolysis, 170, 105885. https://doi.org/10.1016/j.jaap.2023.105885. DOI: https://doi.org/10.1016/j.jaap.2023.105885

[18] Zhang, R. H., Li, S., Kelly, E. K., et al. (2017). Underground in situ coal thermal treatment for synthetic fuels production. Progress in Energy and Combustion Science, 62, 1–32. https://doi.org/10.1016/j.pecs.2017.05.002. DOI: https://doi.org/10.1016/j.pecs.2017.05.003

[19] Gunka, V., & Pyshyev, S. (2015). Lignite oxidative desulphurization. Notice 2: effects of process parameters. International Journal of Coal Science & Technology, 2(3), 196–201. https://doi.org/10.1007/s40789-015-0084-8. DOI: https://doi.org/10.1007/s40789-015-0056-3

[20] Shiraishi, Y., Tachibana, K., Tanaka, H., et al. (2002). Desulfurization and denitrogenation process for light oils based on chemical oxidation followed by liquid−liquid extraction. Industrial & Engineering Chemistry Research, 41(17), 4362–4375. https://doi.org/10.1021/ie010942r. DOI: https://doi.org/10.1021/ie010618x

[21] Yan, J. D., Yang, J. L., & Liu, Z. Y. (2005). SH radical: the key intermediate in sulfur transformation during thermal processing of coal. Environmental Science & Technology, 39(13), 5043–5051. https://doi.org/10.1021/es0491436. DOI: https://doi.org/10.1021/es048398c

[22] Yang, S. G., Fu, X. R., Li, J., et al. (2021). Mechanism insight into the formation of H2S from thiophene pyrolysis: A theoretical study. Frontiers of Environmental Science & Engineering, 15(6), 120. https://doi.org/10.1007/s11783-021-1401-0. DOI: https://doi.org/10.1007/s11783-021-1404-8

[23] Xu, L., Yang, J., Li, Y., et al. (2003). Behavior of organic sulfur model compounds in pyrolysis under coal-like environment. Fuel Processing Technology, 85(8), 1013–1024. https://doi.org/10.1016/S0378-3820(03)00114-0. DOI: https://doi.org/10.1016/j.fuproc.2003.11.036

[24] Liu, T. S., Li, J., Zhang, H. L., et al. (2019). DFT Research on Benzothiophene Pyrolysis Reaction Mechanism. The Journal of Physical Chemistry A, 123(4), 796–810. https://doi.org/10.1021/acs.jpca.8b09880. DOI: https://doi.org/10.1021/acs.jpca.8b09882

[25] Zhu, G. Q., Xia, D. H., & Que, G. H. (2000). Study on the conversion rules of sulfur-containing compounds in the catalytic cracking process. Journal of Fuel Chemistry and Technology, (06), 522–526. (in Chinese)

[26] Zhu, G. Q., Xia, D. H., & Que, G. H. (2000). Study on the pyrolysis rules of sulfur-containing compounds. Journal of Fuel Chemistry and Technology, (06), 518–521. (in Chinese)

[27] Corma, A., Martinez, C., Ketley, G., et al. (2001). On the mechanism of sulfur removal during catalytic cracking. Applied Catalysis A: General, 208(1), 135–152. https://doi.org/10.1016/S0926-860X(00)00712-8. DOI: https://doi.org/10.1016/S0926-860X(00)00693-1

[28] Mizutani, H., Korai, Y., & Mochida, I. (2007). Behavior of sulfur species present in atmospheric residue in fluid catalytic cracking. Fuel, 86(17–18), 2898–2905. https://doi.org/10.1016/j.fuel.2007.03.019. DOI: https://doi.org/10.1016/j.fuel.2007.02.030

Downloads

Published

17-11-2026

Issue

Section

Articles

How to Cite

Zhu, L., Bai, Y., Jia, D., Zhai, Z., & Zhang, L. (2026). Decomposition Mechanism of Organic Sulfide in Heavy Oil during Thermal Reaction. International Journal of Energy, 10(3), 51-57. https://doi.org/10.54097/d1jsbv17