Design and Optimization of E-Band Fluor tellurate Fiber Amplifier Doped with Praseodymium
DOI:
https://doi.org/10.54097/yyjefj52Keywords:
amplifier, The fifth optical telecommunication window, Genetic algorithm, Energy level transition.Abstract
This study focuses on investigating and selecting an appropriate optical fiber material, specifically emphasizing the utilization of fluorotellurate as the base material. The objective is to enhance the performance of the optical fiber material by incorporating praseodymium ions, which possess unique properties advantageous for optical amplification.To gain an accurate understanding of the working principle of the fiber optic amplifier, a mathematical model is developed. This model acts as a valuable tool for simulating and optimizing the amplifier's performance. By conducting rigorous simulations and optimization processes using this model, critical parameters can be identified and fine-tuned to achieve optimal gain characteristics.To verify the efficacy of the designed fiber amplifier, comprehensive experimental tests are conducted. The results from these experiments convincingly demonstrate the amplifier's remarkable gain characteristics, particularly within the E-band frequency range. This research breakthrough not only highlights the amplification capabilities of the designed fiber amplifier but also presents a promising design scheme for future E-band communication systems. By selecting fluorotellurate as the base material and incorporating praseodymium ions, this study introduces an innovative approach to enhance the performance of optical fiber amplifiers. The development of a robust mathematical model enables efficient simulation and optimization, thus acting as a valuable tool for the future design and development of amplifiers. The successful experimental validation further emphasizes the potential of the designed fiber amplifier as a pivotal component for advanced E-band communication systems.
Downloads
References
Jinping Zhang. Application of praseodymium doped fiber amplifier in HFC Network reconstruction of Cable Television [J]. Cable Television Technology, 2004 (08): 81 - 84.
M. Naftaly, S. Shen, and A. Jha, Tm3+-doped tellurite glass for a broadband amplifier at 1.47 µm [J], Appl. Opt. 39 (27), 4979 – 4984 (2000).
M. Naftaly, C. Batchelor, and A. Jha, Pr3+-doped fluoride glass for a 589 nm fiber laser [J], J. Lumin. 91 (3-4), 133 – 138 (2000).
L. R. Moorthy, M. Jayasimhadri, A. Radhapathy, and R. V. S. S. N. Ravikumar, Lasing properties of Pr3+-doped tellurofluorophosphate glasses [J], Mater. Chem. Phys. 93 (2-3), 455 – 460 (2005).
B. Zhou and E. Y. B. Pun, Superbroadband near-IR emission from praseodymium-doped bismuth gallate glasses [J], Opt. Lett. 36 (15), 2958 – 2960 (2011).
D. Hillerkuss, C. Koos, W. Freude, J. Leuthold, 26 Tbit line-rate super-channel transmission utilizing all-optical fast Fourier transform processing [J], Nat. Photonics 5 (2011) 364 – 371.
G.A. Thomas, B.I. Shraiman, P.F. Glodis, M.J. Stephen, Towards the clarity limit in optical fibre(Article) [J], Nature 404 (2000) 262 – 264.
W.H. Lei, B.J. Chen, X.L. Zhang, E.Y.B. Pun, H. Lin, Optical evaluation on Nd3+-doped phosphate glasses for O-band amplification [J], Appl. Opt. 50 (2011) 835 – 841.
K. Driesen, V.K. Tikhomirov, C.G. Walrand, V.D. Rodriguez, A.B. Seddon, Transparent Ho3+ -doped nano-glass-ceramics for efficient infrared emission [J], Appl. Phys. Lett. 88 (2006) 073111.
L.H. Huang, A. Jha, S.X. Shen, X.B. Liu, Broadband emission in Er3+-Tm3+ codoped tellurite fibre [J], Opt. Express 12 (2004) 2429 – 2434
B. Zhou, L. Tao, W. Jin, S. Member, Y.H. Tsang, E.Y. Pun, Super broadband NIR photoluminescence in Nd 3+/Tm 3+/Er 3+ codoped fluor tellurite glasses[J], IEEE Photon. Technol. Lett. 24 (2012) 924 – 926.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
