I Design and Material Selection of Single-Phase Transformers
DOI:
https://doi.org/10.54097/ysbdre44Keywords:
Transformer; Winding; Iron core.Abstract
Transformers are indispensable appliances in our lives and play an essential role in the production, transport, and distribution of electricity for living and working purposes. An apparatus that uses electromagnetic induction to modify voltage is called a transformer. Therefore, this paper focuses on analyzing the basic working principle of a transformer, a detailed disassembly of the transformer, briefly analyzing the structure of the transformer, calculating the core parameters and coil parameters, selecting the appropriate model, and accounting for the results based on the rated power of the given conventional transformer. The goal is to successfully design a small single-phase transformer supplying power to resistive loads. Through a series of calibration calculations, it is finally determined that the selected iron core meets the operating standards and achieves the design purpose.
Downloads
References
E. Altayef, F. Anayi, M. S. Packianather and O. Kherif, "On the Effects of Lamination Artificial Faults in a 15 kVA Three-Phase Transformer Core," in IEEE Access, vol. 10, pp. 19348-19355, 2022.
H. Huang, J. Xu, K. Sun, L. Deng and C. Huang, "Design and Analysis of Tension Control System for Transformer Insulation Layer Winding," in IEEE Access, vol. 8, pp. 95068-95081, 2020.
J.K. Ng,Z.H. Tsai,G.Y. Hsieh et al. A visualisation algorithm for optimal design of small transformers[J/OL]. High Voltage Technology,1-12[2023-12-29].
IEEE, "IEEE Draft Standard for Requirements for Pad-Mounted, Compartmental Type, Self Cooled, Three Phase Distribution Transformers, 10 MVA and Smaller; High Voltage, 34.5kV Nominal System Voltage and Below; Low Voltage, 15kV Nominal System Voltage and Below," in IEEE PC57.12.34/D8, February 2015, vol., no., pp.1-43, 9 June 2015.
C. Huo, S. Wu, Y. Yang, C. Liu and Y. Wang, "Residual Flux Density Measurement Method of Single-Phase Transformer Core Based on Time Constant," in IEEE Access, vol. 8, pp. 171479-171488, 2020.
C. -L. Hsieh and C. -S. Liu, "Design of a Voice Coil Motor Actuator With L-Shape Coils for Optical Zooming Smartphone Cameras," in IEEE Access, vol. 8, pp. 20884-20891, 2020.
S. Jana, P. K. Biswas, T. S. Babu and H. H. Alhelou, "An Improved Parametric Method for Selecting Different Types of Tesla Transformer Primary Coil to Construct an Artificial Lightning Simulator," in IEEE Access, vol. 11, pp. 22174-22186, 2023.
Li HG. Application of high-strength insulating materials in small transformers[J]. Electrotechnical materials,2022(01):49-50.
J. Ruan, Y. Xie, S. Jin, Y. Shi, Y. Tian and Y. Deng, "Inversion of Oil-Immersed Paper Resistivity in Transformer Based on Dielectric Loss Factor," in IEEE Access, vol. 7, pp. 44050-44058, 2019.
Huang Weiming. Introduction to the design principles and techniques of small transformers[J]. Science and Technology Information(Science Teaching and Research),2007,(20):313+365.
Li Xiaohong. Design and production skills of small transformers[J]. Home appliance overhaul technology,2008,(10):44-45.
Yang Jinghua, Zhang Limin. Design of small transformer[J]. Research on Agricultural Mechanisation,2003,(02):231-232.
Wang Xuesong, Chen Gan. Improved design of LX type flexible pin coupling[J]. Science and Technology Information(Science Teaching and Research),2007,(20):365.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Highlights in Science, Engineering and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
