Study on the influence of tooling on the properties of C/Sic bonding materials and its optimization
DOI:
https://doi.org/10.54097/sg3bbs22Keywords:
C/Sic bonding material; Tooling design; Performance impact; Optimize the design; experimental verification.Abstract
This paper studies the influence and optimization of tooling on the properties of C/Sic bonding materials, analyzes the influence of tooling design, materials and processing technology on the properties of C/Sic bonding materials, puts forward the principles and methods of tooling optimization design, and verifies the effectiveness of the optimization scheme through experiments. The results show that the tooling has a significant influence on the properties of C/Sic bonding materials, and optimizing the tooling design is an effective way to improve the properties of C/Sic bonding materials.
Downloads
References
Ding C , Dai Y , Ma C ,et al.The influence of the resistance layer dimension and interface doping on the electrical properties of aGNR/NiO/aGNR-structured resistive random access memory[J].Materials Research Express, 2019, 6(10):105919-.DOI:10.1088/2053-1591/ab4004.
Wagner N , Scheuermann A .On the relationship between matric potential and dielectric properties of organic free soils: A sensitivity study[J].Revue Canadienne De Géotechnique, 2009, 46(10):1202-1215.DOI:10.1139/T09-055.
Deng Y G , Zhao B J , Dai T T ,et al.Study on the dispersibility of modified basalt fiber and its influence on the mechanical properties of concrete[J].Construction and Building Materials, 2022.
Mesli I F Z , Benosman A S , Taleb O ,et al.Study of the Influence of Various Wastes on the Physico-Mechanical and Thermal Properties of Plaster Composite Materials[C]//2024 ASU International Conference in Emerging Technologies for Sustainability and Intelligent Systems (ICETSIS).0[2024-03-28].DOI:10.1109/ICETSIS61505.2024.10459596.
Chengli W , Shuhao S , Hanxu L ,et al.Study on Influence of Semi-carbonization Treatment on Co-gasification of Biomass and Coal[J].Solid Fuel Chemistry, 2024, 57(7):455-471.DOI:10.3103/S0361521923080074.
Ramavat V , Sarangapani R , Reddy S T ,et al.Studies on the Tailoring of Particle Size and Micromeritic Properties of Reduced Shock Sensitivity RDX (RSS-RDX)[J].Central European Journal of Energetic Materials, 2013, 10.
Gupta R D , Gupta P , Khanna R .Parametric optimization of USM parameters by Taguchi and NSGA-II for the development of -channels on pure titanium[J].Grey Systems Theory and Application, 2020, ahead-of-print(ahead-of-print).DOI:10.1108/GS-01-2020-0007.
Rumbao A H ,Bressiani, José Carlos, Bressiani A H A .Influence of Yttrium Oxide Doping on the Microstructures of Alumina-Niobium Carbide Composites[J].Materials Science Forum, 2003, 416-418:469-474.DOI:10.4028/www.scientific.net/MSF.416-418.469.
Su,Cheng,Xing,et al.Salt-fog corrosion behavior of C/SiC and its effect on ablation resistance[J].Journal of Materials Science & Technology, 2019, v.35(12):32-37.DOI:10.1016/j.jmst.2019.04.037.
Babu J S S , Heo M , Kang C G .Study of Machining Parameter Optimization in Drilling of Magnesium Based Hybrid Composites Reinforced with SiC/CNT[J].Key Engineering Materials, 2020, 846:42-46.DOI:10.4028/www.scientific.net/KEM.846.42.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Highlights in Science, Engineering and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
