Optimization of Layering Algorithm and Print Order in 3D Printing
DOI:
https://doi.org/10.54097/1at8m440Keywords:
3D printing, layering algorithm, equal thickness layering, adaptive layering algorithm.Abstract
3D printing (3DP) is an emerging additive manufacturing technology, which has carried out a new change in the manufacturing industry and effectively promoted the related development of the intelligent manufacturing industry. However, traditional 3DP has limitations such as low accuracy, poor mechanical properties, and easy collision of nozzles when printing and printed products cannot meet some production needs. This paper begins with the two main types of algorithms used in 3DP technology: the adaptive algorithm and the equal thickness layering algorithm. It then further divides the adaptive algorithm into four categories based on different optimization focus directions. In this paper, the principles, benefits, and drawbacks of various algorithms as well as print order optimization are analyzed, and the prospects of 3DP are discussed. This paper illustrates the performance and improvement effect of hierarchical algorithm and order optimization in 3DP and provides a more comprehensive reference for scholars in the research field of algorithm optimization direction.
Downloads
References
[1] Meng W. Analysis of 3D printing technology and application trends. Technology Innovation and Application, 2021, 339 (11): 146-148.
[2] Li Xuan, Mo Hong, Li Shuang-Shuang, et al. Research Progress on 3D Printing Technology Process Control Problem. Acta Automatica Sinica, 2016, 42 (7): 983-1003.
[3] Liu Hongxia. A Study of Optimization of Slicing Direction and Slicing Algorithm in 3D Printing. Xidian University, 2014.
[4] Wang Qichao. Research on the algorithm of layered slicing for fused deposition 3D printing. Inner Mongolia University of Science and Technology, 2023.
[5] Siraskar Nandkumar, Paul Ratnadeep, Anand Sam. Adaptive Slicing in Additive Manufacturing Process Using a Modified Boundary Octree Data Structure. Journal of Manufacturing Science and Engineering, 2015, 137 (1): 011007.
[6] Lau T Y, Chen L, He D, et al. Partition-based print sequence planning and adaptive slicing for scalar field-based multi-axis additive manufacturing. Computer-Aided Design, 2023, 163: 103576.
[7] Ouyang Xuefeng. Research on the Algorithm of Layered Slicing for Fused Deposition 3D Printing. Harbin University of Science and Technology, 2022.
[8] Zhang Zhengyan, Sanjay Joshi. An improved slicing algorithm with efficient contour construction using STL files. The International Journal of Advanced Manufacturing Technology, 2015, 80 (5-8): 1347-1362.
[9] Zhao D, Guo W. Shape and performance controlled advanced design for additive manufacturing: a review of slicing and path planning. Journal of Manufacturing Science and Engineering, 2020, 142 (1): 010801.
[10] Huang B, Singamneni S B. Curved layer adaptive slicing (CLAS) for fused deposition modelling. Rapid Prototyping Journal, 2015, 21 (4): 354-367.
[11] Li Hongbin, Wang Taiyong, Syb Jian, et al. The adaptive slicing algorithm and its impact on the mechanical property and surface roughness of freeform extrusion parts. Virtual and Physical Prototyping, 2016, 11 (1): 27-39.
[12] Lv N, Ouyang X, Qiao Y. Adaptive layering algorithm for FDM-3D printing based on optimal volume error. Micromachines, 2022, 13 (6): 836.
[13] Hu Bingbing, Jin Guoqing, Sun Lining. A novel adaptive slicing method for additive manufacturing. In 2018 IEEE 22nd International Conference on Computer Supported Cooperative Work in Design (CSCWD), IEEE, 2018, pp. 218-223.
[14] Wei Xiaoling, Sun Xiujun, Meng Yi. Research on Adaptive Layering Algorithm for Outer contour of 3D Printed Parts. Machine Design & Research, 2020, 36 (01):149-151+168.
[15] Xu K, Li Y, Chen L, et al. Curved layer based process planning for multi-axis volume printing of freeform parts. Computer-Aided Design, 2019, 114: 51-63.
[16] Rodriguez-Padilla C, Cuan-Urquizo E, Roman-Flores A, et al. Algorithm for the conformal 3D printing on non-planar tessellated surfaces: Applicability in patterns and lattices. Applied Sciences, 2021, 11 (16): 7509.
[17] Bi D, Duan M, Lau T Y, et al. Strength-enhanced volume decomposition for multi-directional additive manufacturing. Additive Manufacturing, 2023, 69: 103529.
[18] Tam K M M, Mueller C T. Additive manufacturing along principal stress lines. 3D Printing and Additive Manufacturing, 2017, 4 (2): 63-81.
[19] Li S, Yuan S, Zhu J, et al. Additive manufacturing-driven design optimization: Building direction and structural topology. Additive Manufacturing, 2020, 36: 101406.
[20] Beattie N, Bock N, Anderson T, et al. Effects of build orientation on mechanical properties of fused deposition modeling parts. Journal of Materials Engineering and Performance, 2021, 30: 5059-5065.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Highlights in Science, Engineering and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
