Enhancing Hand Exoskeletons in Material Selection and Design
DOI:
https://doi.org/10.54097/vq1sxt69Keywords:
Exoskeleton, hand, materials, design.Abstract
Nowadays, flexible hand exoskeletons are increasingly recognized for their applications in both rehabilitation medicine and industrial applications. This research endeavors to scrutinize and refine the choice of materials and the mechanical design for flexible hand exoskeletons, prioritizing improvements in user comfort, flexibility, durability, and lightness. The research employs a comprehensive review of the mechanical properties of commonly used materials, such as silicone, spandex, and nylon. It also evaluates their suitability in different structural designs. The study finds that silicone’s air permeability is limited although it offers excellent comfort and pressure distribution. Spandex provides superior flexibility but suffers from durability reducing as time goes by. Nylon offers excellent durability and structural stability but is less effective in terms of elasticity and air permeability. The findings advise that a combination of these materials, with the help of innovative design strategies, can achieve a balanced performance. After that flexible hand exoskeletons can meet the diverse requirements. The study concludes that future designs should keep exploring material combinations and structural innovations in order to enhance user experience and extend the practical applications of flexible hand exoskeleton.
Downloads
References
[1] Liu C, Lu J, Yang H, Guo K. Current State of Robotics in Hand Rehabilitation after Stroke: A Systematic Review. Applied Sciences. 2022; 12(9):4540 DOI: https://doi.org/10.3390/app12094540
[2] Ha T.-J., Lee J.-S., Back S.-H., Kim S.-H., Lee J.-Y. Wearable robot design for industrial application. Journal of the Korean Society of Precision Engineering, 2012, 29(5): 433-440. DOI: https://doi.org/10.7736/KSPE.2012.29.4.433
[3] Asbeck A.T., Rossi S.M.M.D., Holt K.G., Walsh C.J. A biologically inspired soft exosuit for walking assistance. International Journal of Robotics Research, 2015, 34(6): 744-762. DOI: https://doi.org/10.1177/0278364914562476
[4] Xiloyannis M., Chiaradia D., Frisoli A., Masia L. Characterisation of pressure distribution at the interface of a soft exosuit: Towards a more comfortable wear. Wearable Robotics: Challenges and Trends, 2019, 22: 135-147. DOI: https://doi.org/10.1007/978-3-030-01887-0_7
[5] Tijjani I., Kumar S., Boukheddimi M. A survey on design and control of lower extremity exoskeletons for bipedal walking. Applied Sciences, 2022, 12(5): 2395. DOI: https://doi.org/10.3390/app12052395
[6] Rose C.G., O’Malley M.K. Hybrid rigid-soft hand exoskeleton to assist functional dexterity. IEEE Robotics and Automation Letters, 2019, 4(1): 73-80. DOI: https://doi.org/10.1109/LRA.2018.2878931
[7] Secciani N., La Scalia G., Mencattelli M., Conti A., Carrozza M.C. Wearable robots: an original mechatronic design of a hand exoskeleton for assistive and rehabilitative purposes. Frontiers in Neurorobotics, 2021, 15: 1-12. DOI: https://doi.org/10.3389/fnbot.2021.750385
[8] Chaichaowarat R., Prakthong S., Thitipankul S. Transformable wheelchair–exoskeleton hybrid robot for assisting human locomotion. Robotics, 2023, 12(1): 16. DOI: https://doi.org/10.3390/robotics12010016
[9] Jin J., Yang S., Bae B.-S. Mechanically improved sol-gel derived methacrylate-siloxane hybrid materials with urethane linkage. Journal of Sol-Gel Science and Technology, 2012, 61(3): 321-329. DOI: https://doi.org/10.1007/s10971-011-2630-5
[10] Kim Y.H., Bae J.Y., Jin J.H., Kwak S.Y., Bae B.S. Microcellular foaming of silicone rubber with supercritical carbon dioxide. Korean Journal of Chemical Engineering, 2010, 28(4): 679-688. DOI: https://doi.org/10.1007/s11814-007-0025-7
[11] Jiang S., Yong Z. Modulation of mechanical properties of silica-filled silicone rubber by cross-linked network structure. Polymers, 2024, 16(16): 2304. DOI: https://doi.org/10.3390/polym16162304
[12] Tang K.-P.M., Kan C.-W., Fan J.-T., Tso S.-L. Effect of softener and wetting agent on improving the flammability, comfort, and mechanical properties of flame-retardant finished cotton fabric. Cellulose, 2017, 24(6): 2619-2634. DOI: https://doi.org/10.1007/s10570-017-1268-z
[13] Frigione M., Rodríguez-Prieto A. Can accelerated aging procedures predict the long-term behavior of polymers exposed to different environments? Polymers, 2021, 13(16): 2688. DOI: https://doi.org/10.3390/polym13162688
[14] Mimaroglu A., Unal H. Friction and wear characteristics of glass fiber- and nylon-reinforced polymers under various sliding speeds and loads. IntechOpen, 2021, 9(4): 1021-1030.
[15] Djouani K., Oosthuizen C. A review of active hand exoskeletons for rehabilitation and assistance. Robotics, 2021, 10(1): 40.
[16] Midha V., Kumar S.S., Kumar M.N. Investigation on permeability and moisture management properties of different denim fabrics after repeated laundering. Journal of the Textile Institute, 2017, 108(1): 71-77. DOI: https://doi.org/10.1080/00405000.2016.1153873
[17] Du Plessis T., Djouani K., Oosthuizen C. A review of active hand exoskeletons for rehabilitation and assistance. Robotics, 2021, 10(1): 40. DOI: https://doi.org/10.3390/robotics10010040
[18] Young A., Ferris D. State of the art and future directions for lower limb robotic exoskeletons. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 2017, 25(2): 171-182. DOI: https://doi.org/10.1109/TNSRE.2016.2521160
[19] Saldarriaga A., Gutierrez-Velasquez E.I., Colorado H.A. Soft hand exoskeletons for rehabilitation: approaches to design, manufacturing methods, and future prospects. Robotics, 2024, 13(1): 50. DOI: https://doi.org/10.3390/robotics13030050
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Highlights in Science, Engineering and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
