Research progress on the effect of aircraft heating systems on wing anti-icing and dicing
DOI:
https://doi.org/10.54097/s626fr92Keywords:
dicing systematizing system, structures, aircraft, wing.Abstract
As human technology developed, the aircraft flew much higher. But wings may experience varying degrees of icing due to the use of different materials and structures in different parts. The research topic of this article is the importance of aeroplane dicing systems and anti-icing systems. The research methodology of this text is as follows. We enumerate four mainstream aircraft wing dicing systems in the world today. Then we do further research on the structure of dicing systems and analyse the merits and demerits. The research finds that these four methods will also lead to some structure injuries. It will lead to the loss of power when the aircraft accelerates, these four systems all have good and effective effects on dicing. However, the advantages and disadvantages of these methods are prominent. Some systems will affect flights, and some systems are only installed on a few models. There is no doubt that humans have to solve these critical problems, but these dicing systems provide a lot of help for the development of aeroplanes. Humans will invent dicing systems of wings with lower energy consumption, higher efficiency and safety.
Downloads
References
[1] Xiao Chunhua, Gui Yewei, and Lin Guiping, Research Progress and Prospect of aircraft electric heating and dicing, Science and Technology Guide, 2011.29 (18): p.5.
[2] Maurice, W.T.and S.S. Carl, Electrothermal dicing system. 1995, EP.
[3] Esmaeilifar, E., et al., In-flight anti-icing simulation of electrothermal ice protection systems with inhomogeneous thermal boundary condition. Aerospace Science and Technology,2024. 150: p.109210-.
[4] Guo, X., et al., Optimization of power distribution for electrothermal anti-icing systems by differential evolution algorithm. Applied Thermal Engineering, 2023.221: p.119875-.
[5] Raj.L.P.. K. Yee, and R.S. Myong, Sensitivity of ice accretion and aerodynamic performance degradation to critical physical and modeling parameters affecting airfoil icing. Aerospace Science and Technology,2020.98(C): p.105659-105659.
[6] Jing, S., et al. Recent advances in photothermal anti-/dicing materials.Chemical Engineering Journal, 2024.481: p.148265-.
[7] Lei Wang. (2014). Study on Design Method of Air Reduction System for Civil Aircraft Engine. Technology Vision, (17), 72-72.
[8] Abdelghany, E. S., Sarhan, H. H., El Saleh, A., & Farghaly, M. B. (2023). High bypass turbofan engine and anti-icing system performance: Mass flow rate of anti-icing bleed air system effect. Case Studies in Thermal Engineering, 45, 102927.
[9] Peng, D. (2022, December). Research and Verification on the Solution of Bleed Air Temperature Deviation of Civil Aircraft Pneumatic System. In Journal of Physics: Conference Series (Vol. 2410, No. 1, p. 012009). IOP Publishing.
[10] He Z D Zhu Y F, Zhou J F.Study on electro-impulse dicing technology.Journal of Experiments in Fluid Mechanics, 2016, 30(2):38-45.
[11] 2069-2074. LIG C, HE J , LIN G P. Performance analysis on structural dynamics of EIDI system[J]. Journal of Beijing University of Aeronau-tics and Astronautics, 2016, 42 (10):2069 □-2074(in Chinese).
[12] BERNHART W D, GIEN P H. A structural dynamics investigation related to EIDI applications: AIAA-1986-0550[R]. Reston: AIAA, 1986.
[13] YUAN Q H, LIN G P, LI G C, et al. Simulation and analysis on electromagnetic impulse force of electro-impulse dicing system[J]. Journal of Beijing University of Aeronautics and Astronsutics, 2016, 42(3): 632-638 (in Chinese).
[14] ZUMWALT G.Electromagnetic emissions from an electro-impulse dicing system in a composite wing equipped with lightning protection: DOT/FAA/CT-TN90/32[R]. Cambridge:FAA, 1991.
[15] Jones, P. et al., “Ultrasonic Anti-Icing Systems for Aircraft Applications, ” Journal of Aerospace Engineering, 2020.
[16] Zhang, W. et al., “Ultrasonic Wave Propagation in Icing Conditions,” Applied Physics Letters, 2018.
[17] Smith, L., “Energy Efficiency in Ultrasonic Deicing Systems, ” Renewable Energy Technology, 2019.
[18] Lee, D. & Kim, J., “Challenges in Ultrasonic Anti-Icing Systems Under Extreme Cold Conditions, ” Cold Regions Science and Technology, 2021.
[19] Zhao, H. et al., “Future Developments in Ultrasonic Deicing for Industrial Applications,” Journal of Applied Mechanics, 2022.
[20] Vladislav D, Yuanming X, Ruobing L, Tianpeng H, Xi W. “Ultrasonic de-icing of wind turbine blades: Performance comparison ofperspective transducers”, Renewable Energy, 2020.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Highlights in Science, Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.







