Design of Explosion-Proof Switch Safety Assessment System
DOI:
https://doi.org/10.54097/kpyqdk91Keywords:
Explosion-proof switch; Fault current; Wear; Safety assessment.Abstract
Explosion-proof switches are essential electrical devices in explosive environments and serve as a critical guarantee for safe production in such locations. Based on an analysis of the status of safety assessment technologies both domestically and internationally, this paper proposes a safety assessment technology for explosion-proof switches, grounded in the inverse relationship between contact lifespan and interruption current. Additionally, it designs the overall structure of the safety assessment system for explosion-proof switches and establishes methods for result evaluation, providing a reference for the assessment technology of explosion-proof switches.
Downloads
References
[1] B. Wu, J. Jiang, X. Zhou and Z. Tian, "Research and Application of Synthesis Safety Evaluation and Intelligence Decision System on Coal Mine," 2009 WRI Global Congress on Intelligent Systems, Xiamen, China, 2009, pp. 280-284 DOI: https://doi.org/10.1109/GCIS.2009.83
[2] A. A. Abdellatif and F. Holzapfel, "Model Based Safety Analysis (MBSA) Tool for Avionics Systems Evaluation," 2020 AIAA/IEEE 39th Digital Avionics Systems Conference (DASC), San Antonio, TX, USA, 2020, pp. 1-5 DOI: https://doi.org/10.1109/DASC50938.2020.9256578
[3] S. Xu, H. Zeng, X. Jiang, G. Qi and G. Han, "Reliability Evaluation of Dual Stator Switched Reluctance Motor System Based on Enhanced Reliability Model," 2023 26th International Conference on Electrical Machines and Systems (ICEMS), Zhuhai, China, 2023, pp. 3651-3656 DOI: https://doi.org/10.1109/ICEMS59686.2023.10344744
[4] J. Huan, C. Yongfeng, L. Bin, G. Chunhui and L. Huibin, "Research on Vibration Measurement Technology and Safety Evaluation Method of Outdoor Isolating Switch," 2022 IEEE 6th Advanced Information Technology, Electronic and Automation Control Conference (IAEAC), Beijing, China, 2022, pp. 513-517 DOI: https://doi.org/10.1109/IAEAC54830.2022.9930021
[5] J. Si, E. Tang and G. Xu, "Safety Research in Typical Connection Models of Distribution System," 2010 Asia-Pacific Power and Energy Engineering Conference, Chengdu, China, 2010, pp. 1-4 DOI: https://doi.org/10.1109/APPEEC.2010.5449484
[6] Y. Li et al., "Experimental Evaluation of Dynamic On-resistance and Switching Performance of Cascode GaN HEMTs," 2023 14th International Conference on Reliability, Maintainability and Safety (ICRMS), Urumuqi, China, 2023, pp. 682-686 DOI: https://doi.org/10.1109/ICRMS59672.2023.00125
[7] G. K. S, S. R. Kakarlapudi and R. Sultana, "Design of Digital Twin for Safety Systems in Electric Vehicles," 2023 International Conference on Next Generation Electronics (NEleX), Vellore, India, 2023, pp. 1-6 DOI: https://doi.org/10.1109/NEleX59773.2023.10421634
[8] M. Biao and X. Hu, "Quantitative Evaluation of System Safety Assessment Considering EWIS Failures," 2022 2nd International Conference on Electrical Engineering and Control Science (IC2ECS), Nanjing, China, 2022, pp. 975-978 DOI: https://doi.org/10.1109/IC2ECS57645.2022.10088159
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Highlights in Science, Engineering and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
