Numerical Simulation of Subcooled Boiling in Swing Rectangular Channel based on Non-Equilibrium Thermal Model

Authors

  • Le Liu
  • Wenzhen Chen
  • Cong Wang
  • Jie Song
  • Xiaoxiao Wang

DOI:

https://doi.org/10.54097/hset.v15i.2999

Keywords:

Non-equilibrium Thermal Model; Heat Transfer Characteristics; Numerical Simulation.

Abstract

Theoretical analysis on the fluid flow in a vertical rectangular channel under swing motion is performed to establish the mathematical model which is based on Eulerian two-fluid framework and non-equilibrium subcooled boiling model. It is analyzed that the flow and heat transfer characteristics and the force of the fluid under the condition of forced flow and swing motion condition. The results show that, for the existence of Coriolis force, the period of acceleration of the fluid is 1/2 of the period of swing angle, and the phase differ. In the rectangular channel, the angle of pressure isoline and horizontal line is sinusoidal likely, which is behind the swing angle phase; Due to the influence of the periodic force field, with the increase of the swing angle, the bubbles in the rectangular channel move to one side, and the wall temperature also increases, which leads to the deterioration of heat transfer; In a swing period, the vapor volume fraction at the outlet and the pressure drop between the inlet and outlet of the rectangular channel fluctuate, and the vapor volume fraction is located at the minimum pressure drop, and the vapor volume fraction at the outlet fluctuates in a trough type.

Downloads

Download data is not yet available.

References

HUANG Zhen, GAO Puzhen, TAN Sichao, SHE Yingjuan. Mechanism analysis of effect of rolling motion on heat transfer. Nuclear Power Engineering, vol.31, no.3, pp.50-54, 2010(in Chinese).

Kurul N, Podowski M Z. On the modeling of multidimensional effects in boiling channels. In Proceedings of the 27th National Heat Transfer Conference, Minneapolis, Minnesota, USA, pp.1-14, July. 1991.

COLE R. A Photographic Study of Pool Boiling in the Region of the Critical Heat Flux. Aiche Journal, vol.6, no.4, pp.533-542, 1960.

LEMMERT M, CHAWLA L M. Influence of flow velocity on surface boiling heat transfer coefficient in Heat Transfer in Boiling. New York: Academic Press and Hemisphere, 1977.

Del Valle V H, Kenning D B R. Subcooled flow boiling at high heat flux. International Journal of Heat and Mass Transfer, vol.28, no.10, pp. 1907-1920, 1985.

LAVIEVILLE J, QUEMERAIS E. MIMOUNI S. NEPTUNE CFD V1.0 Theory Manual. France: CEA/EDF, vol.28, no.10, pp. 1907-1920, 2005.

Downloads

Published

26-11-2022

How to Cite

Liu, L., Chen, W., Wang, C., Song, J., & Wang, X. (2022). Numerical Simulation of Subcooled Boiling in Swing Rectangular Channel based on Non-Equilibrium Thermal Model. Highlights in Science, Engineering and Technology, 15, 291-296. https://doi.org/10.54097/hset.v15i.2999