Strain Statistics Evolution in Crystalline Material through Statistical Analysis
DOI:
https://doi.org/10.54097/hset.v20i.3516Keywords:
Crystalline Material; Statistical Analysis; CPFEM Simulation.Abstract
The deformation in crystalline materials is highly heterogeneous. Many different types of distributions are employed to describe the stresses and strains statistics in different crystalline materials. The objective of the current study is to find a proper distribution to describe the strain statistics during deformation evolution in crystalline materials with different crystal type. Both experiment and CPFEM simulation were carried out at the same time. For the experimental data, the local strain distribution from different crystalline materials with BCC, HCP, FCC crystals under tensile loading can be well described by generalized extreme value fit. Additionally, we use the simulation data from nickel-base superalloy as an example to justify this result, and this also indicates that both plastic and elastic conform to the generalized extreme value fit for all deformation stage ranging from 0% to 30% strain.
Downloads
References
Tang, A., Liu, H., Liu, G., Zhong, Y., Wang, L., Lu, Q., ... & Shen, Y. (2020). Lognormal distribution of local strain: a universal law of plastic deformation in material. Physical Review Letters, 124(15), 155501.
Martin, G., Caldemaison, D., Bornert, M., Pinna, C., Bréchet, Y., Véron, M., ... & Pardoen, T. (2013). Characterization of the high temperature strain partitioning in duplex steels. Experimental Mechanics, 53(2), 205-215.
Chen, J., Wang, Z., & Korsunsky, A. M. (2022). Multiscale stress and strain statistics in the deformation of polycrystalline alloys. International Journal of Plasticity, 152, 103260.
Chen, J., & Korsunsky, A. M. (2021). Why is local stress statistics normal, and strain lognormal?. Materials & Design, 198, 109319.
Manonukul, A., & Dunne, F. P. E. (2004). High- and low-cycle fatigue crack initiation using polycrystal plasticity. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 460(2047), 1881–1903.
Korsunsky, A. M., Dini, D., Dunne, F. P., & Walsh, M. J. (2007). Comparative assessment of dissipated energy and other fatigue criteria. International journal of fatigue, 29(9-11), 1990-1995.
Song, X., Zhang, S. Y., Dini, D., & Korsunsky, A. M. (2008). Finite element modelling and diffraction measurement of elastic strains during tensile deformation of HCP polycrystals. Computational Materials Science, 44(1), 131–137.
Jaladurgam, N. R., Li, H., Kelleher, J., Persson, C., Steuwer, A., & Colliander, M. H. (2020). Microstructure-dependent deformation behaviour of a low γ′ volume fraction Ni-base superalloy studied by in-situ neutron diffraction. Acta Materialia, 183, 182–195.
Chen, L., Liu, W., & Song, L. (2021). A multiscale investigation of deformation heterogeneity in additively manufactured 316L stainless steel. Materials Science and Engineering: A, 820, 141493.
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.







