Research of Heavy-Duty Gas Turbines through Computer Mathematical Statistics and Big Data Analysis
DOI:
https://doi.org/10.54097/hset.v27i.3842Keywords:
Heavy-duty gas turbines; turbines; heat engine.Abstract
Heavy duty gas turbine is the core power equipment of energy efficient conversion and clean utilization system in the 21st century and even longer. It is important for an efficient, clean and safe energy system. The heavy duty gas turbine is developed and manufactured at a level that represents a country's heavy industry and is by far the most efficient thermoelectric conversion equipment. This paper introduces the development status of the heavy duty gas turbine industry at home and abroad, summarizes the working principle and characteristics of heavy duty gas turbines, and prospects the development trend of heavy duty gas turbines.
Downloads
References
Bahrami, S., Ghaffari, A., Sadati, S.H. (2014) Identifying a simplified model for heavy duty gas turbine. J MECH SCI TECHNOL., 28: 2399–2408.
Roberto, M. (2013) Pollutant Emission Validation of a Heavy-Duty Gas Turbine Burner by CFD Modeling. Machines., 1: 81–81.
Brandt, D.E. (1988) The Design and Development of an Advanced Heavy-Duty Gas Turbine. J Eng Gas Turb Power., 2: 243–250.
Jiang, Y., Zheng, Q., Dong, P. (2014) Research on heavy-duty gas turbine vane high efficiency cooling performance considering coolant phase transfer. Appl Therm Eng., 73: 1177–1193.
Xie, G., Hai-Ying, Q.I., Yu-Hong, L.I. (2010) Emission Peformance of the Dry Low NOx Combustors for R0110 Heavy-duty Gas Turbine. Proceedings of the Csee., 30: 51–57.
Zhang, W.J., Liu, S.M., Xing-Xing, P.U. (2012) Research on the Startup Simulation of Single Shaft Heavy-duty Gas Turbine based on Simulink. Gas Turbine Technology., 3: 45–53.
Chen, F.X. (2006) Research and Practice of Localization Manufacturing Technology for V94. 3A Heavy-Duty Gas Turbine. Electrical Equipment., 2: 25–22.
Ying, P., Schulenberg, T. (1999) Material testing for fatigue design of heavy-duty gas turbine blading with film cooling. European Structural Integrity Society., 23: 155–162.
Liu, K., Cai, J.J., Zhang, B.C. (2009) Experimental Study on the Atomization Behavior of Fuel Injector Group of a Heavy-Duty Gas Turbine. Journal of Northeastern University(Natural ence)., 30: 1155–1158.
lopment of Study on Life Prediction for Turbine Blade of Heavy-Duty Gas Turbine. Gas Turbine Technology., 5: 345–362.
Najjar, Y., Alalul, O., Abu-Shamleh, A. (2020) Degradation analysis of a heavy-duty gas turbine engine under full and part load conditions. Int J Energ Res., 44: 421–433.
Sawiński, D., Ziókowski, P., Badur, J. (2020) Thermal failure of a second rotor stage in heavy duty gas turbine. Eng Fail Anal., 115: 104672.
Messina, G., Bo, A., Nobili, M. (2021) Aergia number: A new non-dimensional group for gas turbine power estimation.Int J Energ Res., 45:556–573.
Palmieri, A., Lanzarotto, D., Cacciacarne, S. (2021) An innovative sliding mode load controller for gas turbine power generators: Design and experimental validation via real-time simulation. Energy., 217: 119363.
Mr, A., Rp, A., Pm, B. (2021) An automated strategy for gas turbines off-design predictions with a CFD-based throughflow method. Appl Therm Eng., 192: 116783.
Fu, Z., Gao, H., Zeng, Z. (2020) Generation characteristics of thermal NOx in a double-swirler annular combustor under various inlet conditions. Energy., 200: 117487.
Nassini, P.C., Pampaloni, D., Meloni, R. (2021) Lean blow-out prediction in an industrial gas turbine combustor through a LES-based CFD analysis. Combust Flame., 229: 111391.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
