Research on Vision Measurement System of Mechanical Workpiece Based on Machine Vision
DOI:
https://doi.org/10.54097/hset.v1i.428Keywords:
Machine vision, Mechanical workpiece measurement, OCRAbstract
With the rapid development of modern industrial industry, the workpiece measurement system of many industrial products gradually exceeds the operating load, and the operating efficiency is not high, the cycle is too long, and the accuracy rate is low. In order to solve the problem of automatic and intelligent measurement of mechanical workpieces in industrial production, an automatic mechanical workpiece measurement system based on machine vision is designed in this paper. The digital division of the workpiece is carried out automatically, and fast visual measurement is performed to judge whether the workpiece is qualified or not, which greatly improves the accuracy of workpiece detection. On this basis, this paper optimizes the machine vision measurement system of the workpiece based on the picture and label recognition system to make its operation efficiency higher and operation accuracy better.
Downloads
References
Z. Zhang, Z. Chen, J. Shi, F. Jia and M. Dai, "Surface Roughness Vision Measurement in Different Ambient Light Conditions," 2008 15th International Conference on Mechatronics and Machine Vision in Practice, Auckland, New Zealand, 2008, pp. 1-4.
Xiang-Na Tang and Yao-Nan Wang, "Visual inspection of workpiece quality," 2011 International Conference on Image Analysis and Signal Processing, Wuhan, China, 2011, pp. 434-438.
M. Ngom and F. Nagata, "Detection of workpieces on a CNC machining table for measurement and automatic tool positioning," 2014 14th International Conference on Control, Automation and Systems (ICCAS 2014), Gyeonggi-do, Korea (South), 2014, pp. 55-58.
C. Si and Y. Zhang, "Research of online measurement and inspection approaches for 2.5 dimensional workpieces," 2015 IEEE International Conference on Information and Automation, Lijiang, China, 2015, pp. 1926-1930.
Liang-yu Lei, Xiao-jun Zhou and Ming-qing Pan, "Automated Vision Inspection System for the Size Measurement of Workpieces," 2005 IEEE Instrumentationand Measurement Technology Conference Proceedings, Ottawa, ON, Canada, 2005, pp. 872-877.
Quanli Liu, Jia Li and Peifen Chen, "Measurement of cylinder diameter based on computer vision system," IET International Conference on Information Science and Control Engineering 2012 (ICISCE 2012), Shenzhen, 2012, pp. 1-4.
J. Zhou, X. Qu and B. Liu, "A fast location and pose detection method based on geometric features of inner and outer contours of workpiece," 2016 12th International Conference on Natural Computation, Fuzzy Systems and Knowledge Discovery (ICNC-FSKD), Changsha, China, 2016, pp. 607-611.
C. Huang, D. Chen and X. Tang, "Robotic Hand-Eye Calibration Based on Active Vision," 2015 8th International Symposium on Computational Intelligence and Design (ISCID), Hangzhou, China, 2015, pp. 55-59.
H. -x. Li, G. -r. Wang and Y. -h. Shi, "Application of Epipolar Line Rectification to the Stereovision-Based Measurement of Workpieces," 2009 International Conference on Measuring Technology and Mechatronics Automation, Zhangjiajie, China, 2009, pp. 758-762.
S. Palani and Y. Kesavanarayana, "Prediction of surface roughness in end milling process by machine vision using neuro fuzzy network," 2014 International Conference on Science Engineering and Management Research (ICSEMR), Chennai, India, 2014, pp. 1-5.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
