Application and Prospect of New Masonry Infilled Wall

Xinyuan Cao; Shiheng Sun; Yin Zhu

doi:10.54097/hset.v28i.4872

Authors

Xinyuan Cao
Shiheng Sun
Yin Zhu

DOI:

https://doi.org/10.54097/hset.v28i.4872

Keywords:

AAC, anti-seismic property, Mechanical property, compressive property, New masonry infilled wall.

Abstract

As a new wall material, autoclaved aerated concrete (AAC) can realize the self-insulation system of "single material" wall in different climate regions in China. At the same time, it has obvious advantages in engineering construction, such as saving resources, easy processing, and good fire resistance. Therefore, AAC can be used as the preferred wall material for infilled walls of frame structures and load-bearing walls of residential multi-story buildings. In this paper, firstly, the main characteristics of AAC blocks are briefly explained. Then, the seismic performance of Reinforced Concrete frame of AAC, the impact of hole characteristics on its mechanical properties, and its compressive properties are analyzed and explored. It is expected that AAC blocks will be widely used and developed in the process of filling construction in the future.

Downloads

Download data is not yet available.

References

Xiong Linqiang. Introduction to the development status and structural characteristics of AAC blocks. Building Materials Development Orientation, 2021, 19(16): 11-13.

Cao Hong. Analysis of the application of new wall materials in building energy efficiency. Construction Technology Development, 2021, 48(01): 137-138.

Liu ZQ, Zhang Q, Yang JC. Current status of research on autoclaved aerated concrete blocks. Brick and Tile, 2022(03): 34-36+39.

Zhang Xunli, Liu Yuting, Qian Hongmei. Analysis of influencing factors of autoclaved aerated concrete preparation process. Anhui Architecture, 2021, 28(08): 137-139.

Zhang Yongbing, Guo Xinhua, Zhu Tengfei, Hao Ximi. Research on the seismic performance of new masonry infilled wall RC frame structure. Journal of Guangxi University (Natural Science Edition), 2021, 46(05): 1166-1176.

Wang Honghong, Liu Bing, Yang Youshan. Seismic effects of new infilled wall materials on frames. Shanxi Architecture, 2015, 41(18): 25-26.

Zhou Xiaojie, Cheng Changyun, Du Jinpeng, Chen Kang, Chen Peiqi. Seismic performance test of AAC block masonry infilled wall frame structure. World Earthquake Engineering, 2022, 38(02): 46-57.

Zhou Xiaojie. Research on the seismic performance of new masonry infilled wall frame structure with flexible connection. Tianjin: Tianjin University, 2014.

Geng Jingya. Study on the effect of pore characteristics on the mechanical properties of AAC. North China University of Water Resources and Hydropower, 2018.

Guo Xiaolu, Song Meng. Research progress on the pore structure and characterization methods of AAC. Materials Guide, 2018, 32(S2): 440-445.

Cao Jingsheng. Experimental study on mechanical properties of AAC materials. Proceedings of the 2021 Academic Conference on Industrial Construction (Previous), 2021: 300-303+381.

Hou Jie. Experimental study on compressive properties of AAC materials under high-speed impact and three-way stress state. Tianjin University, 2018.