Recent Research and Prospect of 3D Printing Technology in the Preparation of New Ceramic Materials
DOI:
https://doi.org/10.54097/hset.v52i.9849Keywords:
3D Printing, Ceramic molding, laser sintering technology, ceramic materials, Bone tissue engineering, Porous ceramicsAbstract
3D printing, as a new generation of molding technology, has the advantages of simple operation, high molding efficiency and high precision, so that 3D printing molding functional ceramic components in medicine, aerospace and other fields have broad application prospects. This paper mainly introduces the forming process and materials of 3D printed ceramics, as well as the development and application status of 3D printed ceramics in functional ceramics and research status at home and abroad.
Downloads
References
Ji Hongchao, Zhang Xuejing. Research Progress of Ceramic 3D Printing Technology and Materials [J]. Materials Engineering. July 2019, Vol. 46, No. 7, 19-28.
Zhangwei Chen, Ziyong Li. 3D printing of ceramics: A review [J]. Journal of the European Ceramic Society. Journal of the European Ceramic Society, 39 (2019), 661–687.
Griffith M L, Hallroan J W. .Freeform fabrication of ceramics via stereolithography[J]. Journal of the American CeramicSociety, 2010, 79(10):2601-2608.
Windshimer H, Travitzky N, Hofenauer A , et al.Laminated object manufacturing of preceramic-paper-derived SiSiC composites[J]. Advanced Materials, 2007, 19 ( 24 ): 4515-4519
Yen Yue1, Zhang Le.3D Research Progress on Printed Ceramic Materials[J].Materials Bulletin A: Review, November 2016 (A), Vol. 30, No. 11, 110.
Cai Jia-wei, ZhangBai-cheng.Indirect 3D printed ceramic: A literature review.[J]. Cent. South Univ. (2021) 28: 983−1002
Chia H, Wu B M. . Recent advances in 3D printing of biomaterials[J]. Journal of Biological Engineering, 2015,9(1) :4.
M. Krinitcyn, Z. Fu, J. Harris, K. Kostikov, G.A. Pribytkov, P. Greil, N. Travitzky, Laminated Object Manufacturing of in-situ synthesized MAX-phase composites,Ceramics International 43 (12) (2017) 9241–9245.
Stansbury J W, Idacavage M J. .3D printing with polymers: challenges among expanding options and opportunities[J]. Dental Materials , 2016 ,32(1) : 54-64.
Spoath S, Seitz H. Influence of grain size and grair size distribution on work ability of granules with 3D printing[J]. International Journal of Advanced ManufacturingTechnology, 2014, 70(1/4):135-144.
Wang Yanqing,Shen Jingxing.3D Application and research status of printing materials[J]Journal of Aeronautical Materials2016,V01.36 No.4 P.89—98.
H. Yang, S. Yang, X. Chi, J.R. Evans, Fine ceramic lattices prepared by extrusion freeforming, Journal of Biomedical Materials Research Part B: Applied Biomaterials 79 (1) (2006) 116–121.
Polzin C, Gunther, Seitz H . 3D printing of porousAl O3 and SiC ceramics[J]. Journal of Ceramic Science &. Tech-nology, 2015, 6(2):141-146
Cappi B, Ozkol E, Ebert J , et al. Direct inkjet printing of Si3N4: characterization of ink, green bodies and microstructure[J]. Journal of the European Ceramic Society, 2008, 28 (13) : 2625-2628
K.A. Seerden, N. Reis, J.R. Evans, P.S. Grant, J.W. Halloran, B. Derby, Ink‐jet printing of wax‐based alumina suspensions, Journal of the American Ceramic Society 84 (11) (2001) 2514–2520.
Feng Zhang , Zongan L.A review of 3D printed porous ceramics[J] .Journal of the European Ceramic Society 42 (2022) 3351–3373.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
