Review on Current Application of Microchannel Heat Exchanger
DOI:
https://doi.org/10.54097/ajst.v6i3.10165Keywords:
Micro channel heat exchanger, Refrigerator, Air conditioning, Refrigeration.Abstract
This paper considers various applications of heat exchangers in refrigerators, air conditioning, and nuclear power plants in recent years, current issues and trends, including the required capacity of refrigerator heat exchanger and the corresponding advantages of microchannel heat exchanger, refrigerator application of frost problems, ash problems and improve the performance of the relevant research; Examples of application of microchannel heat exchanger in air conditioning, comparison with traditional heat exchanger, and improvements to problems such as frost, the distribution of fluids, corrosion found in experiments; Study on advantages of compact microchannel heat exchanger in nuclear power plant. The purpose of this paper is to fill the gap in the application of microchannel heat exchanger and provide reference for future research.
Downloads
References
Tuckerman D B, Pease R F W. (1981) High-performance heat sinking for VLSI. IEEE Electron Device Letters, 2(5): 126-129.
Boeng J, Marcon A A, Hermes C J L. (2020) Air-side heat transfer and pressure drop characteristics of microchannel evaporators for household refrigerators. International Journal of Heat and Mass Transfer, 147.
Sheng W, Liu P, Dang C, et al. (2017) Review of restraint frost method on cold surface. Renewable and Sustainable Energy Reviews, 79: 806-813.
Zhang C, Tang Z, Zhang Z, et al. (2018) Impact of airside fouling on microchannel heat exchangers. Applied Thermal Engineering, 128: 42-50.
Abeykoon C. (2020) Compact heat exchangers – Design and optimization with CFD. International Journal of Heat and Mass Transfer, 146.
Boeng J, Rametta R S, Melo C, et al. (2020) Thermal-hydraulic characterization and system-level optimization of microchannel condensers for household refrigeration applications. Thermal Science and Engineering Progress, 20.
Gupta A, Roy A, Gupta S, et al. (2020) Numerical investigation towards implementation of punched winglet as vortex generator for performance improvement of a fin-and-tube heat exchanger. International Journal of Heat and Mass Transfer, 149.
Elarem R, Mellouli S, Abhilash E, et al. (2017) Performance analysis of a household refrigerator integrating a PCM heat exchanger. Applied Thermal Engineering, 125: 1320-1333.
Hong S H, Jang D S, Yun S, et al. (2020) Performance improvement of heat pumps using novel microchannel heat exchangers with plain-louver fins during periodic frosting and defrosting cycles in electric vehicles. Energy Conversion and Management, 223.
Chen M, Sun X, Christensen R N. (2019) Thermal-hydraulic performance of printed circuit heat exchangers with zigzag flow channels. International Journal of Heat and Mass Transfer, 130: 356-367.
Huang C, Cai W, Wang Y, et al. (2019) Review on the characteristics of flow and heat transfer in printed circuit heat exchangers. Applied Thermal Engineering, 153: 190-205.
Zhang H, Guo J, Cui X, et al. (2021) Experimental and numerical investigations of thermal-hydraulic characteristics in a novel airfoil fin heat exchanger. International Journal of Heat and Mass Transfer, 2021, 175.
Downloads
Published
Issue
Section
How to Cite
