On the Determination of the Chip Nozzle Recognition System by Using Machine Vision

Authors

  • Jing Qiu
  • Yun Xu
  • Siyi Liu

DOI:

https://doi.org/10.54097/fbem.v1i3.21

Keywords:

Vision, Image processing, Vacuum nozzle, Halcon

Abstract

To solve the problem of chip damage caused by the using the wrong type of vacuum nozzle during the packaging of semiconductor chips. A recognition system of vacuum nozzle based on machine vision was proposed. In this research, 29 kinds of lifting nozzles are selected as test samples. The backlight intensity of two lifting nozzle images (one strong and one weak separately) is collected at the first beginning. Then, the Blob analysis method is using to analyze the weak backlighting image. The area of the lifting nozzle and the minimum outer rectangular feature can be obtained subsequently. To identify the shape of the liftin nozzle (round or square), the area ratio is calculated. At the same time, the minimum outer rectangular of the lifting nozzle is selected as the reference rectangle. Then, construct the measurement rectangle. The 2-dimensional size of the lifting nozzle is measured as well. Meanwhile, for the strong backlight image, the average value of the grayscale which located within the minimum outer rectangle is calculated. Therefore, the color (black, white, or beige) of the nozzle can be identified. Finally, the sample data is saved to the database as the sample database. During the recognition process, the shape, color, and size of the lifting nozzle being analyzing are using as the parameter to realize the condition inquire. The experimental results show that the recognition accuracy of this method is 98.85%, and the recognition time of one nozzle is around 1 second, which meets the requirements of practical application.

Downloads

Download data is not yet available.

References

Zhang Buyang. Research on key technologies of visual positioning during semiconductor chip packaging [D]. Wuhan, Hubei: Huazhong University of Science and Technology, 2016.

Zhang Jingping. Design of QFN chip surface inspection system based on machine vision [D]. Nanjing: Southeast University, 2017.

Zhang Jichun, Zhang Senlin, He Yan. Design of HALCON-based optical fiber transceiver PCB board patch target detection and correction system [J]. Light Industry Machinery, 2019, 37(4): 67-72.

Xiao Jinhui, Xiang Xinjian. Halcon-based steel rule end-edge measurement system design[J]. Journal of Zhejiang University of Science and Technology, 2018, 30(6): 488-495.

Yue Hao, Wu Shuanhu, Xu Jindong, et al. Design of medical bottle cap quality inspection system based on machine vision[J]. Instrument Technology and Sensors, 2019, 10: 83-107.

Fu Gui, Liu Liwen, Guo Xiangchuan. Research on bearing seat classification and recognition system based on machine vision[J]. Mechanical and Electrical Engineering, 2019, 36(10): 1115-1118.

Chen Junren, Gao Fengqiang, Xiong Kui. Design and implementation of a shoe mold glue spray system based on machine vision[J]. Internet of Things Technology, 2019, 5:40-42.

Zhu Xianfeng, Pan Hongjun. Defect detection and one-dimensional measurement of toner cartridge based on Halcon[J]. Journal of Jilin University (Information Science Edition), 2014, 32(3) 308-315.

Zhang Chi, Li Yuanbo, Wang Meimei, Chen Long. Electroacoustic device solder joint positioning system based on Halcon[J]. Electric Welding Machine, 2017, 47(3): 49-53.

Zheng Liqiang, Zhao Fei, Guo Jiangtao. Jewelry recognition is based on machine vision[J]. Computer Technology and Automation, 2019, 38(3): 103-106.

Downloads

Published

05-06-2021

Issue

Section

Articles