Design of High-speed Data Transmission System Based on Fiber-PCIE

Mingqiang Zeng; Changzhong Chen

doi:10.54097/fbem.v7i3.5397

Authors

Mingqiang Zeng
Changzhong Chen

DOI:

https://doi.org/10.54097/fbem.v7i3.5397

Keywords:

FPGA, PCIe, Optical fiber, DDR3, Dynamic pace.

Abstract

In this paper, a high-speed data transmission system based on optical fiber and PCIE is proposed. The system is implemented on the platform of Xilinx's FPGA. The Transceiver IP core in the FPGA is used to design the GTX high-speed interface, and the optical module with high-speed data transmission communication performance is selected for data transmission, and then the data is stored in DDR3. On the software side, PCIE communication logic is configured through embedded (SDK) development and exemplified XDMA IP core to achieve dynamic speed allocation, data receiving and sending, and data transmission. The reconfigurable technology of FPGA is used to configure different transmission rates of optical fiber communication by switching QPLL and CPLL during system operation, which increases the flexibility of the system. The physical test shows that the proposed system is effective in data transmission, has high data accuracy, and the transmission rate can be switched at any time.

Downloads

Download data is not yet available.

References

L.K.Ma: Design of high-speed data transmission terminal platform for satellite ground station, Telecommunication Engineering, vol. 60 (2020), 1420-1424.

H.Zhao, K.Song, K.Li, C.Wu and Z.Chen, "A High-Speed Well Logging Telemetry System Based on Low-Power FPGA," in IEEE Access, vol. 9 (2021), p. 8178-8191.

Z.M.Zhao, Y.L. Pei, G.H. Liang, et al. Design and Implementation of Small Marine Magnetic Data Acquisition System Based on Multi-rotor UAV, Ocean Technology, vol. 40 (2021), 43-50.

Afsal S. et al., A novel approach for the enhancement of Fiber optic communication using EDFA, International Conference on Wireless Communications, Signal Processing and Networking (Yangzhou, Jiangsu, China, October 13-15, 2016) , p. 23-27.

G.Y.Zhen, H.S. Su, J.J. Chen, et al. Design and Implementation of Data Transmission of PCIe Interface Based on FPGA, Foreign Electronic Measurement Technology, vol. 40 (2021).

X.M.Wang, Y.Z. Lu, L.F. Meng, et al. Design of Ultra High Speed Data Transmission System Based on FPGA and USB 3.0, Modern Electronic Technology, vol. 45 (2022), p. 71-74.

G.P.Lu, H.Q. Wang,B. Li, et al. Design of a high-speed data transmission system based on STM32 Ethernet, vol. 40 (2021), p. 58-62.

C.L.Yang, L.Zuo. Design of general optical fiber communication system based on FPGA, Application of Electronic Technique, vol. 46 (2020), p. 110-113.

J.M.Li, Z.W.Zheng. Design of high-speed data transmission interface based on LVDS and USB3.0, vol. 44 (2021), p. 1-6.

Y.T.Wang, Z.C.Xue, F.Wen. Design of Ethernet high-speed data transmission system based on W5300. International Electronic Elements | Int Electr Elem, vol. 29 (2021), p. 49-52+59.

B.Z.Li, J.Li, C.J.Hu, et al. Design of high-speed data acquisition and transmission circuit for on-board measurement and control system, Journal of North University of China(Natural Science Edition), vol. 41 (2020), p.571-576.

W.J.Cai, Y.Wu, P.Zou, et al. Design and Implementation of Optical Fiber Communication Board Based on FPGA and PXIE Bus, Electronic Measurement Technology, vol. 44 (2021), p. 1-6.

X.M.Yuan, L.T.Xu. Design of high-speed optical fiber communication baseband board based on FPGA, Electronic Engineering & Product World, vol. 25 (2018), p. 58-61.

Y.L.Zhou, X.Z.Luo, Z.Li , et al. Design of high-speed ADC acquisition system based on PCIe interface, Journal of Hubei University(Natural Science), vol. (2022), p. 1-6.

C.X.Zhou, G.Q.Zeng. Design of high-speed data transmission interface based on USB 3.0, Computer Measurement and Control, vol. 28 (2020), p. 146-150.