Development and Application of Flatness Analysis System based on Coordinate Measuring Data
DOI:
https://doi.org/10.54097/hset.v15i.2205Keywords:
Flatness Analysis System; Coordinate Measuring Data; Four Evaluation Methods.Abstract
To realize flatness error evaluation based on coordinate measuring data, the calculation process of four evaluation methods was analyzed, and a direct calculation method of minimum zone flatness was proposed. According to the calculation process of different evaluation methods, the flatness error analysis system based on coordinate measuring data was developed, and the accuracy of the system was verified by importing the case data of related research. The practicability of the system was verified by using the developed system in the measurement task.
Downloads
References
GB/T 11337-2004 Measurement of departures from flatness. Standards Press of China, 2004.
GB/T 1958-2017 Geometrical Product Specifications(GPS)- Geometrical tolerance-Verification. Standards Press of China, 2017.
Wang Qing, Gu Yang. Flatness metrology - value transfer and control of point, section and surface[J]. Acta Metrologica Sinica, 2019, 40(2), 189-195.
Wang Wei. Fast calculation of flatness based on Matlab[J]. Information Technique & Control, 2011, 21 (6), 11-12.
Xing Minjian, Chen Hao, Xu Jingyang. An automatic verification system for flatness error of large-scale flat plate based on least squares method[J]. SHANGHAI MEASUREMENT AND TESTING, 2017, 2 (258), 18-21.
Xu Jingyang, Chu Xuening. Study on mathematical model in flatness measurement[J]. SHANGHAI MEASUREMENT AND TESTING, 2006, 3(193), 29-31.
Liu Ping. Study on the convex and concave character of flatness error objective function[J]. Journal of Astronautic Metrology and Measurement, 2002, 22(6), 14-17.
Lei Xian-qing, Li Fei, Tu Xian-ping, Wang Shi-feng. Geometry searching approximation algorithm for flatness error evaluation[J]. Optics and Precision Engineering, 2013, 21(5), 1312-1316.
Li Shujuan. Software Develop of Form Error Evaluation based on Coordinate Measuring Datas[D]. Xi’an University of Technology, 2006.
Bi Li-heng, Zhu Yan-qi. Flatness Error Evaluation based on Grouped Partical Swarm Optimization Algorithm [J]. Acta Metrologica Sinica, 2019, 40(6), 980-985.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
