Investigation report of aero engine air die hole processing
DOI:
https://doi.org/10.54097/fcis.v2i1.3166Keywords:
Air film, Hole aerospace, ProcessAbstract
At present, there are a variety of problems in the aerospace manufacturing industry, especially the machining of aero-engine air film holes. In this paper, by investigating the current research status of aero-engine gas film hole machining at home and abroad, the characteristics and difficulties of the current gas film hole machining are introduced, and the comparison between ordinary laser machining and femtosecond laser machining is made.
Downloads
References
Zhang Yunlong, Sun Shufeng, Wang Qian, Zhang Fengyun, Liu Li, Liu Shiguang. Study on the quality of microhole in Laser Machining [J/OL]. Advances in Laser and Optoelectronics :1-31.
Egashira K, Mizutani K. Micro-drilling of monocrystalline silicon using a cutting tool[J]. Precision Engineering, 2002, 26(3): 263-268.
Lee T C, Chan C W. Mechanism of the Ultrasonic Machining of Ceramic Composites[J]. Journal of Materials Processing Technology, 1997, 71(2): 195-201.
Wang J, Zhang J , Feng P . Effects of tool vibration on fiber fracture in rotary ultrasonic machining of C/SiC ceramic matrix composites [J]. Composites Part B: Engineering, 2017, 129 : 233-242.
Houxiao W, Sukai Z, Anand A, et al. Experimental characterization of laser trepanning performance enhanced by water-based ultrasonic assistance[J]. Optics & Laser Technology, 2019, 109: 547-560.
Wei C, Zhao L, Hu D, et al. Electrical discharge machining of ceramic matrix composites with ceramic fiber reinforcements [J]. International Journal of Advanced Manufacturing Technology , 2013, 64 (1-4): 187-194.
Muttamara A, Fukuzawa Y, Mohri N, et al. Probability of precision micro-machining of insulating Si3N4 ceramics by EDM[J]. Journal of Materials Processing Technology, 2003, 140 (1-3) : 243-247.
Ahn S H, Ryu S H, Choi D K, et al. Electro-chemical micro drilling using ultra short pulses[J]. Precision Engineering, 2004, 28(2): 129-134.
Dubey A K, Yadava V. Experimental study of Nd:YAG laser beam machining – An overview[J]. Journal of Materials Processing Technology, 2008, 195(1-3):15-26.
Kononenko T V, Ralchenko V G, Vlasov I I, et al. Ablation of CVD diamond with nanosecond laser pulses of UV -- IR range 1[J]. Diamond & Related Materials, 1998, 31 (1) : 1-8.7 (11-12) : 1623-1627.
Mcelroy S, Yang D, Reddy R. Laser processing of titanium aluminides[J]. Journal of Materials Engineering & Performance, 2000, 9(5): 506-515.
She J C, An S, Deng S Z, et al. Laser welding of a single tungsten oxide nanotip on a handleable tungsten wire: A demonstration of laser-weld nanoassembly[J]. Applied Physics Letters, 2007, 90(7): 393.
Zhang X C, Qian J, Fu Q, et al. Cutting of PBO Fiber-Reinforced Composites Using Picosecond Lasers[J]. Chinese Journal of Lasers, 2020, 47(10): 1002004.
Zhang Xuecong, Qian Jing, Fu Qiang, et al. Picosecond laser Cutting of PBO fiber reinforced Composites [J]. Chinese Journal of Lasers, 2020, 20 (2) : 59-60.47 (10) : 1002004.
De Leon A C, Chen Q, Palaganas N B , et al. High performance polymer nanocomposites for additive manufacturing applications[J]. Reactive & Functional Polymers, 2016, 103(6.):141-155.
Mazumder J, Dutta D, Kikuchi N, et al. Closed loop direct metal deposition: art to part[J].Optics & Lasers in Engineering, 2000, 34(4-6): 397-414.
Samant A N, Dahotre N B. Laser machining of structural ceramics -- A review[J]. Journal of Ceramics the European Ceramic Society, 2009, 29( 6): 969-993.
Downloads
Published
Issue
Section
How to Cite
