Design of 3D-Printed Prosthetics for Disabled Pets
DOI:
https://doi.org/10.54097/vyacjp14Keywords:
Ergonomics, 3D Printing, Dog Prosthetics, Biomechanics, Pet Mobility, Animal WelfareAbstract
Pets play a vital role in human lives, yet approximately 10% of pets in the EU and USA are disabled, facing challenges with traditional prosthetics due to high costs and surgical risks. This study explores the application of 3D printing technology to develop customizable and affordable prosthetics for disabled pets, focusing on dogs. By leveraging advancements in material science, biomechanics, and veterinary medicine, the research designs a multidisciplinary framework for creating prosthetics that are more accessible and comfortable. Preliminary findings indicate that 3D printing significantly reduces production costs and time while enhancing functionality and aesthetics. This study aims to improve the quality of life for disabled pets and contribute to the broader field of assistive technologies.
Downloads
References
[1] Platero, L., Garcia-Sanchez, P., Sainz, T., Calvo, C., Iglesias, I., Esperon, F., ... & Mendez-Echevarria, A. (2022). Pets for pediatric transplant recipients: to have or not to have. Frontiers in Veterinary Science, 9, 974665.
[2] Vos, S. J., Wijnker, J. J., & Overgaauw, P. A. M. (2021). A pilot study on the contamination of assistance dogs’ paws and their users’ shoe soles in relation to admittance to hospitals and (in)visible disability. International Journal of Environmental Research and Public Health, 18(2), 513.
[3] Gupta, S., & Goil, P. (2021). USE of 3D printing and virtual 3D imaging to aid mandibular reconstruction; A low cost, easy and reproducible methodology at our centre. Journal of Plastic, Reconstructive & Aesthetic Surgery, 74(5), 1101-1160.
[4] Gao, D., Zhang, C., & Zhang, J. (2023). Compressive behavior of a novel hexagonal nodes-based 3D chiral auxetic structure. Applied Sciences, 13(14), 8480.
[5] Mushtaq, R. T., Iqbal, A., Wang, Y., Khan, A. M., & Petra, M. I. (2023). Advancing PLA 3D printing with laser polishing: improving mechanical strength, sustainability, and surface quality. Crystals, 13(4), 626.
[6] Marcellin-Little, D. J., Drum, M. G., Levine, D., & McDonald, S. S. (2015). Orthoses and exoprostheses for companion animals. Veterinary Clinics: Small Animal Practice, 45(1), 167–183.
[7] McAlpine, M. C. (2018, April). 3D Printing Functional Materials & Devices. In Electrochemical Society Meeting Abstracts 233(No. 26, pp. 1532-1532). The Electrochemical Society, Inc...
[8] Advancing PLA 3D printing with laser polishing: Improving mechanical strength, sustainability, and surface quality. Crystals, 13(4), 626.
[9] Solomon, E., & Yerazunis, W. S. (2021). Robotic applications of mechanical metamaterials produced using SLA 3D printing: Cthulhu-Morphic Grippers. In 2021 International Solid Freeform Fabrication Symposium. University of Texas at Austin.
[10] Van der Stelt, M., Verhulst, A. C., Slump, C. H., Papenburg, M., Grobusch, M. P., Brouwers, L., & Maal, T. J. (2021). Design and production of low-cost 3D-printed transtibial prosthetic sockets. Journal of Prosthetics and Orthotics, 35, e30–e36.
[11] Wendland, T. M., Seguin, B., & Duerr, F. M. (2019). Retrospective multi-center analysis of canine socket prostheses for partial limbs. Frontiers in veterinary science, 100.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 International Journal of Education and Humanities
This work is licensed under a Creative Commons Attribution 4.0 International License.
